Skip to content

Dried for a day before it is sealed

3DHoJor PETG 1.75 mm, white, 1 kg, dried and vacuum-sealed

A 1 kg spool of white 3DHoJor PETG in 1.75 mm, dried for 24 hours and vacuum-sealed with desiccant, described as tough, moisture-resistant and glossy, with no tolerance or print settings published.

3DHoJor white PETG filament spool

3DHoJor PETG 1.75 mm, white, 1 kg, dried and vacuum-sealed

A 1 kg spool of white 3DHoJor PETG in 1.75 mm, dried for 24 hours and vacuum-sealed with desiccant, described as tough, moisture-resistant and glossy, with no tolerance or print settings published.

Diameter tolerance
Absent from the listing — 1.75 mm in the title
Net weight
1 kg, title
Recommended temperatures
Absent from the listing
Adhesion guidance
Absent from the listing — printing without warping or shrinking is claimed, second bullet
Moisture packaging
Dried for 24 hours, then vacuum-sealed with a desiccant bag, fifth bullet
Transparency
Described as glossy with high clarity and light transmission, fourth bullet
Spool size
Absent from the listing
Amazon reference
B0F18YP1CJ (same reference on 6 Amazon marketplaces)
EAN
0614141603473
  • Dried for 24 hours before vacuum sealing with desiccant
  • The cheapest PETG of the four here
  • No diameter tolerance

Best for: Everyday PETG parts for someone who will set temperatures from their own printer profile.

≈ $12 / £11 / 9 €
Check price on Amazon

Specifications

Diameter tolerance
Absent from the listing — 1.75 mm in the title
Net weight
1 kg, title
Recommended temperatures
Absent from the listing
Adhesion guidance
Absent from the listing — printing without warping or shrinking is claimed, second bullet
Moisture packaging
Dried for 24 hours, then vacuum-sealed with a desiccant bag, fifth bullet
Transparency
Described as glossy with high clarity and light transmission, fourth bullet
Spool size
Absent from the listing
Amazon reference
B0F18YP1CJ (same reference on 6 Amazon marketplaces)
EAN
0614141603473

The 3DHoJor PETG listing, bullet by bullet

Five bullets: toughness and strength combining properties of PLA and ABS; entry-level PETG printing without warping or shrinking; moisture resistance for damp environments; a glossy surface with high clarity and light transmission for translucent models and lamp shades; and 24 hours of drying before vacuum sealing with desiccant.

Drying before sealing

24 hours, stated. PETG absorbs moisture and prints with bubbles and strings when wet. Drying before sealing, and saying so, is a process a buyer can hold the maker to.

PETG without settings

No nozzle or bed temperature, no tolerance, no spool size. SUNLU, reviewed alongside, publishes a full set of PETG settings; for this spool they have to come from the printer’s own profile.

Availability

At the last look-up, the German Amazon store was asking roughly 9 €.

It is sold in the American and British Amazon stores as well, in their own currency, which the euro figures above leave out on purpose.

The French, Italian and Spanish Amazon catalogues list the product, yet no seller was offering it.

Every figure here is Keepa’s reading on the date this page was last updated. Stock and prices can change at any time.

Prices quoted in this text were read on 15 September 2026. The live price is at the top of the page.

More PETG filament

  • eSUN PETG Basic black filament spool

    eSUN PETG Basic 1.75 mm, black, 1 kg

    A 1 kg spool of black eSUN PETG Basic in 1.75 mm, described as tough, glossy, weather- and chemical-resistant with good winding, sealed in a vacuum bag with desiccant, and published without a tolerance figure or print settings.

    Diameter tolerance
    Absent from the listing as a figure — “minimal tolerance” and tight diameter tolerance are described, third and fourth bullets
    Net weight
    1 kg, title
    Recommended temperatures
    Absent from the listing
    Adhesion guidance
    Absent from the listing — good layer bonding is claimed, third bullet
    Moisture packaging
    Vacuum-sealed bag with desiccant, fifth bullet
    Transparency
    Described as having excellent clarity, light transmission and high gloss, first bullet
    Spool size
    Absent from the listing
    Amazon reference
    B0DDTFL214 (same reference on 5 Amazon marketplaces)
    EAN
    6922572209060
    • Weather and chemical resistance named, with toughness close to ABS as described
    • Good winding without overlaps, as the fourth bullet states
    • Tolerance described but not given as a figure

    Best for: General PETG parts such as containers and accessories, printed from a known profile.

    ≈ 12 €
    Check price on Amazon
  • Kingroon black PETG filament spool

    Kingroon PETG 1.75 mm ±0.02 mm, black, 1 kg

    A 1 kg spool of black Kingroon PETG in 1.75 mm with a ±0.02 mm tolerance, whose listing states heat resistance up to 84 °C and flexural strength up to 69.6 MPa, vacuum-sealed with desiccant.

    Diameter tolerance
    ±0.02 mm, title and fourth bullet
    Net weight
    1 kg, title
    Recommended temperatures
    Absent from the listing — heat resistance of up to 84 °C is stated for printed parts, second bullet
    Adhesion guidance
    Absent from the listing — strong layer adhesion is claimed, fifth bullet
    Moisture packaging
    Vacuum-sealed with desiccant, fifth bullet
    Transparency
    Absent from the listing
    Spool size
    Absent from the listing
    Amazon reference
    B0C6G8MDZX (same reference on 5 Amazon marketplaces)
    EAN
    0749684714185
    • Material figures published: heat resistance to 84 °C, flexural strength to 69.6 MPa
    • A ±0.02 mm tolerance and tangle-free winding
    • No print temperatures or bed guidance

    Best for: Functional brackets, tool holders and enclosures where a published heat and strength figure helps choose a material.

