Pixel pitch describes the screen, not the tolerance of the part · review
A 7-inch 10K resin printer with 17 × 17 µm pixels and a stated 153.4 × 87 × 165 mm volume, leveled by hand with a 4-point method.
Anycubic gives 9024 × 5120 pixels at 17 × 17 µm and a build volume of 153.4 × 87 × 165 mm. Many resin listings print only one of those, so this one is easy to compare.
A 4-point leveling routine takes a few minutes and holds until the plate is disturbed. It is fine for most owners, though the Mars 5 does it automatically.
The listing states that the Anycubic app does not support this printer. If phone monitoring matters, look at the models with Wi-Fi.
| Screen | 7-inch 10K mono LCD, 9024 × 5120 |
|---|---|
| Pixel size | 17 × 17 µm, stated |
| Build volume | 153.4 × 87 × 165 mm (6.04 × 3.42 × 6.49 in) |
| Light | LighTurbo matrix light source |
| Leveling | 4-point manual |
| Power loss | Can resume printing |
| App | Anycubic app not supported on this model |
| Amazon ASIN | B0DB887MCD |
No. The listing says the app service is not supported on the Photon Mono 4.
It is the maker’s comparison with the Mono 2. The figure to use is the 17 × 17 µm pixel, and that describes the screen, not a part tolerance.
8.0/ 10
The best detail for the price here, and honest about its limits. Choose the Mono 4 Ultra if you want Wi-Fi and faster printing.
workshop machines from the same category, at nearby prices. Only what all of them publish is shown: a column with holes compares nothing.
| Model | Price | Screen |
|---|---|---|
| Anycubic Photon Mono 4 | $210 | 7-inch 10K mono LCD, 9024 × 5120 |
| ELEGOO Mars 5 | $200 | 4K mono LCD |
| ELEGOO Mars 5 Ultra | $300 | 7-inch 9K mono LCD |
| Anycubic Photon Mono 4 Ultra | $330 | 7-inch 10K, 9024 × 5120 |
A detail-minded buyer who can level by hand and wants the most pixels for the money.
Specifications: the manufacturer sheet for maker machines and tools and the matching Amazon product page. Prices and availability: Keepa. Every figure on this page names its source.
MSLA resin · 7-in 10K · 9024 × 5120 · 17 × 17 µm · ACF film · up to 120 mm/h · COB with Fresnel lens · light uniformity ≥90%
The faster Mono 4: ACF film and a release algorithm raise the stated top speed to 120 mm/h, on the same 17 × 17 µm 10K screen, with a COB and Fresnel light.
Best for: A resin owner who values speed and printing checks on a 7-inch machine.
≈ $330
MSLA resin · 7-in 9K mono LCD · 18 µm XY · tilt release · up to 150 mm/h · AI camera · Wi-Fi
A 7-inch 9K resin printer with 18 µm XY resolution, a tilting release that the listing rates up to 150 mm/h, an AI camera and Wi-Fi.
Best for: A miniature painter or jewelry modeler who wants fine pixels and remote checking.
≈ $300
MSLA resin · 4K mono LCD · COB light source · one-click automatic leveling · residue detection · overheat stop at 80 °C
ELEGOO’s entry resin printer, with a 4K mono LCD, a COB light source, one-click automatic leveling and alarms for resin shortages and leveling failures.
Best for: A first resin buyer who wants the machine to level and check itself.
≈ $200
A price quoted in the text of a MakerVerdict page dates from the day that page was written; the live figure beside each product is fetched while you read and replaces it.
