Washing and curing finish a resin part, and both happen in this box · review
A one-box wash and cure station with Flexicure gooseneck lights, a dual-layer basket that saves IPA, and one-click mode selection.
If you run a 7-inch printer, this station covers it.
The feature that sets Anycubic apart: curing inside hollows, where a ring light does not reach.
IPA is flammable, and resin waste needs proper disposal.
| Basket | Dual-layer PP, 42% larger than Wash & Cure 2 |
|---|---|
| Curing | Flexicure gooseneck lights |
| Light | 20% better uniformity, stated |
| Modes | Wash and cure, one click |
| Amazon ASIN | B083GTS8XJ |
They bend to reach hollow or shadowed areas.
That depends on the resin. Follow the resin maker’s instructions.
8.5/ 10
The default station for small printers.
workshop machines from the same category, at nearby prices. Only what all of them publish is shown: a column with holes compares nothing.
| Model | Price | Curing |
|---|---|---|
| Anycubic Wash and Cure 3 | $130 | Flexicure gooseneck lights |
| ELEGOO Mercury Plus 3.0 Larger | $140 | 24 × 405 nm LEDs, reflective mirror |
| ELEGOO Mercury Plus 3.0 | $150 | 24 × 405 nm UV lights, 360° |
| Anycubic Wash and Cure 3 Plus | $220 | Gooseneck lights, double-layer platform |
A 7-inch resin printer owner.
Specifications: the manufacturer sheet for maker machines and tools and the matching Amazon product page. Prices and availability: Keepa. Every figure on this page names its source.
Wash and cure station · washing size 8.97 × 5.03 × 10.23 in · gooseneck lights · two-layer curing platform
The larger Anycubic station, washing parts up to 8.97 × 5.03 × 10.23 inches, with gooseneck lights and a two-layer curing platform.
Best for: A Saturn-class resin owner.
≈ $220
Large wash and cure station · 305 × 165 × 300 mm · 15.1 L · 360° spray rinse · 360° rotating curing platform · auto mode
A very large station with a 305 × 165 × 300 mm wash size and 15.1 liters of liquid, 360° spray rinsing and a rotating curing platform.
Best for: A shop running a large-format resin printer.
≈ $370
Wash and cure station · 7.5 L · 114% more capacity than 2.0 · 24 × 405 nm LEDs · compatible with printers up to 10 in
The same 7.5-liter Mercury Plus 3.0 sold under a different listing, with a reflective mirror around 24 LEDs and support for printers up to 10 inches.
Best for: A 10-inch printer owner buying on price.
≈ $140
A price quoted in the text of a MakerVerdict page dates from the day that page was written; the live figure beside each product is fetched while you read and replaces it.