    ≈ 10 €
    Check price on Amazon
  • SUNLU black PETG filament spool

    SUNLU PETG 1.75 mm, black, 1 kg, with print settings

    A 1 kg spool of black SUNLU PETG in 1.75 mm with a ±0.02 mm tolerance, whose listing recommends a 220–230 °C nozzle, a 60–70 °C bed and speeds from 40 to 600 mm/s, in airtight vacuum packaging.

    Diameter tolerance
    ±0.02 mm, eighth bullet
    Net weight
    1 kg, title
    Recommended temperatures
    Nozzle 220–230 °C, bed 60–70 °C, print speed 40–600 mm/s, seventh bullet
    Adhesion guidance
    Absent from the listing as guidance — excellent layer adhesion is claimed, second bullet
    Moisture packaging
    Airtight vacuum packaging, ninth bullet
    Transparency
    Absent from the listing
    Spool size
    Absent from the listing
    Amazon reference
    B07TJDTJZD (same reference on 5 Amazon marketplaces)
    EAN
    0768894219198
    • Recommended nozzle, bed and speed settings published
    • A ±0.02 mm tolerance
    • No desiccant mentioned

    Best for: A first PETG spool, printed from the settings on the listing.

    ≈ £13 / 14 €
    Check price on Amazon

Elsewhere on the workbench

  • AzureFilm PLA Matte HS filament spool in bordeaux

    AzureFilm PLA Matte HS 1.75 mm, bordeaux, 1 kg, for fast printers

    A 1 kg spool of bordeaux AzureFilm PLA Matte HS in 1.75 mm with a ±0.02 mm tolerance, an ultra-matte finish and a reinforced formulation stated to extrude stably at up to 600 mm/s.

    Diameter and tolerance
    1.75 mm ±0.02 mm, fourth bullet
    Net weight
    1 kg, title and sixth bullet
    Spool size
    Absent from the listing
    Recommended temperatures
    Absent from the listing
    Finish
    Ultra-matte, non-glossy, first bullet; bordeaux, title
    Winding
    Absent from the listing
    Packaging
    Sealed spool, delivered moisture-protected, sixth bullet
    Amazon reference
    B0F9HC8ZGG (same reference on 6 Amazon marketplaces)
    EAN
    3830063546828
    • An ultra-matte finish combined with a high-speed formulation
    • Extrusion stated as stable at up to 600 mm/s
    • No temperatures, spool size or winding information

    Best for: Display models and cosplay parts printed quickly on a high-speed printer.

    ≈ 17 €
    Check price on Amazon
  • Two Creality Ender PLA filament spools in black and white

    Creality Ender PLA 1.75 mm, black and white, two 1 kg spools

    Creality Ender PLA in 1.75 mm black and white, sold as a two-pack of 1 kg spools in the title and described as a four-pack in the first bullet, with low shrinkage and EPC automatic winding.

    Diameter and tolerance
    1.75 mm, fifth bullet; no tolerance figure given
    Net weight
    2 × 1 kg in the title; the first bullet refers to a 4-pack
    Spool size
    Absent from the listing
    Recommended temperatures
    Absent from the listing
    Finish
    Absent from the listing — black and white, title
    Winding
    EPC automatic winding with precise diameter, third bullet
    Packaging
    Absent from the listing
    Amazon reference
    B0BY25RJLH (same reference on 5 Amazon marketplaces)
    EAN
    6971636405528
    • A multi-pack from a printer maker, for 1.75 mm FFF printers
    • EPC automatic winding for tangle-free feeding
    • Two-pack in the title, four-pack in the first bullet

    Best for: A Creality printer owner who wants black and white PLA in bulk, once the pack size has been confirmed.

    ≈ 30 €
    Check price on Amazon
  • eSUN PLA Basic white filament spool

    eSUN PLA Basic 1.75 mm for fast printers, white, 1 kg

    A 1 kg spool of white eSUN PLA Basic in 1.75 mm with a ±0.03 mm tolerance, formulated for high-speed printing and named as compatible with printers including the AnkerMake M5, sealed in a vacuum bag with desiccant.

    Diameter and tolerance
    1.75 mm ±0.03 mm, title
    Net weight
    1 kg, title
    Spool size
    Absent from the listing
    Recommended temperatures
    Absent from the listing
    Finish
    Absent from the listing — white, title
    Winding
    Absent from the listing
    Packaging
    Vacuum-sealed bag with desiccant, fifth bullet
    Amazon reference
    B0CR1CS3K8 (same reference on 5 Amazon marketplaces)
    EAN
    6922572205635
    • Formulated for high-speed printing, with compatible printers named
    • Vacuum-sealed with a desiccant bag
    • A ±0.03 mm tolerance, looser than the ±0.02 mm of four other PLAs here

    Best for: Fast CoreXY and high-speed bed-slinger printers, including the AnkerMake M5 reviewed on this site.

    ≈ £12 / 13 €
    Check price on Amazon

All PETG filament