Skip to content

Two surfaces, two heat limits

UniTak3D Double-sided PEI plate 235 × 235 mm, smooth and textured

A double-sided 235 × 235 mm spring steel plate from UniTak3D with textured PEI rated to 300 °C on one side and smooth PEI rated to 200 °C on the other, for Creality printers from the Ender 3 to the K1C.

UniTak3D PEI plate, black textured face marked PEI Texture and smooth face marked PEI Smooth

UniTak3D Double-sided PEI plate 235 × 235 mm, smooth and textured

A double-sided 235 × 235 mm spring steel plate from UniTak3D with textured PEI rated to 300 °C on one side and smooth PEI rated to 200 °C on the other, for Creality printers from the Ender 3 to the K1C.

Size and fit
235 × 235 mm with a 220 × 220 mm maximum print area; Creality K1C, K1, Ender 3 V3, V3 SE, V3 KE, CR-10 SE, Ender 3 series, CR 20 and Ender 5 among the printers named, fourth and sixth bullets
Substrate
Spring steel sheet, second bullet
Surface type
Double-sided: textured black PEI and smooth PEI, real PEI powder coating, title and first three bullets
Magnetic base
Absent from the listing
Filament suitability
PLA, ABS, ASA, PETG, TPU, nylon, PA and PC; glue stick advised on the smooth side for everything except PLA, third and fifth bullets
Heat limit
Textured side to 300 °C, smooth side to 200 °C, third bullet
Amazon reference
B08L39BFVJ (same reference on 6 Amazon marketplaces)
EAN
0605175679800
  • Separate heat limits for each side: 300 °C textured, 200 °C smooth
  • A long list of Creality printers, including the K1C reviewed on this site
  • No magnetic base mentioned anywhere in the listing

Best for: A Creality K1C or Ender 3 owner who wants textured PEI for grip and smooth PEI for smooth first layers.

≈ £17 / 14 €
Check price on Amazon

Specifications

Size and fit
235 × 235 mm with a 220 × 220 mm maximum print area; Creality K1C, K1, Ender 3 V3, V3 SE, V3 KE, CR-10 SE, Ender 3 series, CR 20 and Ender 5 among the printers named, fourth and sixth bullets
Substrate
Spring steel sheet, second bullet
Surface type
Double-sided: textured black PEI and smooth PEI, real PEI powder coating, title and first three bullets
Magnetic base
Absent from the listing
Filament suitability
PLA, ABS, ASA, PETG, TPU, nylon, PA and PC; glue stick advised on the smooth side for everything except PLA, third and fifth bullets
Heat limit
Textured side to 300 °C, smooth side to 200 °C, third bullet
Amazon reference
B08L39BFVJ (same reference on 6 Amazon marketplaces)
EAN
0605175679800

The UniTak3D PEI plate listing, bullet by bullet

Six bullets: a black textured PEI coating said to grip harder than gold PEI, with no glue needed; a smooth PEI side that leaves the underside of a model very smooth and releases it without bending the spring steel; real PEI powder coating, textured to 300 °C and smooth to 200 °C, for PLA through PC; a 235 × 235 mm plate for Creality printers including the K1C and the Ender 3 V3 series; a reminder that the smooth side needs glue stick except for PLA and carries a protective film; and a 220 × 220 mm maximum print area on the 235 mm plate.

Two heat limits on the UniTak3D plate

300 °C and 200 °C. A double-sided plate is two surfaces with two sets of rules, and UniTak3D gives both. The smooth side is the one with the lower ceiling and the one that asks for glue stick.

The UniTak3D plate and the K1C

The K1C reviewed on this site is on the compatibility list. The listing says nothing about a magnetic base, so whether one comes in the box is not stated.

Availability

At the last look-up, the German, French, Italian and Spanish Amazon stores were asking 14 € to 20 €.

It is sold in the British Amazon store as well, in its own currency, which the euro figures above leave out on purpose.

The American Amazon catalogue lists the product, yet no seller was offering it.

Every figure here is Keepa’s reading on the date this page was last updated. Stock and prices can change at any time.

Prices quoted in this text were read on 15 September 2026. The live price is at the top of the page.

