Damp filament strings and pops, and a dryer is cheaper than a failed print · review
A four-spool dryer with two independent chambers and a stated 85 °C, named for materials as demanding as PC, PA and PAHT.
Independent control means PLA at low heat and nylon at high heat, side by side.
Creality says to check that plastic spools resist the heat.
If you only print one material at a time, the SH03 costs less.
| Capacity | 4 spools |
|---|---|
| Chambers | 2, independently controlled |
| Heaters | 200 W + 200 W PTC |
| Top temperature | 85 °C |
| Materials named | PLA, PETG, ABS, TPU, ASA, PC, PA, PAHT |
| Weight | 1 kg in the table, which looks low |
| Amazon ASIN | B0F7LTR3N7 |
Yes. Each chamber has its own PTC heater.
The listing warns to check that other brands’ plastic trays are heat resistant.
8.1/ 10
The best dryer here for mixed materials, because each chamber runs its own temperature.
workshop machines from the same category, at nearby prices. Only what all of them publish is shown: a column with holes compares nothing.
| Model | Price | Weight |
|---|---|---|
| Creality Space Pi X4 | $159 | 1 kg in the table, which looks low |
| Comgrow SH03 | $120 | 7.5 lb |
| EIBOS Easdry | $50 | 1.35 kg (3 lb) |
| Comgrow SH01 | $44 | 1.5 kg (3.3 lb) |
A maker with mixed engineering filaments.
Specifications: the manufacturer sheet for maker machines and tools and the matching Amazon product page. Prices and availability: Keepa. Every figure on this page names its source.
Filament dryer · 2 × 1 kg spools · inner 9.29 × 6.49 × 9.13 in · 40–50 °C · temperature and humidity display
A two-spool dryer box with printed inner dimensions, but its 50 °C limit, stated by the listing, confines it to PLA and light drying.
Best for: A PLA user who wants storage plus gentle drying for two spools.
≈ $44
Filament dryer · up to 4 × 1 kg spools · 200 W + 200 W PTC · up to 185 °F (85 °C) · auto mode · 360° airflow · touchscreen
A dual-chamber dryer for up to four 1 kg spools, with two 200 W PTC heaters reaching 185 °F (85 °C), an automatic mode and a touchscreen.
Best for: A multicolor printer owner who needs four spools ready.
≈ $120
Filament dryer · 1 × 1 kg spool · 45–65 °C · PTC heater · 360° air · 1.75 and 2.85 mm
Creality’s single-spool dryer running from 45 to 65 °C with a PTC heater and 360° hot air, for PLA, PETG, ABS, ASA and TPU.
Best for: A PETG or ABS user with a single spool on the go.
≈ $40
A price quoted in the text of a MakerVerdict page dates from the day that page was written; the live figure beside each product is fetched while you read and replaces it.
