Skip to content

Brand

GEEETECH

Four filaments, uneven on the details

GEEETECH on the filament shelves

A black PLA with a 190–220 °C range, a gold silk PLA of about 330 m, a white ASA+ with a ±0.03 mm tolerance, and a TPU 95A with instructions to re-dry it for more than 8 hours at 65 °C.

GEEETECH’s best and thinnest pages

The TPU page tells the buyer how to dry the spool again; the silk PLA gives a length. The ASA+ page is one bullet long and says nothing about UV resistance, the reason ASA is usually chosen.

GEEETECH’s figures to check

The PLA is 1 kg in the title and 1.1 kg in the bullets. Temperatures appear on the PLA only; the silk PLA, ASA+ and TPU leave them out.

GEEETECH parts and supplies, each one on the bench

  • GEEETECH white ASA filament spool

    GEEETECH ASA+ 1.75 mm ±0.03 mm, white, 1 kg

    A 1 kg spool of white GEEETECH ASA+ in 1.75 mm ±0.03 mm in vacuum packaging, described as heat-resistant and durable in the title, with a single bullet and no print settings.

    Diameter tolerance
    ±0.03 mm, only bullet
    Net weight
    1 kg, title and only bullet
    Recommended temperatures
    Absent from the listing
    Warping guidance
    Absent from the listing
    UV resistance
    Absent from the listing — heat resistance and durability are named in the title
    Fume guidance
    Absent from the listing
    Spool size
    Absent from the listing
    Amazon reference
    B0FGJ5FMBC (same reference on 4 Amazon marketplaces)
    EAN
    6974994176536
    • A published tolerance, ±0.03 mm
    • Vacuum packaging
    • A single bullet: no temperatures, warping or fume guidance

    Best for: A buyer who already knows how to print ASA and only needs the diameter and weight.

    ≈ 17 €
    Check price on Amazon
  • GEEETECH black PLA filament spool beside a black printed figure

    GEEETECH PLA 1.75 mm, black, 1 kg spool

    A spool of black GEEETECH PLA in 1.75 mm with a ±0.02 mm tolerance and a printing range of 190–220 °C, vacuum-packed, whose weight is given as 1 kg in the title and 1.1 kg in the first bullet.

    Diameter and tolerance
    1.75 mm ±0.02 mm, first and fourth bullets
    Net weight
    1 kg in the title; 1.1 kg spool in the first bullet
    Spool size
    Absent from the listing
    Recommended temperatures
    Printing temperature 190–220 °C, third bullet; no bed temperature
    Finish
    Absent from the listing — black, title
    Winding
    Absent from the listing
    Packaging
    Vacuum packaging, first bullet
    Amazon reference
    B071DM81ZK (same reference on 5 Amazon marketplaces)
    EAN
    0718399619665
    • A published printing temperature range, 190–220 °C
    • Vacuum packaging and a ±0.02 mm tolerance
    • Weight given as 1 kg in the title and 1.1 kg in the bullets

    Best for: A PLA user who wants a stated temperature range to start tuning from.

    ≈ 12 €
    Check price on Amazon
  • GEEETECH silk gold PLA filament spool

    GEEETECH Silk PLA 1.75 mm ±0.03 mm, gold, 1 kg, about 330 m

    A 1 kg spool of gold silk PLA from GEEETECH in 1.75 mm ±0.03 mm, about 330 metres long, with a smooth silky finish that the listing says hides layer lines, vacuum-packed with desiccant.

    Base polymer
    PLA, title
    Filler
    Absent from the listing — a silk finish is described, not a filler
    Nozzle requirement
    Absent from the listing
    Recommended temperatures
    Absent from the listing
    Drying advice
    Absent from the listing as advice — vacuum-packed with desiccant, third bullet
    Net weight
    1 kg, about 330 m of filament, fourth bullet
    Finish
    Silk: very smooth, hiding lines and imperfections, gold, first bullet and title
    Amazon reference
    B07R4M6FMQ (same reference on 6 Amazon marketplaces)
    EAN
    6974994170589
    • A published length, about 330 m on the spool
    • A silk finish that hides layer lines, for vases and decorative prints
    • No temperatures

    Best for: Vases, figures and gifts where a shiny gold surface matters more than strength.

    ≈ £14 / 16 €
    Check price on Amazon
  • GEEETECH black TPU 95A filament spool

    GEEETECH TPU 95A 1.75 mm, black, 1 kg, with drying guidance

    A 1 kg spool of black GEEETECH TPU 95A in 1.75 mm, dried for 24 hours and vacuum-sealed in a resealable foil bag, whose listing advises storage with silica gel or drying for more than 8 hours at 65 °C.

    Shore hardness
    95A, title and first two bullets
    Diameter tolerance
    Absent from the listing text — the spool label in the photograph reads ±0.03 mm
    Net weight
    1 kg, title
    Recommended speed and temperatures
    Absent from the listing as print settings — drying at 65 °C for more than 8 hours is advised, fourth bullet
    Extruder guidance
    Absent from the listing
    Packaging
    Dried for 24 hours, vacuum-sealed in resealable foil bags, fourth bullet
    Amazon reference
    B0DPKBHKX9 (same reference on 4 Amazon marketplaces)
    EAN
    6974994174716
    • Dried for 24 hours before sealing, in a resealable foil bag
    • Drying guidance for later: more than 8 hours at 65 °C, or storage with silica gel
    • No print temperatures or speed

    Best for: A maker who prints TPU occasionally and needs to keep an opened spool usable.

    ≈ 18 €
    Check price on Amazon

A price quoted in the text of a MakerVerdict page dates from the day that page was written; the live figure beside each product is fetched while you read and replaces it.