Skip to content

Dried before sealing, and says for how long

3DHoJor Matte PLA 1.75 mm, peach pink, 1 kg

A 1 kg spool of peach-pink matte PLA from 3DHoJor in 1.75 mm with a ±0.02 mm tolerance, mechanically wound and checked by hand, and dried for 24 hours before vacuum sealing with desiccant.

3DHoJor matte PLA filament spool in peach pink

3DHoJor Matte PLA 1.75 mm, peach pink, 1 kg

A 1 kg spool of peach-pink matte PLA from 3DHoJor in 1.75 mm with a ±0.02 mm tolerance, mechanically wound and checked by hand, and dried for 24 hours before vacuum sealing with desiccant.

Diameter and tolerance
1.75 mm ±0.02 mm, fourth bullet
Net weight
1 kg, title
Spool size
Absent from the listing
Recommended temperatures
Absent from the listing
Finish
Matte, described as hiding layer lines, first bullet; peach pink, title
Winding
Fully mechanical winding with strict manual checks, fourth bullet
Packaging
Dried for 24 hours, then vacuum-sealed with desiccant, fifth bullet
Amazon reference
B0CRZ3433T (same reference on 6 Amazon marketplaces)
EAN
0774882966258
  • Dried for 24 hours before sealing, as the fifth bullet states
  • A matte finish that the listing says hides layer lines
  • No temperatures or spool dimensions

Best for: Decorative prints, figures and cosplay pieces where a non-glossy finish matters.

≈ £11 / 14 €
Check price on Amazon

Specifications

Diameter and tolerance
1.75 mm ±0.02 mm, fourth bullet
Net weight
1 kg, title
Spool size
Absent from the listing
Recommended temperatures
Absent from the listing
Finish
Matte, described as hiding layer lines, first bullet; peach pink, title
Winding
Fully mechanical winding with strict manual checks, fourth bullet
Packaging
Dried for 24 hours, then vacuum-sealed with desiccant, fifth bullet
Amazon reference
B0CRZ3433T (same reference on 6 Amazon marketplaces)
EAN
0774882966258

The 3DHoJor matte PLA listing, bullet by bullet

Five bullets: a matte surface that hides layers, with improved bed adhesion and extrusion; higher toughness and adhesion than normal PLA for accessories, toys, sculptures and cosplay; plant-based starch raw materials; mechanical winding, manual checks and 1.75 mm ±0.02 mm; and 24 hours of drying before vacuum sealing with desiccant.

Matte PLA and layer lines

A matte surface scatters light. Layer lines show less on a non-glossy print, which is why matte PLAs are chosen for display pieces. The first bullet describes that effect and gives no roughness or gloss figure.

Drying stated in hours

Many listings say their filament is dry. 3DHoJor says it was dried for 24 hours before sealing, which is a process rather than a promise.

A narrow sale

Priced only on the German and British Amazon stores. For buyers elsewhere, availability is the first thing to check.

Availability

At the last look-up, the German Amazon store was asking roughly 14 €.

It is sold in the British Amazon store as well, in its own currency, which the euro figures above leave out on purpose.

The American, French, Italian and Spanish Amazon catalogues list the product, yet no seller was offering it.

Every figure here is Keepa’s reading on the date this page was last updated. Stock and prices can change at any time.

Prices quoted in this text were read on 15 September 2026. The live price is at the top of the page.

More PLA filament

  • AzureFilm PLA Matte HS filament spool in bordeaux

    AzureFilm PLA Matte HS 1.75 mm, bordeaux, 1 kg, for fast printers

    A 1 kg spool of bordeaux AzureFilm PLA Matte HS in 1.75 mm with a ±0.02 mm tolerance, an ultra-matte finish and a reinforced formulation stated to extrude stably at up to 600 mm/s.

