Skip to content

A length on the spool, and a shine on the print

GEEETECH Silk PLA 1.75 mm ±0.03 mm, gold, 1 kg, about 330 m

A 1 kg spool of gold silk PLA from GEEETECH in 1.75 mm ±0.03 mm, about 330 metres long, with a smooth silky finish that the listing says hides layer lines, vacuum-packed with desiccant.

GEEETECH silk gold PLA filament spool

GEEETECH Silk PLA 1.75 mm ±0.03 mm, gold, 1 kg, about 330 m

A 1 kg spool of gold silk PLA from GEEETECH in 1.75 mm ±0.03 mm, about 330 metres long, with a smooth silky finish that the listing says hides layer lines, vacuum-packed with desiccant.

Base polymer
PLA, title
Filler
Absent from the listing — a silk finish is described, not a filler
Nozzle requirement
Absent from the listing
Recommended temperatures
Absent from the listing
Drying advice
Absent from the listing as advice — vacuum-packed with desiccant, third bullet
Net weight
1 kg, about 330 m of filament, fourth bullet
Finish
Silk: very smooth, hiding lines and imperfections, gold, first bullet and title
Amazon reference
B07R4M6FMQ (same reference on 6 Amazon marketplaces)
EAN
6974994170589
  • A published length, about 330 m on the spool
  • A silk finish that hides layer lines, for vases and decorative prints
  • No temperatures

Best for: Vases, figures and gifts where a shiny gold surface matters more than strength.

≈ £14 / 16 €
Check price on Amazon

Specifications

Base polymer
PLA, title
Filler
Absent from the listing — a silk finish is described, not a filler
Nozzle requirement
Absent from the listing
Recommended temperatures
Absent from the listing
Drying advice
Absent from the listing as advice — vacuum-packed with desiccant, third bullet
Net weight
1 kg, about 330 m of filament, fourth bullet
Finish
Silk: very smooth, hiding lines and imperfections, gold, first bullet and title
Amazon reference
B07R4M6FMQ (same reference on 6 Amazon marketplaces)
EAN
6974994170589

The GEEETECH silk PLA listing, bullet by bullet

Five bullets: a silky texture that looks smooth and hides lines and imperfections, for crafts and vases; starch-based raw materials; vacuum packaging with desiccant; a ±0.03 mm tolerance and about 330 m on a full 1 kg spool; and good bed adhesion without warping.

Silk as a finish, not a filler

Silk PLA is shiny PLA. The listing describes a surface effect and names no filler, so nothing on the page points to extra nozzle wear.

A length, stated

About 330 metres is a useful figure: slicers estimate prints in metres as often as grams, and the listing gives both.

Availability

At the last look-up, the German, French and Spanish Amazon stores were asking 16 € to 21 €.

It is sold in the American and British Amazon stores as well, in their own currency, which the euro figures above leave out on purpose.

The asking price on the Italian Amazon store ran past 1.6× the lowest country’s. A gap that size points to goods shipped in from abroad rather than a local seller, so that offer is left out of the figures above.

Every figure here is Keepa’s reading on the date this page was last updated. Stock and prices can change at any time.

Prices quoted in this text were read on 15 September 2026. The live price is at the top of the page.

More speciality filaments

  • Creality wood-texture PLA filament spool

    Creality Wood-texture PLA 1.75 mm ±0.02 mm, 1 kg

    A 1 kg spool of Creality PLA with a natural wood look and feel in 1.75 mm ±0.02 mm, printed at 190–230 °C and 40–90 mm/s, whose finish is called matte in the title and silky in the first bullet.

    Base polymer
    PLA, title and fourth bullet
    Filler
    Absent from the listing — a natural wood look and feel is described, without naming wood particles, first bullet
    Nozzle requirement
    Absent from the listing
    Recommended temperatures
    190–230 °C at 40–90 mm/s, third bullet
    Drying advice
    Absent from the listing
    Net weight
    1 kg, title
    Finish
    Matte in the title; smooth and silky in the first bullet
    Amazon reference
    B0BZCW8L7J (same reference on 6 Amazon marketplaces)
    EAN
    0198549100852
    • A published temperature and speed range
    • A ±0.02 mm tolerance
    • The finish is called matte in the title and silky in the bullet

    Best for: Decorative models and product mock-ups that should look like wood.

    ≈ £23 / 19 €
    Check price on Amazon
  • ERYONE PETG carbon fibre black filament spool

    ERYONE PETG carbon fibre 1.75 mm, black, 1 kg

    A 1 kg spool of black ERYONE PETG with carbon fibre, printed at 240–260 °C on a 100 °C bed, dried for 24 hours before vacuum packing and advised to be kept in resealable foil once opened.

    Base polymer
    PETG, title and first bullet
    Filler
    Carbon fibre, first bullet
    Nozzle requirement
    Absent from the listing
    Recommended temperatures
    Nozzle 240–260 °C, bed 100 °C, third bullet; the spool label in the product photograph reads 230–250 °C nozzle and 75–85 °C bed
    Drying advice
    Dried 24 hours before vacuum packing; store in resealable foil bags after opening, fifth bullet
    Net weight
    1 kg, title and second bullet
    Finish
    Absent from the listing
    Amazon reference
    B0D6G98F3K (same reference on 6 Amazon marketplaces)
    EAN
    0810168132280
    • Nozzle and bed temperatures published
    • Drying before packing and storage advice after opening
    • Two tolerances: ±0.03 mm in the title, ±0.02 mm in the bullet

    Best for: Stiff functional parts in PETG on a printer already fitted with a suitable nozzle.

