Skip to content

Reinforced PETG described as PLA

Flashforge PETG carbon fibre 1.75 mm ±0.02 mm, black, 1 kg

A 1 kg spool of black Flashforge PETG-CF in 1.75 mm ±0.02 mm, reinforced with carbon fibre for strength and heat resistance, dried for 24 hours and vacuum-sealed, whose later bullets describe PLA.

Flashforge PETG-CF black filament spool

Flashforge PETG carbon fibre 1.75 mm ±0.02 mm, black, 1 kg

A 1 kg spool of black Flashforge PETG-CF in 1.75 mm ±0.02 mm, reinforced with carbon fibre for strength and heat resistance, dried for 24 hours and vacuum-sealed, whose later bullets describe PLA.

Base polymer
PETG, title and first bullet
Filler
Carbon fibre reinforcement, first bullet
Nozzle requirement
Absent from the listing
Recommended temperatures
Absent from the listing
Drying advice
Absent from the listing as advice — dried 24 hours before packing, vacuum-sealed with desiccant, second bullet
Net weight
1 kg, title
Finish
Absent from the listing
Amazon reference
B0CNYX58SV (same reference on 6 Amazon marketplaces)
EAN
6937120306856
  • Carbon fibre reinforcement for strength and temperature resistance, keeping PETG’s impact resistance, as stated
  • A ±0.02 mm tolerance in the title
  • The second, third and fourth bullets describe PLA

Best for: Stiffer PETG parts for a Flashforge owner who will set temperatures from the maker’s profile.

≈ $26 / 26 €
Check price on Amazon

Specifications

Base polymer
PETG, title and first bullet
Filler
Carbon fibre reinforcement, first bullet
Nozzle requirement
Absent from the listing
Recommended temperatures
Absent from the listing
Drying advice
Absent from the listing as advice — dried 24 hours before packing, vacuum-sealed with desiccant, second bullet
Net weight
1 kg, title
Finish
Absent from the listing
Amazon reference
B0CNYX58SV (same reference on 6 Amazon marketplaces)
EAN
6937120306856

The Flashforge PETG-CF listing, bullet by bullet

Five bullets: PETG reinforced with carbon fibre for strength and temperature resistance while keeping impact resistance; clog-free manufacture, 24 hours of drying and vacuum sealing with desiccant, described as PLA; automatic winding with manual checks, described as PLA; high-detail printing without warping, described as PLA; and a two-month warranty and a 30-day money-back offer.

The same PLA text, again

The Flashforge ABS on this site repeats the same three PLA bullets. Shared text across a range saves writing and costs accuracy. For a carbon-filled PETG, the settings that would differ most from PLA are exactly what the copied text cannot supply.

Reinforced, as described

Strength and temperature resistance up, impact resistance kept: the first bullet gives the reason to choose PETG-CF over plain PETG. No figure supports it.

A nozzle for carbon fibre

As with the other carbon filaments here, nozzle wear is not discussed, and it is the first question for a buyer printing a full spool.

Availability

At the last look-up, the German, French, Italian and Spanish Amazon stores were asking roughly 26 €.

It is sold in the American Amazon store as well, in its own currency, which the euro figures above leave out on purpose.

The British Amazon catalogue lists the product, yet no seller was offering it.

Every figure here is Keepa’s reading on the date this page was last updated. Stock and prices can change at any time.

Prices quoted in this text were read on 15 September 2026. The live price is at the top of the page.

More speciality filaments

  • GEEETECH silk gold PLA filament spool

    GEEETECH Silk PLA 1.75 mm ±0.03 mm, gold, 1 kg, about 330 m

    A 1 kg spool of gold silk PLA from GEEETECH in 1.75 mm ±0.03 mm, about 330 metres long, with a smooth silky finish that the listing says hides layer lines, vacuum-packed with desiccant.

    Base polymer
    PLA, title
    Filler
    Absent from the listing — a silk finish is described, not a filler
    Nozzle requirement
    Absent from the listing
    Recommended temperatures
    Absent from the listing
    Drying advice
    Absent from the listing as advice — vacuum-packed with desiccant, third bullet
    Net weight
    1 kg, about 330 m of filament, fourth bullet
    Finish
    Silk: very smooth, hiding lines and imperfections, gold, first bullet and title
    Amazon reference
    B07R4M6FMQ (same reference on 6 Amazon marketplaces)
    EAN
    6974994170589
    • A published length, about 330 m on the spool
    • A silk finish that hides layer lines, for vases and decorative prints
    • No temperatures

    Best for: Vases, figures and gifts where a shiny gold surface matters more than strength.

    ≈ £14 / 16 €
    Check price on Amazon
  • Creality wood-texture PLA filament spool

    Creality Wood-texture PLA 1.75 mm ±0.02 mm, 1 kg

    A 1 kg spool of Creality PLA with a natural wood look and feel in 1.75 mm ±0.02 mm, printed at 190–230 °C and 40–90 mm/s, whose finish is called matte in the title and silky in the first bullet.

    Base polymer
    PLA, title and fourth bullet
    Filler
    Absent from the listing — a natural wood look and feel is described, without naming wood particles, first bullet
    Nozzle requirement
    Absent from the listing
    Recommended temperatures
    190–230 °C at 40–90 mm/s, third bullet
    Drying advice
    Absent from the listing
    Net weight
    1 kg, title
    Finish
    Matte in the title; smooth and silky in the first bullet
    Amazon reference
    B0BZCW8L7J (same reference on 6 Amazon marketplaces)
    EAN
    0198549100852
    • A published temperature and speed range
    • A ±0.02 mm tolerance
    • The finish is called matte in the title and silky in the bullet

    Best for: Decorative models and product mock-ups that should look like wood.

