Skip to content

Two temperature ranges and a 750 g spool

extrudr DuraPro ASA 1.75 mm, black, 750 g, made in Austria

A 750 g spool of black extrudr DuraPro ASA in 1.75 mm, made in Austria, listing a 220–270 °C print range with 230–260 °C recommended, a bed of 90–110 °C and speeds of 20–200 mm/s.

extrudr DuraPro ASA black filament spool

extrudr DuraPro ASA 1.75 mm, black, 750 g, made in Austria

A 750 g spool of black extrudr DuraPro ASA in 1.75 mm, made in Austria, listing a 220–270 °C print range with 230–260 °C recommended, a bed of 90–110 °C and speeds of 20–200 mm/s.

Diameter tolerance
Absent from the listing
Net weight
750 g, title
Recommended temperatures
Print temperature 220–270 °C with 230–260 °C recommended; heated bed 100–110 °C with 90–110 °C recommended; speed 20–200 mm/s, second to fifth bullets
Warping guidance
Absent from the listing
UV resistance
Absent from the listing
Fume guidance
Absent from the listing
Spool size
Absent from the listing
Amazon reference
B082MPRJG4 (same reference on 6 Amazon marketplaces)
EAN
9010241202027
  • Made in Austria
  • Both a working range and a recommended range for nozzle and bed
  • A 750 g spool, less filament than the 1 kg spools here

Best for: A European buyer who wants settings for ASA and does not mind a smaller spool.

≈ £33 / 26 €
Check price on Amazon

Specifications

Diameter tolerance
Absent from the listing
Net weight
750 g, title
Recommended temperatures
Print temperature 220–270 °C with 230–260 °C recommended; heated bed 100–110 °C with 90–110 °C recommended; speed 20–200 mm/s, second to fifth bullets
Warping guidance
Absent from the listing
UV resistance
Absent from the listing
Fume guidance
Absent from the listing
Spool size
Absent from the listing
Amazon reference
B082MPRJG4 (same reference on 6 Amazon marketplaces)
EAN
9010241202027

The extrudr DuraPro ASA listing, bullet by bullet

Five short bullets: made in Austria; a heated bed temperature of 100–110 °C; a print temperature of 220–270 °C; a speed of 20–200 mm/s; and recommended temperatures of 230–260 °C at the extruder and 90–110 °C at the bed.

Two ranges, read together

220–270 °C is where it prints; 230–260 °C is where extrudr suggests starting. The bed has the same pattern with a 10-degree difference at the bottom. Read as a working window and a recommended one, the figures are consistent.

750 g, not 1 kg

The title states 750 g. At the price shown, the cost per kilogram is higher than the size of the spool first suggests, which matters when comparing with the 1 kg ASA spools here.

ASA properties left unsaid

No UV claim, no tolerance, no warping guidance. The listing is a settings card and little else.

Availability

At the last look-up, the German, French, Italian and Spanish Amazon stores were asking 26 € to 34 €.

It is sold in the American and British Amazon stores as well, in their own currency, which the euro figures above leave out on purpose.

Every figure here is Keepa’s reading on the date this page was last updated. Stock and prices can change at any time.

Prices quoted in this text were read on 15 September 2026. The live price is at the top of the page.

More ASA and ABS filament

  • GEEETECH white ASA filament spool

    GEEETECH ASA+ 1.75 mm ±0.03 mm, white, 1 kg

    A 1 kg spool of white GEEETECH ASA+ in 1.75 mm ±0.03 mm in vacuum packaging, described as heat-resistant and durable in the title, with a single bullet and no print settings.

    Diameter tolerance
    ±0.03 mm, only bullet
    Net weight
    1 kg, title and only bullet
    Recommended temperatures
    Absent from the listing
    Warping guidance
    Absent from the listing
    UV resistance
    Absent from the listing — heat resistance and durability are named in the title
    Fume guidance
    Absent from the listing
    Spool size
    Absent from the listing
    Amazon reference
    B0FGJ5FMBC (same reference on 4 Amazon marketplaces)
    EAN
    6974994176536
    • A published tolerance, ±0.03 mm
    • Vacuum packaging
    • A single bullet: no temperatures, warping or fume guidance

    Best for: A buyer who already knows how to print ASA and only needs the diameter and weight.

    ≈ 17 €
    Check price on Amazon
  • OVERTURE black ASA filament spool

    OVERTURE ASA 1.75 mm ±0.02 mm, black, 1 kg, UV-resistant

    A 1 kg spool of black OVERTURE ASA in 1.75 mm ±0.02 mm, measured by CCD in production, described as UV- and weather-resistant, dried for 24 hours and sealed in resealable foil.

    Diameter tolerance
    ±0.02 mm, with CCD diameter measurement in production, third bullet
    Net weight
    1 kg, title
    Recommended temperatures
    Absent from the listing
    Warping guidance
    Absent from the listing
    UV resistance
    Designed for excellent UV protection, with temperature resistance, first bullet
    Fume guidance
    Absent from the listing
    Spool size
    Absent from the listing
    Amazon reference
    B0CQ232T8X (same reference on 6 Amazon marketplaces)
    EAN
    0840302808535
    • The tightest tolerance of the ASA and ABS here, ±0.02 mm, with its measuring method named
    • UV and weather resistance stated
    • No temperatures or warping guidance

    Best for: Outdoor parts where diameter consistency matters, printed from a known ASA profile.

