228 × 128 × 260 mm wash size, 7.6 l basket · two basket heights, 150 and 250 mm · Flexicure gooseneck light · two-layer curing platform · for 6.6–10.6 in platforms
A wash and cure station with a 228 × 128 × 260 mm wash size and a 7.6 litre two-layer basket that washes with the build platform attached, and a rotatable gooseneck light for curing hidden areas.
Best for: An owner of a resin printer up to 10.6 inches who wants to wash parts on the platform and cure larger or taller models.
A replacement V5 J-head hotend with a Volcano nozzle and 24 V ceramic heater cartridge for the Anycubic Vyper, Kobra Max and Kobra Plus 3D printers, with plug-in thermistor and heater and a note on what to check if an NTC error appears.
Printer fit
Only Anycubic Vyper, Kobra Max and Kobra Plus; not Kobra Neo or Kobra Go, first bullet
Maximum temperature
Absent from the listing
Heat break
Absent from the listing — V5 J-head in the title
Nozzle standard
Volcano brass nozzle, title and second and fifth bullets; size absent from the listing
Heater and thermistor
24 V ceramic heater cartridge, title; thermistor and heater both supplied with a plug, third bullet
Cooling
Absent from the listing text — the product photograph shows a finned silver heatsink
Melt zone
Volcano design, said to heat the print head evenly, second bullet; no length given
Amazon reference
B09DKQ98L3 (same reference on 6 Amazon marketplaces)
EAN
0770490052598
The printers it does not fit are named: Kobra Neo and Kobra Go
Plug-in thermistor and heater, no wiring
No temperature figure
Best for: An Anycubic Vyper, Kobra Max or Kobra Plus owner replacing the hotend with a plug-in part.
A price quoted in the text of a MakerVerdict page dates from the day that page was written; the live figure beside each product is fetched while you read and replaces it.
