Accuracy is quoted for an object size, and the size is part of the figure · review
3DMakerpro Fox handheld scanner, 0.07 mm stated review
A handheld scanner sold to 3D-printing hobbyists, whose listing states 0.07 mm accuracy and 0.10 mm resolution without saying under what conditions, and includes a manual turntable in the box.
The bottom line An entry into scanning that is well equipped for the price — turntable, software, markerless tracking — and poorly described where scanners are compared: technology, size range, formats, and the conditions behind its accuracy figure.
The Fox listing, bullet by bullet
Five bullets: a scanner designed for 3D-printing enthusiasts that turns objects into 3D models; handheld with 0.07 mm accuracy and 0.10 mm resolution, presented as suited to reverse engineering, modelling and quality control; markerless AI tracking that re-finds the scan point within seconds; the JMStudio software combining scanning, editing and optimisation; and a package with the scanner, a manual turntable and a power supply.
An accuracy figure without its conditions
0.07 mm is printed without an object, a distance or a mode. A scanner’s accuracy depends on all three, and makers who publish it carefully say which. This listing does not, so the figure can be quoted but not compared, and it is not a tolerance anyone can expect on a measured part.
Inside the Fox box
The manual turntable is the practical addition: small objects scanned on a rotating base need far less handheld movement. The power supply is listed too; whether the scanner also runs on a battery is not stated.
What a buyer still has to find
The scanning principle, the smallest and largest objects it handles, the file formats it exports and the computer JMStudio needs are all absent. Each decides whether the scanner fits a particular workflow.
Availability
At the last look-up, the German, French, Italian and Spanish Amazon stores were asking roughly 240 €.
It is sold in the British Amazon store as well, in its own currency, which the euro figures above leave out on purpose.
The American Amazon catalogue lists the product, yet no seller was offering it.
Every figure here is Keepa’s reading on the date this page was last updated. Stock and prices can change at any time.
Prices quoted in this text were read on 15 September 2026. The live price is at the top of the page.
Where it earns its place, and where it falls short
Strengths
Markerless tracking, so objects do not need reference stickers before scanning
A manual turntable and the power supply are in the box, as the fifth bullet lists
The cheapest of the three scanners here
Compromises
The 0.07 mm figure has no conditions, so it cannot be compared with another scanner’s accuracy
No scanning technology, object size range or output formats published
No computer requirements, although processing runs in the maker’s software
Specifications
Published accuracy and its conditions
0.07 mm accuracy and 0.10 mm resolution, second bullet; no object size, scanning distance or mode is attached to either figure
Technology
Absent from the listing — handheld and AI-assisted, with no light source or scanning principle named
Object size range
Absent from the listing
Tracking method
Markerless AI tracking that re-finds the scan position within seconds after fast movement, third bullet
Output formats
Absent from the listing
Computing requirements
Absent from the listing — the JMStudio software is named, not the computer it needs
Amazon reference
B0H32GW2TN (same reference on 6 Amazon marketplaces)
EAN
6975925241613
Questions makers ask before buying
What does 0.07 mm accuracy mean on this listing?
It is the figure the maker publishes, beside a 0.10 mm resolution, without stating the object, distance or mode it applies to. This page reports it as the maker’s claim and does not treat it as the tolerance a scanned part will meet.
Does it need markers stuck on the object?
The third bullet describes markerless AI tracking, which finds its position again automatically after fast movements. No markers are mentioned as necessary.
No accuracy figure published · 17 blue laser lines and VCSEL infrared · 2,500,000 points/s stated · Wi-Fi 6 · swappable battery up to 3 h · EXStar Hub software
The dearest scanner here, pairing a 17-line blue laser with VCSEL infrared and a swappable battery for up to three hours, whose listing publishes speeds, frame rates and lux limits but no accuracy figure at all.
Best for: A buyer scanning reflective or dark parts in bright or changing light who can confirm accuracy and software requirements with the maker first.
0.03 mm stated for blue-laser mode · 7 blue laser lines plus infrared structured light · objects 5 to 2,000 mm · Wi-Fi 6 · two 3,350 mAh batteries · STL, OBJ, PLY and ASC export
A 260 g wireless scanner combining seven blue laser lines with infrared structured light for objects from 5 to 2,000 mm, whose listing publishes demanding phone and computer requirements alongside its 0.03 mm accuracy figure.
Best for: A maker who already owns a recent flagship phone or a strong workstation and wants to scan objects from coin to furniture size without cables.
Low-temperature PCL, 1.75 mm · 2 speeds and 2 temperature levels · cordless, USB-C charging · TouchSafe design · 37 m of PCL in 12 colours included
A cordless 3D pen for children that draws with low-temperature PCL filament, with two speeds and two temperature levels, and a maker’s note that it is used according to the instructions and under supervision.
Best for: A younger child’s first 3D pen, used with an adult nearby, where a low-temperature filament is the point.
