Skip to content

Brand

Flashforge

Printers described in full, filament described as something else

Flashforge printers

The Adventurer 5M publishes its 220 mm build volume in three dimensions, its CoreXY frame and four quick-change nozzle sizes. The Creator 5 Pro gives four independent toolheads, a heated chamber to 65 °C and named HEPA and carbon filters, though not its build volume.

Flashforge accessories

An enclosure kit for the AD5X, part acrylic and part printed at home from Flashforge’s own files; and two filaments from the same catalogue.

Flashforge filament pages

The ABS Burnt Titanium spool and the carbon-fibre PETG both carry second, third and fourth bullets written for PLA. Both are dried for 24 hours and vacuum-sealed, and neither gives print temperatures. On the printer side, the quick-change nozzles come only from Flashforge’s own range.

Flashforge on the MakerVerdict bench

  • FDM 3D printers

    Flashforge Adventurer 5M, 220 mm CoreXY

    220 × 220 × 220 mm build volume · all-metal CoreXY · one-click automatic levelling · 3-second quick-change nozzles 0.25 to 0.8 mm · double-sided PEI plate · 600 mm/s maximum

    A CoreXY printer with a 220 mm cube build volume, tool-free nozzles in four diameters that change in three seconds, and a double-sided PEI plate whose back is meant for PETG.

    Best for: Someone printing everyday PLA and PETG parts who wants a published 220 mm volume and the option of a fine or a fast nozzle.

    ≈ 249 €

    Check price on Amazon Read the review
  • Multicolour 3D printers

    Flashforge Creator 5 Pro, four toolheads

    4 independent toolheads · zero-purge-waste colour changes claimed · heated chamber up to 65 °C · dual HEPA and carbon filters · 600 mm/s maximum · no build volume published

    A four-toolhead multi-material printer with an active heated chamber up to 65 °C and dual HEPA and carbon filters, whose listing claims colour changes without purge waste and publishes no build volume.

    Best for: A workshop printing multi-material parts in engineering plastics, where a heated chamber and filtration matter as much as colour.

    ≈ £829 / 899 €

    Check price on Amazon Read the review

Flashforge parts and supplies on the bench

  • Flashforge Burnt Titanium colour-shift ABS filament spool

    Flashforge ABS 1.75 mm, Burnt Titanium colour-shift, 1 kg

    A 1 kg spool of Flashforge ABS in a Burnt Titanium colour that changes with light and viewing angle, dried for 24 hours and vacuum-sealed with desiccant, whose bullets describe the product as PLA in three places.

    Diameter tolerance
    Absent from the listing as a figure — dimensional accuracy is claimed, fourth bullet
    Net weight
    1 kg, title
    Recommended temperatures
    Absent from the listing
    Warping guidance
    Absent from the listing — low shrinkage and no warping are claimed, first and fourth bullets
    UV resistance
    Absent from the listing
    Fume guidance
    Absent from the listing
    Spool size
    Absent from the listing
    Amazon reference
    B0CRKVJGF8 (same reference on 6 Amazon marketplaces)
    EAN
    6937120307013
    • A colour-shift finish that changes with light and angle
    • Dried for 24 hours and vacuum-sealed with desiccant
    • The second, third and fourth bullets describe PLA filament

    Best for: Decorative ABS parts where the colour effect is the point, printed in an enclosure.

    ≈ £31 / 26 €
    Check price on Amazon
  • Flashforge AD5X enclosure kit parts: panels, screws, tools and installation guide

    Flashforge Enclosure kit for the Flashforge AD5X, print-your-own parts

    An enclosure kit for the Flashforge AD5X that supplies acrylic panels and screws, while the frame parts are printed by the owner in PLA from STL files on the Flashforge wiki, to print ABS, ASA and PC.

    Inner dimensions
    Absent from the listing
    Materials
    Acrylic panels and screws supplied; the remaining parts printed in PLA by the owner, first bullet
    Ventilation and filtration
    Absent from the listing
    Doors
    Absent from the listing
    Cable ports
    Absent from the listing
    Published fire rating
    Absent from the listing
    Amazon reference
    B0FP574M41 (same reference on 6 Amazon marketplaces)
    EAN
    6937120359067
    • Made by Flashforge for its own AD5X printer
    • Turns the AD5X into a closed system for ABS, ASA and PC, as the second bullet states
    • Most of the parts must be printed by the owner before assembly

    Best for: An AD5X owner who wants to print engineering filaments and does not mind printing the frame first.

    ≈ $49 / £43 / 49 €
    Check price on Amazon
  • Flashforge PETG-CF black filament spool

    Flashforge PETG carbon fibre 1.75 mm ±0.02 mm, black, 1 kg

    A 1 kg spool of black Flashforge PETG-CF in 1.75 mm ±0.02 mm, reinforced with carbon fibre for strength and heat resistance, dried for 24 hours and vacuum-sealed, whose later bullets describe PLA.

    Base polymer
    PETG, title and first bullet
    Filler
    Carbon fibre reinforcement, first bullet
    Nozzle requirement
    Absent from the listing
    Recommended temperatures
    Absent from the listing
    Drying advice
    Absent from the listing as advice — dried 24 hours before packing, vacuum-sealed with desiccant, second bullet
    Net weight
    1 kg, title
    Finish
    Absent from the listing
    Amazon reference
    B0CNYX58SV (same reference on 6 Amazon marketplaces)
    EAN
    6937120306856
    • Carbon fibre reinforcement for strength and temperature resistance, keeping PETG’s impact resistance, as stated
    • A ±0.02 mm tolerance in the title
    • The second, third and fourth bullets describe PLA

    Best for: Stiffer PETG parts for a Flashforge owner who will set temperatures from the maker’s profile.

    ≈ $26 / 26 €
    Check price on Amazon

A price quoted in the text of a MakerVerdict page dates from the day that page was written; the live figure beside each product is fetched while you read and replaces it.