Skip to content

A long list of resistances

eSUN TPU-95A 1.75 mm, black, 1 kg

A 1 kg spool of black eSUN TPU-95A in 1.75 mm, listing resistance to oil, solvents, scratches, tearing and weather, with good winding, in a vacuum-sealed bag with desiccant and no print settings.

eSUN black TPU-95A filament spool

eSUN TPU-95A 1.75 mm, black, 1 kg

A 1 kg spool of black eSUN TPU-95A in 1.75 mm, listing resistance to oil, solvents, scratches, tearing and weather, with good winding, in a vacuum-sealed bag with desiccant and no print settings.

Shore hardness
95A, title and first bullet
Diameter tolerance
Absent from the listing as a figure — very tight tolerance described, third bullet
Net weight
1 kg net, title and fifth bullet
Recommended speed and temperatures
Absent from the listing
Extruder guidance
Absent from the listing
Packaging
Vacuum-sealed bag with desiccant, fifth bullet
Amazon reference
B07PM2R9ZM (same reference on 6 Amazon marketplaces)
EAN
0781520911426
  • Resistance to oil, solvents, scratches, tearing, flexing and weather named
  • Net filament weight stated as 1 kg
  • No tolerance figure

Best for: Flexible parts exposed to oil or outdoor conditions, such as gaskets, bumpers and straps.

≈ $28 / £19 / 18 €
Check price on Amazon

Specifications

Shore hardness
95A, title and first bullet
Diameter tolerance
Absent from the listing as a figure — very tight tolerance described, third bullet
Net weight
1 kg net, title and fifth bullet
Recommended speed and temperatures
Absent from the listing
Extruder guidance
Absent from the listing
Packaging
Vacuum-sealed bag with desiccant, fifth bullet
Amazon reference
B07PM2R9ZM (same reference on 6 Amazon marketplaces)
EAN
0781520911426

The eSUN TPU-95A listing, bullet by bullet

Five bullets: Shore 95A flexibility with a long list of properties — resilience, transparency, strength, wear, tear and flex resistance, and resistance to oil, solvents, scratches, weather and chemicals; minimal tolerance and warping; tangle-free winding without clogging; uses in keyrings, insoles, watch straps and phone cases; and a net weight of 1 kg in a vacuum bag with desiccant.

Resistances listed

Oil, solvents, weather. For flexible parts outside or near machinery, these are the properties that matter. They are stated as a list, without the conditions or durations that would make them comparable.

Net weight, named as such

“Filament net weight: 1 kg.” It is a small detail, and it removes the doubt about whether a spool’s weight includes the spool itself.

Settings absent from the eSUN page

No temperatures, no speed, no extruder note. TPU is the filament where those matter most, and a printer profile has to supply them.

Availability

At the last look-up, the German, French, Italian and Spanish Amazon stores were asking 18 € to 21 €.

It is sold in the American and British Amazon stores as well, in their own currency, which the euro figures above leave out on purpose.

Every figure here is Keepa’s reading on the date this page was last updated. Stock and prices can change at any time.

Prices quoted in this text were read on 15 September 2026. The live price is at the top of the page.

More TPU filament

  • OVERTURE white TPU filament spool

    OVERTURE TPU 95A 1.75 mm, white, stretches over three times its length

    White OVERTURE TPU 95A in 1.75 mm, described as stretching to more than three times its original length without breaking and keeping for a year unopened when stored properly, with no spool weight given in the text.

    Shore hardness
    95A, title and first bullet
    Diameter tolerance
    Absent from the listing
    Net weight
    Absent from the listing text — the spool label in the photograph reads 1 kg
    Recommended speed and temperatures
    Absent from the listing
    Extruder guidance
    Absent from the listing
    Packaging
    Absent from the listing — a 1-year shelf life for unopened spools stored properly is stated, fifth bullet
    Amazon reference
    B09RFGDC6Q (same reference on 4 Amazon marketplaces)
    EAN
    0810031298686
    • Shore 95A and an elongation claim of more than three times the original length
    • Guidance that wall thickness and infill tune flexibility and stiffness
    • No weight in the text; only the photographed spool label reads 1 kg

    Best for: Flexible wearables and phone cases where tuning stiffness through infill is part of the design.

    ≈ 17 €
    Check price on Amazon
  • GEEETECH black TPU 95A filament spool

    GEEETECH TPU 95A 1.75 mm, black, 1 kg, with drying guidance

    A 1 kg spool of black GEEETECH TPU 95A in 1.75 mm, dried for 24 hours and vacuum-sealed in a resealable foil bag, whose listing advises storage with silica gel or drying for more than 8 hours at 65 °C.

    Shore hardness
    95A, title and first two bullets
    Diameter tolerance
    Absent from the listing text — the spool label in the photograph reads ±0.03 mm
    Net weight
    1 kg, title
    Recommended speed and temperatures
    Absent from the listing as print settings — drying at 65 °C for more than 8 hours is advised, fourth bullet
    Extruder guidance
    Absent from the listing
    Packaging
    Dried for 24 hours, vacuum-sealed in resealable foil bags, fourth bullet
    Amazon reference
    B0DPKBHKX9 (same reference on 4 Amazon marketplaces)
    EAN
    6974994174716
    • Dried for 24 hours before sealing, in a resealable foil bag
    • Drying guidance for later: more than 8 hours at 65 °C, or storage with silica gel
    • No print temperatures or speed

    Best for: A maker who prints TPU occasionally and needs to keep an opened spool usable.

