Damp filament strings and pops, and a dryer is cheaper than a failed print · review
A dual-chamber dryer for up to four 1 kg spools, with two 200 W PTC heaters reaching 185 °F (85 °C), an automatic mode and a touchscreen.
Eighty-five degrees opens up PA and PC, within each filament maker’s limits.
Four spools match a multicolor printer.
Same stated heat and capacity, for about $40 less at our reading.
Prices quoted in this text are dated readings and can differ from the live price in the buy box.
| Capacity | 2 + 2 rolls of 1 kg |
|---|---|
| Heaters | 200 W + 200 W PTC |
| Top temperature | 185 °F (85 °C) |
| Mode | Automatic drying |
| Airflow | 360° hot air fan |
| Weight | 7.5 lb |
| Amazon ASIN | B0FP574DFT |
185 °F (85 °C), stated.
Yes: 2 + 2 rolls of 1 kg.
8.0/ 10
The value pick for serious use.
workshop machines from the same category, at nearby prices. Only what all of them publish is shown: a column with holes compares nothing.
| Model | Price | Weight |
|---|---|---|
| Comgrow SH03 | $120 | 7.5 lb |
| Creality Space Pi X4 | $159 | 1 kg in the table, which looks low |
| EIBOS Easdry | $50 | 1.35 kg (3 lb) |
| Comgrow SH01 | $44 | 1.5 kg (3.3 lb) |
A multicolor printer owner who needs four spools ready.
Specifications: the manufacturer sheet for maker machines and tools and the matching Amazon product page. Prices and availability: Keepa. Every figure on this page names its source.
Filament dryer · 2 × 1 kg spools · inner 9.29 × 6.49 × 9.13 in · 40–50 °C · temperature and humidity display
A two-spool dryer box with printed inner dimensions, but its 50 °C limit, stated by the listing, confines it to PLA and light drying.
Best for: A PLA user who wants storage plus gentle drying for two spools.
≈ $44
Filament dryer · 1 × 1 kg spool · 45–65 °C · PTC heater · 360° air · 1.75 and 2.85 mm
Creality’s single-spool dryer running from 45 to 65 °C with a PTC heater and 360° hot air, for PLA, PETG, ABS, ASA and TPU.
Best for: A PETG or ABS user with a single spool on the go.
≈ $40
Filament dryer · 4 spools · dual independent chambers · 200 W + 200 W PTC · up to 85 °C · PLA to PA and PAHT
A four-spool dryer with two independent chambers and a stated 85 °C, named for materials as demanding as PC, PA and PAHT.
Best for: A maker with mixed engineering filaments.
≈ $159