    Diameter and tolerance
    1.75 mm ±0.02 mm, fourth bullet
    Net weight
    1 kg, title and sixth bullet
    Spool size
    Absent from the listing
    Recommended temperatures
    Absent from the listing
    Finish
    Ultra-matte, non-glossy, first bullet; bordeaux, title
    Winding
    Absent from the listing
    Packaging
    Sealed spool, delivered moisture-protected, sixth bullet
    Amazon reference
    B0F9HC8ZGG (same reference on 6 Amazon marketplaces)
    EAN
    3830063546828
    • An ultra-matte finish combined with a high-speed formulation
    • Extrusion stated as stable at up to 600 mm/s
    • No temperatures, spool size or winding information

    Best for: Display models and cosplay parts printed quickly on a high-speed printer.

    ≈ 17 €
    Check price on Amazon
  • Two Creality Ender PLA filament spools in black and white

    Creality Ender PLA 1.75 mm, black and white, two 1 kg spools

    Creality Ender PLA in 1.75 mm black and white, sold as a two-pack of 1 kg spools in the title and described as a four-pack in the first bullet, with low shrinkage and EPC automatic winding.

    Diameter and tolerance
    1.75 mm, fifth bullet; no tolerance figure given
    Net weight
    2 × 1 kg in the title; the first bullet refers to a 4-pack
    Spool size
    Absent from the listing
    Recommended temperatures
    Absent from the listing
    Finish
    Absent from the listing — black and white, title
    Winding
    EPC automatic winding with precise diameter, third bullet
    Packaging
    Absent from the listing
    Amazon reference
    B0BY25RJLH (same reference on 5 Amazon marketplaces)
    EAN
    6971636405528
    • A multi-pack from a printer maker, for 1.75 mm FFF printers
    • EPC automatic winding for tangle-free feeding
    • Two-pack in the title, four-pack in the first bullet

    Best for: A Creality printer owner who wants black and white PLA in bulk, once the pack size has been confirmed.

    ≈ 30 €
    Check price on Amazon
  • eSUN PLA Basic white filament spool

    eSUN PLA Basic 1.75 mm for fast printers, white, 1 kg

    A 1 kg spool of white eSUN PLA Basic in 1.75 mm with a ±0.03 mm tolerance, formulated for high-speed printing and named as compatible with printers including the AnkerMake M5, sealed in a vacuum bag with desiccant.

    Diameter and tolerance
    1.75 mm ±0.03 mm, title
    Net weight
    1 kg, title
    Spool size
    Absent from the listing
    Recommended temperatures
    Absent from the listing
    Finish
    Absent from the listing — white, title
    Winding
    Absent from the listing
    Packaging
    Vacuum-sealed bag with desiccant, fifth bullet
    Amazon reference
    B0CR1CS3K8 (same reference on 5 Amazon marketplaces)
    EAN
    6922572205635
    • Formulated for high-speed printing, with compatible printers named
    • Vacuum-sealed with a desiccant bag
    • A ±0.03 mm tolerance, looser than the ±0.02 mm of four other PLAs here

    Best for: Fast CoreXY and high-speed bed-slinger printers, including the AnkerMake M5 reviewed on this site.

    ≈ £12 / 13 €
    Check price on Amazon

Elsewhere on the workbench

  • Three white mats labelled Standard Adhesive with black inch grids and a note for Silhouette Cameo 3 and other cutters

    LCOUACEO Standard grip cutting mats 12 × 12 in for Silhouette Cameo 1–4, 3 pack

    Three standard grip PVC cutting mats from LCOUACEO, 12 × 12 in with an overall size of 34.5 × 32.5 cm and translucent black grid lines, for Silhouette Cameo 1, 2, 3 and 4 cutting machines, with a light adhesive in the grid area and a protective film.

