Skip to content

A tent with a vent, sized for resin printers

VEVOR Printer tent 55 × 65 × 75 cm with ventilation and LED

A 550 × 650 × 750 mm printer tent with a ventilation system that clears smoke and dust after printing, a transparent window, LED lighting and flame-retardant materials, sized for small FDM and resin printers.

VEVOR 3D printer tent with a clear window and vent

VEVOR Printer tent 55 × 65 × 75 cm with ventilation and LED

A 550 × 650 × 750 mm printer tent with a ventilation system that clears smoke and dust after printing, a transparent window, LED lighting and flame-retardant materials, sized for small FDM and resin printers.

Inner dimensions
550 × 650 × 750 mm, title and second bullet; not stated as inner or outer
Materials
Flame-retardant materials and a stable construction, fourth bullet; described as dustproof and waterproof in the title
Ventilation and filtration
A ventilation system that removes smoke and dust after printing, third bullet; no filter described
Doors
Absent from the listing — a large transparent window is described, fifth bullet
Cable ports
Absent from the listing
Published fire rating
Absent from the listing — “flame-retardant materials” without a classification
Amazon reference
B0FYWNGS7M (same reference on 6 Amazon marketplaces)
EAN
0197988168577
  • A ventilation system for smoke and dust, which most covers here lack
  • Room for small FDM printers and most LCD resin printers
  • Ventilation without a described filter

Best for: A small resin printer in a room where fumes need to be moved out rather than contained.

≈ $42 / 48 €
Check price on Amazon

Specifications

Inner dimensions
550 × 650 × 750 mm, title and second bullet; not stated as inner or outer
Materials
Flame-retardant materials and a stable construction, fourth bullet; described as dustproof and waterproof in the title
Ventilation and filtration
A ventilation system that removes smoke and dust after printing, third bullet; no filter described
Doors
Absent from the listing — a large transparent window is described, fifth bullet
Cable ports
Absent from the listing
Published fire rating
Absent from the listing — “flame-retardant materials” without a classification
Amazon reference
B0FYWNGS7M (same reference on 6 Amazon marketplaces)
EAN
0197988168577

The VEVOR printer tent listing, bullet by bullet

Five bullets: a constant temperature for adhesion and fewer warps; a size of 550 × 650 × 750 mm for small printers and most LCD resin printers such as the Photon Mono and Mars 3, with advice to measure first; a ventilation system removing smoke and dust after printing; flame-retardant materials and a closed design against dust and accidental contact; and a transparent window with LED lighting.

A vent on the VEVOR tent

Air out, not just in. A ventilation system moves smoke and fumes out of the tent, which matters most for resin printing. The listing does not describe a filter, so where the air goes is the next question to settle.

Measure first

The second bullet asks for the printer to be measured before ordering. 550 × 650 × 750 mm is generous for a small resin printer and tight for a larger FDM machine.

Flame retardant, as a word

The fourth bullet describes flame-retardant materials. No rating accompanies it, and the page reports the phrase as the maker’s.

Availability

At the last look-up, the German, French, Italian and Spanish Amazon stores were asking 48 € to 50 €.

It is sold in the American Amazon store as well, in its own currency, which the euro figures above leave out on purpose.

The British Amazon catalogue lists the product, yet no seller was offering it.

Every figure here is Keepa’s reading on the date this page was last updated. Stock and prices can change at any time.

Prices quoted in this text were read on 15 September 2026. The live price is at the top of the page.

More 3D printer enclosures

  • TOPCUBE tent enclosure with a window and hygrometer around a compact 3D printer

    TOPCUBE TOPCUBE enclosure for Bambu Lab A1 mini, 460 × 460 × 550 mm

    A 460 × 460 × 550 mm enclosure made for the Bambu Lab A1 mini, with a large window and LED strips, whose listing states the inside stays below 40 °C and that noise falls from 60 to 40 dB.

    Inner dimensions
    460 × 460 × 550 mm, title; not stated as inner or outer
    Materials
    Fire-resistant materials and a robust construction, fifth bullet; the materials are not named
    Ventilation and filtration
    Absent from the listing — particles are described as settling inside during printing, third bullet
    Doors
    Absent from the listing text — a large transparent viewing window is described, fourth bullet, and the photograph shows a zipped front
    Cable ports
    Absent from the listing
    Published fire rating
    Absent from the listing — “fire-resistant materials” without a classification
    Amazon reference
    B0DTKQ5K1G (same reference on 5 Amazon marketplaces)
    EAN
    0850070936491
    • Made for the Bambu Lab A1 mini, reviewed on this site
    • Integrated LED strips and a large window for watching prints
    • No ventilation or filtration; particles are said to settle inside

    Best for: An A1 mini owner who wants a quieter, dust-free printer corner with light for watching prints.

    ≈ 45 €
    Check price on Amazon
  • UniTak3D black cover over a small resin 3D printer

    UniTak3D Blackout cover for small resin printers, 25.5 × 24.5 × 39 cm

    A fabric blackout cover for small resin printers, 25.5 × 24.5 × 39 cm, that keeps dust and direct sunlight off the resin, with flaps on all four sides for reaching controls and ports.

    Inner dimensions
    25.5 × 24.5 × 39 cm, fourth bullet; not stated as inner or outer
    Materials
    Described as waterproof, dustproof and resistant to tearing and abrasion, third bullet; the material is not named
    Ventilation and filtration
    Absent from the listing
    Doors
    Flaps on all four sides for access to the printer’s controls and ports, fifth bullet
    Cable ports
    Absent from the listing as ports — the flaps give access to connections
    Published fire rating
    Absent from the listing
    Amazon reference
    B097D4L3G6 (same reference on 6 Amazon marketplaces)
    EAN
    0605175680011
    • Keeps dust and direct sunlight off a resin printer, which the second bullet ties to keeping the resin in good condition
    • Flaps on all four sides to reach controls without lifting the cover
    • A cover, not an enclosure: no ventilation, filtration or temperature control

    Best for: Covering a small resin printer between prints in a room with daylight.