    ≈ £23 / 19 €
    Check price on Amazon
  • ERYONE PETG carbon fibre black filament spool

    ERYONE PETG carbon fibre 1.75 mm, black, 1 kg

    A 1 kg spool of black ERYONE PETG with carbon fibre, printed at 240–260 °C on a 100 °C bed, dried for 24 hours before vacuum packing and advised to be kept in resealable foil once opened.

    Base polymer
    PETG, title and first bullet
    Filler
    Carbon fibre, first bullet
    Nozzle requirement
    Absent from the listing
    Recommended temperatures
    Nozzle 240–260 °C, bed 100 °C, third bullet; the spool label in the product photograph reads 230–250 °C nozzle and 75–85 °C bed
    Drying advice
    Dried 24 hours before vacuum packing; store in resealable foil bags after opening, fifth bullet
    Net weight
    1 kg, title and second bullet
    Finish
    Absent from the listing
    Amazon reference
    B0D6G98F3K (same reference on 6 Amazon marketplaces)
    EAN
    0810168132280
    • Nozzle and bed temperatures published
    • Drying before packing and storage advice after opening
    • Two tolerances: ±0.03 mm in the title, ±0.02 mm in the bullet

    Best for: Stiff functional parts in PETG on a printer already fitted with a suitable nozzle.

    ≈ $25 / £21 / 23 €
    Check price on Amazon

Elsewhere on the workbench

  • White ceramic mug beside a plain white box

    PixMax AAA white ceramic sublimation mugs 325 ml (11 oz), 36 pack, gift boxes

    Thirty-six white ceramic sublimation mugs from PixMax, AAA grade, 325 ml (11 oz) with a polymer coating, a large handle and a gloss finish, each in a protective presentation box, dishwasher-proof and microwave-safe, for heat transfer presses.

    Coating
    Polymer coating, title
    Size and printable area
    325 ml (11 oz), title and second bullet; printable area not given
    Press fit
    Heat transfer presses, fifth bullet
    Recommended settings
    Absent from the listing
    Finish
    White gloss ceramic, AAA grade, large handle, first and second bullets
    Care advice
    Microwave-safe and dishwasher-proof, third bullet
    Amazon reference
    B01705OTCM (same reference on 6 Amazon marketplaces)
    EAN
    5055986100836
    • Thirty-six mugs, each in a presentation box
    • Polymer coating named
    • No press settings

    Best for: A sublimation business pressing mugs in volume that needs boxes for each.

    ≈ £65 / 62 €
    Check price on Amazon
  • Four white straight tumblers with clear lids and steel straws, and four straw brushes

    Roundsky 20 oz straight skinny stainless steel sublimation tumblers, 4 pack, lids and straws

    Four 20 oz stainless steel skinny tumblers from Roundsky with a sublimation coating, fully straight rather than tapered for full-wrap printing in a tumbler press or sublimation oven, double-walled and vacuum-insulated, with splash-proof lids, stainless straws and brushes.

    Coating
    High-quality sublimation coating, third bullet
    Size and printable area
    20 oz, fully straight and not tapered, title and fourth bullet
    Press fit
    Tumbler press or sublimation oven, fourth bullet
    Recommended settings
    Absent from the listing
    Finish
    Stainless steel, double-wall vacuum insulation; hot 3 hours, cold 9 hours stated, second bullet
    Care advice
    Absent from the listing — straw brushes included, easy to clean, first and second bullets
    Amazon reference
    B0C7TB51DQ (same reference on 5 Amazon marketplaces)
    EAN
    4894923729720
    • Fully straight walls for a full wrap
    • Lids, stainless straws and straw brushes included
    • No press temperature or time

    Best for: A tumbler press or sublimation oven owner making full-wrap drinkware.

    ≈ £32 / 25 €
    Check price on Amazon
  • Two pyramids of twelve white mugs, and one mug beside its open white box

    Signzworld AAA-grade white ceramic sublimation mugs 325 ml, big handle, 24 pack

    Twenty-four white ceramic sublimation mugs from Signzworld, 325 ml, AAA grade with a double sublimation coating, straight sides, a big handle and a gloss finish, each in a white protective box, for heat presses and 3D vacuum ovens.

    Coating
    Double sublimation coating, first bullet
    Size and printable area
    325 ml (11 oz), straight sides, title and second, third and fourth bullets; printable area not given
    Press fit
    Heat presses and 3D vacuum ovens, second bullet
    Recommended settings
    Absent from the listing
    Finish
    White gloss ceramic, big handle, AAA grade, first, third and fourth bullets
    Care advice
    Dishwasher-proof and microwave-safe; images described as not fading after repeated washes, fifth bullet
    Amazon reference
    B098TDYXGG (same reference on 6 Amazon marketplaces)
    EAN
    5055673477845
    • Double sublimation coating
    • Each mug in its own white box
    • No press settings

    Best for: A small sublimation shop that ships mugs and wants each one boxed.

    ≈ £38 / 50 €
    Check price on Amazon

All speciality filaments