What this fits

More build plates

  • YOOPAI green plate printed PLA/PETG and Cool Plate Ultra Tack along its front edge

    YOOPAI Cold plate 257 × 257 mm for Bambu Lab 3D printers, with identification code

    A green 257 × 257 mm cold-print plate for Bambu Lab 3D printers that grips PLA at 45–55 °C and PETG at 50–70 °C, with an identification code for the X1C and X1E, a scraper, and a warning against ABS and TPU.

    Size and fit
    257 × 257 mm for Bambu Lab A1, P2S, X2D, P1P, P1S, X1C and X1E, title and fourth bullet
    Substrate
    Flexible steel plate, third bullet
    Surface type
    Textured cold-print surface, green, title and third bullet; identification code for automatic bed levelling on X1C and X1E, fourth bullet
    Magnetic base
    Absent from the listing
    Filament suitability
    PLA at 45–55 °C and PETG at 50–70 °C; not recommended for ABS or TPU, second bullet
    Heat limit
    Absent from the listing
    Amazon reference
    B0FNMPXGFP (same reference on 6 Amazon marketplaces)
    EAN
    0850078714053
    • Bed temperatures given per material: PLA 45–55 °C, PETG 50–70 °C
    • An identification code for X1C and X1E automatic bed levelling
    • Not recommended for ABS or TPU

    Best for: A Bambu Lab 3D printer owner printing large PLA and PETG parts who wants lower bed temperatures and less warping.

    ≈ $18 / £18 / 15 €
    Check price on Amazon
  • Creality gold textured PEI plate standing in front of its black Creality box

    Creality Official K2 Pro textured PEI plate, 310 × 325 mm, without magnetic base

    Creality’s official 310 × 325 mm build plate for the K2 Pro, spring steel with matte PEI powder coating on both sides, suitable for materials from PLA to PA-CF, supplied without its magnetic base.

    Size and fit
    310 × 325 mm for the Creality K2 Pro, title and first bullet
    Substrate
    Spring steel, title and first and fifth bullets
    Surface type
    Textured PEI, matte PEI powder coating on both sides, title and second bullet
    Magnetic base
    Not included: spring steel plate only, title and first bullet
    Filament suitability
    PLA, ABS, ASA, PETG, TPU, PC, PA, PLA-CF, PA-CF and PET-CF, fourth bullet
    Heat limit
    Absent from the listing — the coating is described as heat- and wear-resistant
    Amazon reference
    B0FM8GFFSX (same reference on 6 Amazon marketplaces)
    EAN
    0198549081441
    • An official Creality part for the K2 Pro
    • PEI on both sides
    • No magnetic base in the box

    Best for: A K2 Pro owner replacing a plate, or adding a second one, from the printer’s own maker.

    ≈ £19 / 28 €
    Check price on Amazon
  • MXMONK round gold textured PEI plate in front of a round black sheet

    MXMONK Round textured PEI plate 220 mm for FLSUN Q5, with magnetic base

    A round 220 mm spring steel plate from MXMONK with textured PEI powder coating on both sides, made only for the FLSUN Q5 delta printer and supplied with a self-adhesive magnetic sheet.

    Size and fit
    220 mm diameter, round, exclusively for the FLSUN Q5, first bullet; the title gives 220 × 220 mm, and the product photograph shows a round plate
    Substrate
    Spring steel, title and first and fifth bullets
    Surface type
    Textured PEI powder coating on both sides, matte finish, fifth bullet
    Magnetic base
    Strong self-adhesive magnetic sheet (B side) included, sixth bullet
    Filament suitability
    Absent from the listing
    Heat limit
    Absent from the listing — “extreme heat resistance” without a figure, third bullet
    Amazon reference
    B0FWD37X59 (same reference on 5 Amazon marketplaces)
    EAN
    0381504927452
    • The only plate of the five that lists a magnetic sheet in the box
    • Made for a round delta bed, the FLSUN Q5
    • Only for the FLSUN Q5

    Best for: A FLSUN Q5 owner who wants a removable magnetic PEI surface on the original heated bed.