    ≈ 18 €
    Check price on Amazon
  • SainSmart PEBA 90A black flexible filament spool

    SainSmart PEBA 90A flexible filament 1.75 mm, black, 1 kg

    A 1 kg spool of black SainSmart PEBA 90A in 1.75 mm, a nylon-based elastomer sold as a replacement for TPU, stated to be 20 % less dense than TPU with 78 % energy return, for printers with dual-gear extruders.

    Shore hardness
    90A, title and first bullet
    Diameter tolerance
    Absent from the listing
    Net weight
    1 kg, title
    Recommended speed and temperatures
    Absent from the listing as figures — described as printing up to 2× faster than TPU at higher flow, fourth bullet
    Extruder guidance
    Most FDM printers with 1.75 mm filament and dual-gear extruders, fifth bullet
    Packaging
    Absent from the listing
    Amazon reference
    B0FLPRXBWH (same reference on 6 Amazon marketplaces)
    EAN
    0810168145013
    • A PEBA elastomer: 20 % lower density than TPU and 78 % energy return, as stated
    • Extruder guidance given: dual-gear extruders
    • About three times the price of the TPU spools here

    Best for: Lightweight, springy parts such as drone guards and shoe insoles where rebound and weight matter more than cost.

    ≈ $53 / £56 / 55 €
    Check price on Amazon

Elsewhere on the workbench

  • RESIONE water-washable resin bottle in orange

    RESIONE Water Washable resin, 405 nm, flaming orange, 1 kg

    A 1 kg bottle of RESIONE water-washable resin in flaming orange for 405 nm printers, with viscosity described as close to water for high-speed modes, said to work with standard resin parameters, and no exposure figures.

    Wavelength
    405 nm, title; the bottle in the product photograph reads 385–405 nm
    Volume
    1 kg, title
    Recommended exposure
    Absent from the listing as figures — described as compatible with the standard resin parameters of most printers, second and sixth bullets
    Wash and cure advice
    Washes with water, no alcohol or IPA needed, first and third bullets; proper post-curing mentioned, fifth bullet
    Brittleness
    Described as not cracking after proper post-curing under varying indoor temperatures and humidity, fifth bullet
    Finish
    Flaming orange, title
    Disposal guidance
    Absent from the listing
    Amazon reference
    B0CLY9VLJR (same reference on 4 Amazon marketplaces)
    EAN
    0735812277288
    • Described as working with standard resin parameters, without special settings
    • Viscosity close to water, for larger prints and high-speed modes
    • No exposure figures and no disposal guidance

    Best for: Painted miniatures and moulds on a printer running default resin settings, where cracking has been a problem.

    ≈ 42 €
    Check price on Amazon
  • Silver Cricut weeder with a fine hooked tip and a pink hanging loop

    Cricut Weeder tool, single

    A single weeder tool from Cricut, made for lifting tiny negative cuts out of vinyl and iron-on designs, for stickers and home decor made on Cricut cutting machines.

    Itemised contents
    1 weeder tool, first bullet
    Hook and pick tips
    Made for lifting tiny negative cuts, second bullet; the product photograph shows a fine hooked tip
    Tweezers
    Absent from the listing
    Scraper
    Absent from the listing
    Spatula
    Absent from the listing
    Grip
    Absent from the listing
    Tip protection
    Absent from the listing
    Storage
    Absent from the listing
    Amazon reference
    B07SRDNCLN (same reference on 6 Amazon marketplaces)
    EAN
    0093573079016
    • Made by the cutting machine maker
    • For all vinyl and iron-on types
    • A single tool

    Best for: A Cricut cutting machine owner who needs just a hook for small lettering.

    ≈ $6 / £8 / 7 €
    Check price on Amazon
  • Ruler, craft knife, spatula, hook, tweezers, covered scissors, scraper, five blades and a felt pouch

    ImnBest Weeding tool set with craft knife, 5 blades and storage bag

    A weeding set from ImnBest with a hook, reverse-grip hook tweezers, micro-tip scissors with a removable cover, a spatula, a precision craft knife with five blades and a scraper, kept in a storage bag; the title says 13 pieces.

    Itemised contents
    1 hook, 1 hook tweezers, 1 scissors with removable cover, 1 spatula, 1 precision craft knife + 5 blades, 1 scraper and a storage bag, first bullet; 13 pieces in the title
    Hook and pick tips
    1 hook remover, first bullet
    Tweezers
    Hook tweezers with a reverse grip, fourth bullet
    Scraper
    1 scraper, first bullet
    Spatula
    1 spatula, first bullet
    Grip
    Absent from the listing
    Tip protection
    Removable cover on the micro-tip scissors, to protect the blade and the user, second and fourth bullets
    Storage
    Storage bag, first bullet
    Amazon reference
    B09QGCVH1Y (same reference on 6 Amazon marketplaces)
    EAN
    0792119433410
    • A precision craft knife with five spare blades
    • A cover on the scissors and a storage bag
    • The ruler that makes 13 appears only in the photograph

    Best for: A crafter who trims as well as weeds and wants a knife and a bag with the set.

    ≈ £5
    Check price on Amazon

All TPU filament