    ≈ 7 €
    Check price on Amazon
  • Creality large 3D printer enclosure with clear window and LED strip

    Creality Large enclosure 700 × 750 × 900 mm with vents, fan ports and LED

    A large Creality enclosure with 700 × 750 × 900 mm inner dimensions, ventilation openings, fan ports and cable exits on both sides, a transparent window, a USB LED strip and a side tool pocket.

    Inner dimensions
    700 × 750 × 900 mm, stated as inner dimensions, first bullet
    Materials
    Described as fireproof in the title; the materials are not named
    Ventilation and filtration
    Ventilation openings and fan ports, fifth bullet; no filter described
    Doors
    Absent from the listing — a large transparent window is described, fourth bullet
    Cable ports
    Cable exits placed symmetrically left and right, fifth bullet
    Published fire rating
    Absent from the listing — “fireproof” without a classification
    Amazon reference
    B0GCKCGV8P (same reference on 6 Amazon marketplaces)
    EAN
    0198549097992
    • Inner dimensions stated as such: 700 × 750 × 900 mm
    • Ventilation openings, fan ports and cable exits on both sides
    • “Fireproof” claimed without a rating

    Best for: A large bed-slinger such as a CR-10 or Ender 5 Plus that needs room, cable routing and a fan outlet.

    ≈ £60 / 66 €
    Check price on Amazon

Elsewhere on the workbench

  • Orange ruthex deburrer with a gold blade, and an open metal box holding the handle, three gold and eight black blades

    ruthex Deburring tool in metal box, 11 blades, storage in the handle

    A deburring tool from ruthex in a metal box, with 11 HSS tool steel blades for right- and left-handed use and titanium-coated blades for holes, a quick-release blade holder and a compartment in the metal handle for two spare blades.

    Itemised contents
    Deburrer and 11 blades in a metal box, title and fourth bullet
    Removal and deburring tools
    Deburrer with HSS tool steel blades for right- and left-handers, for holes, long edges and hard surfaces; titanium-coated blades for holes, title and third and fifth bullets
    Nozzle needles
    Absent from the listing
    Cutters
    Absent from the listing
    Blade storage
    Compartment in the metal handle for 2 extra blades, second bullet; quick-release blade holder, fourth bullet
    Case
    Metal box, title
    Amazon reference
    B0FBSQQS6W (same reference on 6 Amazon marketplaces)
    EAN
    4260528721672
    • Two spare blades carried inside the handle
    • Blades for left- and right-handed use
    • The split of the 11 blades appears only in the photograph

    Best for: A left-handed maker, or anyone who wants spare blades in the handle and a box for the rest.

    ≈ $20 / 20 €
    Check price on Amazon
  • Kit laid out: flush cutter, three brushes, needles, deburrer and ten blades, two scrapers, a knife set in a blue case, a cutting mat, a zip pouch, three files and tweezers

    Monemey 42-piece 3D printer post-processing tool kit

    A 42-piece post-processing kit from Monemey that names a 360° metal deburrer, bendable nozzle cleaning needles, wire brushes, a stainless steel scraper, tweezers and a carving knife, without listing the 42 pieces.

    Itemised contents
    Absent from the listing text — 42 pieces in the title; deburrer, cleaning needles, wire brushes, scraper, tweezers and carving knife named in the bullets; the product photograph also shows a flush cutter, a knife set in a case, a cutting mat, a zip pouch and three needle files
    Removal and deburring tools
    Metal hand deburrer turning through 360°, stainless steel scraper and carving knife, third and fifth bullets
    Nozzle needles
    Cleaning needles that bend without breaking and turn through 360°, fourth bullet; sizes absent
    Cutters
    Absent from the listing text — the product photograph shows a blue flush cutter
    Blade storage
    Absent from the listing text — the product photograph shows the knife blades in a blue case
    Case
    Absent from the listing text — the product photograph shows a blue zip pouch
    Amazon reference
    B0FLXWPD1Q (same reference on 6 Amazon marketplaces)
    EAN
    0768799594680
    • Cleaning needles described as bendable without breaking
    • A stainless scraper and a carving knife for support removal
    • The 42 pieces are not itemised in the text, only shown in the photograph

    Best for: A maker who wants a general kit and can check the contents on arrival rather than from the page.

    ≈ 18 €
    Check price on Amazon
  • Clear acrylic panels of increasing size standing in a slotted orange base, with a Made in Germany stamp

    EH Design Clear acrylic sheet 20 × 20 cm, 3 mm, laser-polished edges, cut to order

    A clear 3 mm acrylic sheet from EH Design, 20 × 20 cm, cut to size with laser-polished edges, UV-protected and stated to stay free of yellowing for up to 30 years, made in Germany.

    Cast or extruded
    Absent from the listing
    Thickness and tolerance
    3 mm, title; cut “to the millimetre”, second bullet; no tolerance figure
    Sheet size
    20 × 20 cm, cut to order, title and second bullet
    Colour and transparency
    Clear and transparent, first bullet
    Film
    Absent from the listing
    Laser suitability
    Edges laser-polished by the seller, second bullet; engraving not described
    Amazon reference
    B07QHX8KFF (same reference on 5 Amazon marketplaces)
    EAN
    4251393305081
    • Laser-polished edges, no finishing needed
    • UV protection with a stated 30-year yellowing figure
    • Cast or extruded not stated

    Best for: A maker needing a small clear panel with finished edges, ready to fit.

    ≈ 9 €
    Check price on Amazon

All 3D printer enclosures