    ≈ $30 / 35 €
    Check price on Amazon

Elsewhere on the workbench

  • Five 2-flute spiral cutters with an iridescent rainbow coating and plain silver shanks

    HOZLY Carbide compression end mills, 2 flutes, 4 mm shank, 4 mm × 22 mm, DLC, 5 pieces

    Five 2-flute solid carbide compression end mills from HOZLY with an up-cut and down-cut spiral and DLC coating, a 4 mm shank, 4 mm cutting diameter and 22 mm cutting length, for burr-free edges in wood on CNC routers.

    Shank diameter
    4 mm, title
    Cutting diameter and length
    4 mm diameter, 22 mm cutting edge length, title
    Flute count
    2 flutes, title
    Helix direction
    Up-down compression spiral, title and first and third bullets
    End shape
    Absent from the listing
    Coating
    DLC coating on spiral carbide, title
    Material suitability
    Wood, on CNC routers, woodworking machines and advertising routers, title and fifth bullet
    Amazon reference
    B0B5KY43S8 (same reference on 6 Amazon marketplaces)
    EAN
    0631384621378
    • Shank, diameter and cutting length all given
    • Compression spiral for clean top and bottom edges
    • A 4 mm shank does not fit a 1/8 in collet

    Best for: A CNC router owner with a 4 mm collet cutting plywood parts where both faces show.

    ≈ $42 / £36 / 40 €
    Check price on Amazon
  • Ten bright steel 4-flute end mills from 1.5 to 6 mm, shanks stamped SWT with sizes and HSS

    Linkstyle HSS 4-flute end mill set, 10 pieces, 1.5–6 mm

    Ten 4-flute end mills from Linkstyle with straight shanks, in ten sizes from 1.5 to 6 mm, in high-speed steel according to the bullets though the title also says carbide, for wood, plastics, aluminium, copper and steels.

    Shank diameter
    Absent from the listing text — straight shank, title and fifth bullet; the shanks in the product photograph are stamped with a 6 mm shank size, as in 4×6×11×55
    Cutting diameter and length
    1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5 and 6 mm, second bullet; no lengths
    Flute count
    4 flutes, title
    Helix direction
    Absent from the listing
    End shape
    Absent from the listing
    Coating
    Absent from the listing — high-speed steel in the third bullet; “HSS” and “Hartmetall” (carbide) both in the title
    Material suitability
    Wood, soft metal, steels, cast iron, titanium, aluminium, plastics, acrylic, PVC and hardwood, first and fifth bullets
    Amazon reference
    B07PJZ4144 (same reference on 5 Amazon marketplaces)
    EAN
    0738944025864
    • Ten sizes in 0.5 mm steps from 1.5 to 6 mm
    • A larger core stated for rigidity
    • HSS and carbide both in the title

    Best for: A desktop CNC owner who wants a range of small straight-shank cutters to try on plastics and wood.

    ≈ £13 / 13 €
    Check price on Amazon
  • Transparent extruder labelled Dual Drive Extruder, two gears visible inside, with tension screw, spring and two hex keys

    3Dman Transparent dual drive Bowden extruder, 3:1 gearing

    A transparent dual drive Bowden extruder from 3DMAN with 3:1 double-gear reduction, gears gripping the filament from both sides and a spring device to set their pressure, for Ender, CR-10, Mega S and Prusa i3 3D printers.

    Printer fit
    Ender 3 V2, Ender 3 Pro, Ender 3 series, Ender 5 Pro, Ender 5 Plus, CR-10 series, Anycubic Mega S, Tevo Tornado, Wanhao D9, Anet A8 E10, Prusa i3 and DIY 3D printers, fourth bullet
    Direct drive or Bowden
    Bowden, title and second bullet
    Gear ratio
    3:1 double-gear reduction, third bullet
    Drive gears
    Dual drive gears gripping the filament from each side, with a spring device to fine-tune their pressure, second and fifth bullets
    Filament path
    Absent from the listing — the transparent body shows how it works, first bullet
    Weight
    Absent from the listing
    Firmware figure
    Absent from the listing
    Amazon reference
    B09NM1JL22 (same reference on 5 Amazon marketplaces)
    EAN
    0755738197422
    • A transparent body that shows the gears working
    • Gear ratio stated: 3:1
    • No E-steps value

    Best for: An Ender 3 or CR-10 owner fitting a geared Bowden extruder who wants to see the filament feeding.

    ≈ £11 / 16 €
    Check price on Amazon

All build plates