Damp filament strings and pops, and a dryer is cheaper than a failed print · review
Creality’s single-spool dryer running from 45 to 65 °C with a PTC heater and 360° hot air, for PLA, PETG, ABS, ASA and TPU.
A title that says 45–65 °C beats the unstated limits of the SUNLU listings.
A fan moves hot air around the spool, and that speeds drying compared with a heat pad.
Sixty-five degrees will not dry PA or PC properly.
| Capacity | 1 kg spool |
|---|---|
| Temperature | 45–65 °C |
| Heating | PTC, with 360° fan |
| Control | Screen and knob |
| Filament | 1.75 and 2.85 mm |
| Weight | 1 kg |
| Amazon ASIN | B0CJ2YVVFM |
PLA, PETG, ABS, ASA and TPU, in the title.
65 °C, in the title.
8.0/ 10
A strong single-spool dryer with a printed range.
workshop machines from the same category, at nearby prices. Only what all of them publish is shown: a column with holes compares nothing.
| Model | Price | Capacity | Weight |
|---|---|---|---|
| Creality Space Pi SE | $40 | 1 kg spool | 1 kg |
| SUNLU S1 Plus | $38 | One spool, up to Φ210 × 85 mm | 2.7 lb |
| SUNLU S2 | $38 | One spool | 1.51 kg (3.3 lb) |
| Comgrow SH01 | $44 | 2 × 1 kg spools | 1.5 kg (3.3 lb) |
A PETG or ABS user with a single spool on the go.
Specifications: the manufacturer sheet for maker machines and tools and the matching Amazon product page. Prices and availability: Keepa. Every figure on this page names its source.
Filament dryer · 2 × 1 kg spools · inner 9.29 × 6.49 × 9.13 in · 40–50 °C · temperature and humidity display
A two-spool dryer box with printed inner dimensions, but its 50 °C limit, stated by the listing, confines it to PLA and light drying.
Best for: A PLA user who wants storage plus gentle drying for two spools.
≈ $44
Filament dryer · up to 4 × 1 kg spools · 200 W + 200 W PTC · up to 185 °F (85 °C) · auto mode · 360° airflow · touchscreen
A dual-chamber dryer for up to four 1 kg spools, with two 200 W PTC heaters reaching 185 °F (85 °C), an automatic mode and a touchscreen.
Best for: A multicolor printer owner who needs four spools ready.
≈ $120
Filament dryer · 4 spools · dual independent chambers · 200 W + 200 W PTC · up to 85 °C · PLA to PA and PAHT
A four-spool dryer with two independent chambers and a stated 85 °C, named for materials as demanding as PC, PA and PAHT.
Best for: A maker with mixed engineering filaments.
≈ $159
A price quoted in the text of a MakerVerdict page dates from the day that page was written; the live figure beside each product is fetched while you read and replaces it.