    ≈ 20 €
    Check price on Amazon
  • Flashforge Burnt Titanium colour-shift ABS filament spool

    Flashforge ABS 1.75 mm, Burnt Titanium colour-shift, 1 kg

    A 1 kg spool of Flashforge ABS in a Burnt Titanium colour that changes with light and viewing angle, dried for 24 hours and vacuum-sealed with desiccant, whose bullets describe the product as PLA in three places.

    Diameter tolerance
    Absent from the listing as a figure — dimensional accuracy is claimed, fourth bullet
    Net weight
    1 kg, title
    Recommended temperatures
    Absent from the listing
    Warping guidance
    Absent from the listing — low shrinkage and no warping are claimed, first and fourth bullets
    UV resistance
    Absent from the listing
    Fume guidance
    Absent from the listing
    Spool size
    Absent from the listing
    Amazon reference
    B0CRKVJGF8 (same reference on 6 Amazon marketplaces)
    EAN
    6937120307013
    • A colour-shift finish that changes with light and angle
    • Dried for 24 hours and vacuum-sealed with desiccant
    • The second, third and fourth bullets describe PLA filament

    Best for: Decorative ABS parts where the colour effect is the point, printed in an enclosure.

    ≈ £31 / 26 €
    Check price on Amazon

Elsewhere on the workbench

  • Long white solderless breadboard with red and blue rail lines along both edges, beside a bundle of flexible jumper wires

    CyConncet Solderless breadboard 5.4 × 16.5 cm with two distribution strips

    A solderless breadboard from CyConncet, 5.4 × 16.5 × 0.85 cm in ABS, with nickel-plated phosphor bronze spring clips, two distribution strips, top and bottom rows connected horizontally and the rest vertically, for 0.8 mm jumper wires, and joinable with other units.

    Tie points
    Two distribution strips, 200 jacks, first bullet
    Power rails
    Top and bottom rows connected horizontally and split in the middle, fourth bullet
    Contact quality
    Nickel-plated phosphor bronze spring clips, first bullet
    Backing
    Absent from the listing — ABS plastic, joinable by units, second and fifth bullets
    Wire types and lengths
    Absent from the listing — matching jumper wire diameter 0.8 mm, first and second bullets
    Gauge
    0.8 mm wire diameter, second bullet
    Pack contents
    Absent from the listing text — board size 5.4 × 16.5 × 0.85 cm, first bullet; the product photograph shows the board with a bundle of flexible jumper wires
    Amazon reference
    B0D3BZBHVS (same reference on 6 Amazon marketplaces)
    EAN
    0784633677708
    • Nickel-plated phosphor bronze contacts
    • Board size given: 5.4 × 16.5 × 0.85 cm
    • Rails split in the middle

    Best for: A beginner prototyping small circuits who may join boards together later.

    ≈ 5 €
    Check price on Amazon
  • Three rainbow jumper wire ribbons, one long and two short, with pin and socket ends

    GERUI Jumper wires 120 pieces, M-F, M-M and F-F, 10 and 20 cm, 28 AWG

    Three 40-wire ribbons of jumper wires from GERUI — male to female, male to male and female to female — in 10 and 20 cm lengths, 28 AWG with PVC insulation and 2.54 mm pitch ends, separable into single wires.

    Tie points
    Absent from the listing — wires only
    Power rails
    Absent from the listing
    Contact quality
    Small pins and sockets for 2.54 mm pitch, holding firmly, third and fifth bullets
    Backing
    Absent from the listing
    Wire types and lengths
    40 male-female, 40 male-male and 40 female-female; 10 cm and 20 cm, first and second bullets
    Gauge
    28 AWG, title
    Pack contents
    3 ribbons of 40 wires, 120 in all, title and second bullet
    Amazon reference
    B0DGBYR2YL (same reference on 6 Amazon marketplaces)
    EAN
    0744243857648
    • All three end types
    • Two lengths: 10 and 20 cm
    • “Male to Female” in the title, three types in the box

    Best for: A maker wiring modules to a board or single-board computer GPIO header.

    ≈ 6 €
    Check price on Amazon
  • Three equal-length rainbow jumper ribbons: socket to socket, socket to pin and pin to pin

    ELEGOO Jumper wires 3 × 40, 20 cm, M-M, F-M and F-F

    Three 40-wire ribbons of 20 cm jumper wires from ELEGOO — female to female, male to female and male to male — in many colours for following a circuit, separable into single wires.

    Tie points
    Absent from the listing — wires only
    Power rails
    Absent from the listing
    Contact quality
    Absent from the listing
    Backing
    Absent from the listing
    Wire types and lengths
    40 female-female, 40 male-female, 40 male-male; 20 cm, third and fourth bullets
    Gauge
    Absent from the listing
    Pack contents
    3 ribbons of 40 wires, fourth bullet
    Amazon reference
    B01EV70C78 (same reference on 3 Amazon marketplaces)
    EAN
    0719377200424
    • All three end types
    • Many colours for tracing a circuit
    • One length only: 20 cm

    Best for: A breadboard user who wants one length of each wire type from the same maker as their board.

    ≈ $7 / £6 / 7 €
    Check price on Amazon

All ASA and ABS filament