    Size and machine fit
    12 × 12 in cutting area, 34.5 × 32.5 cm overall, for Silhouette Cameo 1, 2, 3 and 4 and other digital cutting machines, title and second and fourth bullets
    Grip level
    Standard grip, light adhesive in the grid area, title and first and second bullets
    Material suitability
    Stickers, embossed and light card, card, patterned paper, iron-on and vinyl, fifth bullet
    Grid markings
    Translucent black measuring lines, third bullet
    Pack contents
    3 cutting mats, fifth bullet
    Film
    Protective film to remove before use and replace after, fourth bullet
    Care advice
    Put the film back after use to keep dust off the adhesive, fourth bullet
    Amazon reference
    B0BR28FKHG (same reference on 5 Amazon marketplaces)
    EAN
    0754008156312
    • Overall size given: 34.5 × 32.5 cm
    • Black grid lines for measuring
    • Standard grip only

    Best for: A Silhouette Cameo 3 or 4 cutting machine owner who wants spare standard mats with clear grid lines.

    ≈ 13 €
    Check price on Amazon
  • Three gridded mats: blue labelled LightGrip, purple labelled StrongGrip, and green also labelled StrongGrip, its film peeled back

    AOOIIN Cutting mats 12 × 12 in, light, standard and strong grip, for Cricut cutting plotters, 3 pack

    Three 12 × 12 in PVC cutting mats from AOOIIN, one each of light, standard and strong grip, for Cricut Explore 5, 4, 3, One, Air and Air 2 and Maker, Maker 3 and Maker 4 cutting machines, with a clear film to keep on in storage.

    Size and machine fit
    12 × 12 in, for Cricut Explore 5, 4, 3, One, Air, Air 2, Maker, Maker 3 and Maker 4 cutting machines, title and first bullet
    Grip level
    Light, standard and strong grip, first bullet
    Material suitability
    Card, construction paper, printable fabric and iron-on, pearl paper, printer paper, parchment, vinyl, washi sheets, window film, fourth bullet
    Grid markings
    Absent from the listing text — the product photograph shows inch grids
    Pack contents
    3 mats of 12 × 12 in, first bullet; in the product photograph the green mat is labelled StrongGrip, like the purple one
    Film
    Clear film, fifth bullet
    Care advice
    Keep the clear film on in storage to keep off paper scraps and dust, fifth bullet
    Amazon reference
    B08PSKT5MT (same reference on 6 Amazon marketplaces)
    EAN
    0738629607033
    • Three grip levels in one pack
    • Cricut cutting plotter models named one by one
    • Two mats labelled StrongGrip in the photograph, none StandardGrip

    Best for: A Cricut Maker or Explore cutting machine owner who wants to try all three grips before buying more of one.

    ≈ $10 / £11 / 13 €
    Check price on Amazon
  • Three transparent StandardGrip mats with inch grids, labelled 8 in × 12 in (20.32 × 30.48 cm)

    Prime Vinyl Standard grip cutting mats 30.5 × 20.3 cm for Silhouette Portrait, 3 pack

    Three transparent standard grip cutting mats from Prime Vinyl, 30.5 × 20.3 cm (12 × 8 in) with a grid, made for Silhouette Portrait cutting machines, holding vinyl, craft paper, sticker paper and light card, in reusable PVC with a protective film.

    Size and machine fit
    30.5 × 20.3 cm (12 × 8 in) for Silhouette Portrait cutting machines, title and first bullet; Silhouette Cameo named in the fourth and fifth bullets
    Grip level
    Standard grip, title and first and second bullets
    Material suitability
    Vinyl, craft paper, sticker paper and light card, second bullet
    Grid markings
    Gridded, title; the product photograph shows an inch grid
    Pack contents
    3 transparent mats, title and first bullet
    Film
    Protective film to put back after use, fifth bullet
    Care advice
    Replace the film after use; remove residue carefully with a spatula, fifth bullet
    Amazon reference
    B0DG8V8P5J (same reference on 5 Amazon marketplaces)
    EAN
    0769047696996
    • The Silhouette Portrait size: 12 × 8 in
    • Materials for standard grip named
    • Portrait in the title, Cameo in the bullets

    Best for: A Silhouette Portrait cutting machine owner replacing worn standard mats.

    ≈ 10 €
    Check price on Amazon

All PLA filament