Skip to content

Made in Europe, with its certifications named

Winkle ASA 1.75 mm, jet black, 1 kg, made in Europe

A 1 kg spool of jet-black Winkle ASA in 1.75 mm, made in Europe under ISO 9001 and ISO 14001 with REACH compliance named, with recommended nozzle and bed temperatures but no tolerance or UV figure.

Winkle jet black ASA filament spool

Winkle ASA 1.75 mm, jet black, 1 kg, made in Europe

A 1 kg spool of jet-black Winkle ASA in 1.75 mm, made in Europe under ISO 9001 and ISO 14001 with REACH compliance named, with recommended nozzle and bed temperatures but no tolerance or UV figure.

Diameter tolerance
Absent from the listing
Net weight
1 kg, title and first two bullets
Recommended temperatures
Nozzle 240–260 °C, bed 70–100 °C, fifth bullet
Warping guidance
Absent from the listing — excellent bed adhesion is claimed, third bullet
UV resistance
Absent from the listing
Fume guidance
Absent from the listing
Spool size
Absent from the listing
Amazon reference
B08LWG14LH (same reference on 6 Amazon marketplaces)
EAN
8435532912309
  • Made in Europe, with ISO 9001, ISO 14001 and REACH named
  • Recommended nozzle and bed temperatures published
  • No tolerance figure

Best for: A buyer who prefers European-made filament with named quality certifications.

≈ $29 / £15 / 21 €
Check price on Amazon

Specifications

Diameter tolerance
Absent from the listing
Net weight
1 kg, title and first two bullets
Recommended temperatures
Nozzle 240–260 °C, bed 70–100 °C, fifth bullet
Warping guidance
Absent from the listing — excellent bed adhesion is claimed, third bullet
UV resistance
Absent from the listing
Fume guidance
Absent from the listing
Spool size
Absent from the listing
Amazon reference
B08LWG14LH (same reference on 6 Amazon marketplaces)
EAN
8435532912309

The Winkle ASA listing, bullet by bullet

Five bullets: 1.75 mm and 1 kg of ASA in black; dimensional stability during printing; bed adhesion and a clean finish; manufacture in Europe under ISO 9001 and ISO 14001 certification and REACH; and recommended temperatures of 240–260 °C nozzle and 70–100 °C bed.

Certifications on the Winkle page

ISO 9001, ISO 14001, REACH. These describe a manufacturer’s quality and environmental management, and chemical regulation compliance. They are not properties of the filament, but they are verifiable facts about where and how it is made.

ASA without UV

As with the GEEETECH ASA here, UV resistance is not mentioned. The temperatures are; the reason to choose ASA over ABS is not.

A 30-degree bed range

70–100 °C is wide. The first layer usually tells where in that range a given printer and surface need to be.

Availability

At the last look-up, the German, French, Italian and Spanish Amazon stores were asking 21 € to 27 €.

It is sold in the American and British Amazon stores as well, in their own currency, which the euro figures above leave out on purpose.

Every figure here is Keepa’s reading on the date this page was last updated. Stock and prices can change at any time.

Prices quoted in this text were read on 15 September 2026. The live price is at the top of the page.

More ASA and ABS filament

  • ERYONE black ASA filament spool

    ERYONE ASA 1.75 mm ±0.03 mm, black, 1 kg, with full print settings

    A 1 kg spool of black ERYONE ASA in 1.75 mm ±0.03 mm with the most complete settings of the seven: nozzle, bed, speed, enclosed printing and drying, plus spool dimensions and a matte finish.

    Diameter tolerance
    ±0.03 mm, title and sixth bullet
    Net weight
    1 kg net; shipping weight 1.35 kg, fifth bullet
    Recommended temperatures
    Nozzle 230–260 °C, bed 75–90 °C, speed 30–50 mm/s adjusted by printer, first bullet
    Warping guidance
    Enclosed (“sealed”) printing recommended, and drying at 80–90 °C for more than 12 hours before printing, first bullet
    UV resistance
    High UV, heat and weather resistance stated, for outdoor parts, second bullet
    Fume guidance
    Absent from the listing
    Spool size
    Inner diameter 57 mm, outer diameter 200 mm, height 64 mm, fifth bullet
    Amazon reference
    B0C5H85WJR (same reference on 6 Amazon marketplaces)
    EAN
    0810168130293
    • Nozzle, bed, speed, enclosure and drying guidance all published
    • Spool dimensions given, and net and shipping weights separated
    • No fume guidance for a material that needs an enclosure

    Best for: Outdoor functional parts printed in an enclosure by someone who wants settings to start from.

    ≈ £17 / 17 €
    Check price on Amazon
  • extrudr DuraPro ASA black filament spool

    extrudr DuraPro ASA 1.75 mm, black, 750 g, made in Austria

    A 750 g spool of black extrudr DuraPro ASA in 1.75 mm, made in Austria, listing a 220–270 °C print range with 230–260 °C recommended, a bed of 90–110 °C and speeds of 20–200 mm/s.

    Diameter tolerance
    Absent from the listing
    Net weight
    750 g, title
    Recommended temperatures
    Print temperature 220–270 °C with 230–260 °C recommended; heated bed 100–110 °C with 90–110 °C recommended; speed 20–200 mm/s, second to fifth bullets
    Warping guidance
    Absent from the listing
    UV resistance
    Absent from the listing
    Fume guidance
    Absent from the listing
    Spool size
    Absent from the listing
    Amazon reference
    B082MPRJG4 (same reference on 6 Amazon marketplaces)
    EAN
    9010241202027
    • Made in Austria
    • Both a working range and a recommended range for nozzle and bed
    • A 750 g spool, less filament than the 1 kg spools here

    Best for: A European buyer who wants settings for ASA and does not mind a smaller spool.