    ≈ $25 / £21 / 23 €
    Check price on Amazon
  • eSUN ePLA-CF carbon fibre filled black filament spool

    eSUN PLA-CF carbon fibre filled 1.75 mm, black, 1 kg

    A 1 kg spool of black eSUN ePLA-CF: PLA with chopped carbon fibre for higher strength and flexural modulus and a matte finish, named as compatible with fast printers including the AnkerMake M5, with no nozzle guidance.

    Base polymer
    PLA, first bullet
    Filler
    Chopped carbon fibre, organically infiltrated, first bullet
    Nozzle requirement
    Absent from the listing
    Recommended temperatures
    Absent from the listing
    Drying advice
    Absent from the listing — lower water absorption than eSUN ePA-CF is stated, fourth bullet
    Net weight
    1 kg, title
    Finish
    Matte carbon fibre texture with less visible layering, second bullet
    Amazon reference
    B0CH36F58Y (same reference on 6 Amazon marketplaces)
    EAN
    0840249104332
    • Carbon fibre filler for higher strength and flexural modulus, as stated
    • A matte finish that makes layer lines less visible
    • No mention of whether a hardened nozzle is needed

    Best for: Stiff jigs, brackets and drone parts on a fast printer, once the nozzle is confirmed suitable.

    ≈ £20 / 17 €
    Check price on Amazon

Elsewhere on the workbench

  • Two pyramids of twelve white mugs, and one mug beside its open white box

    Signzworld AAA-grade white ceramic sublimation mugs 325 ml, big handle, 24 pack

    Twenty-four white ceramic sublimation mugs from Signzworld, 325 ml, AAA grade with a double sublimation coating, straight sides, a big handle and a gloss finish, each in a white protective box, for heat presses and 3D vacuum ovens.

    Coating
    Double sublimation coating, first bullet
    Size and printable area
    325 ml (11 oz), straight sides, title and second, third and fourth bullets; printable area not given
    Press fit
    Heat presses and 3D vacuum ovens, second bullet
    Recommended settings
    Absent from the listing
    Finish
    White gloss ceramic, big handle, AAA grade, first, third and fourth bullets
    Care advice
    Dishwasher-proof and microwave-safe; images described as not fading after repeated washes, fifth bullet
    Amazon reference
    B098TDYXGG (same reference on 6 Amazon marketplaces)
    EAN
    5055673477845
    • Double sublimation coating
    • Each mug in its own white box
    • No press settings

    Best for: A small sublimation shop that ships mugs and wants each one boxed.

    ≈ £38 / 50 €
    Check price on Amazon
  • White mug printed with roses and butterflies beside a patterned Subli-Print box

    Subli-Print AAA Classic white sublimation mugs 330 ml, 24 pack, with press settings

    Twenty-four Classic sublimation mugs from Subli-Print, about 330 ml, 80 mm in diameter and 95 mm high, with a polyester-polymer high-gloss coating, each in a transport box, with processing guidance of 200 °C for 480 seconds at medium pressure, mirrored, after 24 hours at room temperature.

    Coating
    Subli-Print polyester-polymer high-gloss coating, second, third and fourth bullets
    Size and printable area
    About 330 ml, Ø about 80 mm, height about 95 mm, full-surface printable, first and third bullets
    Press fit
    Absent from the listing — sublimation by heat, second bullet
    Recommended settings
    200 °C, 480 seconds, medium pressure, mirrored design; store items 24 hours at room temperature first, fifth bullet
    Finish
    High-gloss, high whiteness, second and third bullets
    Care advice
    Dishwasher use and microwave use described, first bullet; food-contact compliance under § 31 LFGB stated, second bullet
    Amazon reference
    B0FZVSB944 (same reference on 6 Amazon marketplaces)
    EAN
    4262480234337
    • Full press settings: 200 °C, 480 s, medium, mirrored
    • Diameter and height given
    • 480 seconds given with no press type named

    Best for: A mug press owner who wants the maker’s temperature and time to start from, and mugs boxed for resale.

    ≈ £77 / 56 €
    Check price on Amazon
  • Plain white ceramic mug with a round handle

    Tassendruck White ceramic sublimation mugs 300 ml, 12 pack

    Twelve white ceramic sublimation mugs from Tassendruck, 300 ml, 9.5 cm high and 8 cm in diameter, weighing 350 g, described as dishwasher-proof and microwave-safe and suitable only for sublimation printing.

    Coating
    Sublimation layer; for sublimation printing only, first and fourth bullets
    Size and printable area
    300 ml, height 9.5 cm, diameter 8 cm, second bullet; printable area not given
    Press fit
    Absent from the listing — thermal printing with sublimation ink, first bullet
    Recommended settings
    Absent from the listing — results depend on print parameters, third bullet
    Finish
    White ceramic, 350 g, first and second bullets
    Care advice
    Dishwasher-proof and microwave-safe, second bullet
    Amazon reference
    B096Y1HVBN (same reference on 1 Amazon marketplace)
    EAN
    4251739386699
    • Height, diameter, weight and volume given
    • Dishwasher-proof and microwave-safe, as the second bullet says
    • No press settings

    Best for: A mug press owner who can check an 8 cm diameter and 9.5 cm height against the press.

    ≈ 44 €
    Check price on Amazon

All speciality filaments