    ≈ £33 / 26 €
    Check price on Amazon
  • GEEETECH white ASA filament spool

    GEEETECH ASA+ 1.75 mm ±0.03 mm, white, 1 kg

    A 1 kg spool of white GEEETECH ASA+ in 1.75 mm ±0.03 mm in vacuum packaging, described as heat-resistant and durable in the title, with a single bullet and no print settings.

    Diameter tolerance
    ±0.03 mm, only bullet
    Net weight
    1 kg, title and only bullet
    Recommended temperatures
    Absent from the listing
    Warping guidance
    Absent from the listing
    UV resistance
    Absent from the listing — heat resistance and durability are named in the title
    Fume guidance
    Absent from the listing
    Spool size
    Absent from the listing
    Amazon reference
    B0FGJ5FMBC (same reference on 4 Amazon marketplaces)
    EAN
    6974994176536
    • A published tolerance, ±0.03 mm
    • Vacuum packaging
    • A single bullet: no temperatures, warping or fume guidance

    Best for: A buyer who already knows how to print ASA and only needs the diameter and weight.

    ≈ 17 €
    Check price on Amazon

Elsewhere on the workbench

  • Creality gold textured PEI plate standing in front of its black Creality box

    Creality Official K2 Pro textured PEI plate, 310 × 325 mm, without magnetic base

    Creality’s official 310 × 325 mm build plate for the K2 Pro, spring steel with matte PEI powder coating on both sides, suitable for materials from PLA to PA-CF, supplied without its magnetic base.

    Size and fit
    310 × 325 mm for the Creality K2 Pro, title and first bullet
    Substrate
    Spring steel, title and first and fifth bullets
    Surface type
    Textured PEI, matte PEI powder coating on both sides, title and second bullet
    Magnetic base
    Not included: spring steel plate only, title and first bullet
    Filament suitability
    PLA, ABS, ASA, PETG, TPU, PC, PA, PLA-CF, PA-CF and PET-CF, fourth bullet
    Heat limit
    Absent from the listing — the coating is described as heat- and wear-resistant
    Amazon reference
    B0FM8GFFSX (same reference on 6 Amazon marketplaces)
    EAN
    0198549081441
    • An official Creality part for the K2 Pro
    • PEI on both sides
    • No magnetic base in the box

    Best for: A K2 Pro owner replacing a plate, or adding a second one, from the printer’s own maker.

    ≈ £19 / 28 €
    Check price on Amazon
  • MXMONK round gold textured PEI plate in front of a round black sheet

    MXMONK Round textured PEI plate 220 mm for FLSUN Q5, with magnetic base

    A round 220 mm spring steel plate from MXMONK with textured PEI powder coating on both sides, made only for the FLSUN Q5 delta printer and supplied with a self-adhesive magnetic sheet.

    Size and fit
    220 mm diameter, round, exclusively for the FLSUN Q5, first bullet; the title gives 220 × 220 mm, and the product photograph shows a round plate
    Substrate
    Spring steel, title and first and fifth bullets
    Surface type
    Textured PEI powder coating on both sides, matte finish, fifth bullet
    Magnetic base
    Strong self-adhesive magnetic sheet (B side) included, sixth bullet
    Filament suitability
    Absent from the listing
    Heat limit
    Absent from the listing — “extreme heat resistance” without a figure, third bullet
    Amazon reference
    B0FWD37X59 (same reference on 5 Amazon marketplaces)
    EAN
    0381504927452
    • The only plate of the five that lists a magnetic sheet in the box
    • Made for a round delta bed, the FLSUN Q5
    • Only for the FLSUN Q5

    Best for: A FLSUN Q5 owner who wants a removable magnetic PEI surface on the original heated bed.

    ≈ $30 / 35 €
    Check price on Amazon
  • TIOPY gold textured PEI spring steel plate with a handling tab

    TIOPY PEI spring steel plate 257 × 257 mm for Bambu Lab 3D printers

    A 257 × 257 mm PEI spring steel plate from TIOPY for Bambu Lab X1, P1, P2S and A1 printers, carrying no QR code, so the printer’s plate detection has to be turned off; its PEI is called smooth in the title and textured in the bullets.

    Size and fit
    257 × 257 mm for Bambu Lab X2D, X1, X1C, X1E, P1P, P1S, P2S and A1, title and first bullet
    Substrate
    Spring steel, title and second and fourth bullets
    Surface type
    “Smooth PEI” in the title; double-sided textured PEI in the first, fourth and fifth bullets, frosted PEI surface in the second; the product photograph shows a gold textured face
    Magnetic base
    Absent from the listing
    Filament suitability
    PLA, flexible, wood, ABS, PC, PETG, TPU and nylon, second bullet
    Heat limit
    Can be heated to over 200 °C, second bullet; no upper limit given
    Amazon reference
    B0CBH3B8GT (same reference on 6 Amazon marketplaces)
    EAN
    0738260308610
    • A plain instruction that the plate has no QR code and plate detection must be disabled
    • Named for the Bambu Lab X1, P1, P2S and A1 series
    • Smooth in the title, textured in the bullets

    Best for: A Bambu Lab X1, P1 or A1 owner who wants a spare PEI plate and can do without automatic plate detection.

    ≈ 14 €
    Check price on Amazon

All ASA and ABS filament