Heat recovery at the tip, and the tips you can still buy next year · review
YIHUA 926LED-IV EVO, 110 W, three presets and calibration review
A 110 W soldering station adjustable from 90 to 480 °C with three stored temperature presets, digital calibration against a thermocouple and an ESD grounding cable, sold with four helping hands and an LED magnifier.
The bottom line The most complete bench kit of the five, with presets, calibration, a named tip system and an ESD grounding lead. Its tips tie the owner to YIHUA, and it publishes no heat-up or stability figure.
The YIHUA 926LED-IV EVO listing, bullet by bullet
Five bullets: a set of the 110 W station, three tips, 50 g of lead-free solder, four helping hands, an LED magnifier, a tip cleaner, a sponge, a solder dispenser and an ESD grounding cable; a 110 W element, 90–480 °C, PID stabilisation and three stored temperature presets; several mounting points for the helping hands, a dispenser on either side and a brass wool cleaner with a spatter cover; sleep after a set idle time and digital calibration against a thermocouple; and a one-year EU warranty, 230 V with a type F plug, and YIHUA’s own EVO 110W tips.
Calibration on the YIHUA station
The station can be corrected to a measured tip temperature. Tips wear and displays drift, and a calibration function lets the number on screen follow the tip. The listing is careful to say a thermocouple thermometer is needed to do it.
A tip system with a name
EVO 110W tips are named and sold by YIHUA. That makes replacements easy to identify, and it also means other makers’ tips are not described as compatible.
A grounding cable in the YIHUA box
An ESD grounding cable is the only ESD item named as a physical part among the five stations reviewed here; the others describe a design. The listing includes it without explaining how it connects to the bench.
Availability
At the last look-up, the German, French, Italian and Spanish Amazon stores were asking 70 € to 77 €.
The American and British Amazon stores returned no entry, so the buy button there opens a search rather than a missing page.
Every figure here is Keepa’s reading on the date this page was last updated. Stock and prices can change at any time.
Prices quoted in this text were read on 15 September 2026. The live price is at the top of the page.
Where it earns its place, and where it falls short
Strengths
Three stored temperature presets and digital calibration against a thermocouple
A named tip system, YIHUA’s own EVO 110W tips
An ESD grounding cable, four helping hands, an LED magnifier and 50 g of lead-free solder
Compromises
No heat-up time or stability figure
The EVO 110W tips are proprietary to YIHUA
Calibration requires a separate professional thermocouple thermometer, as the fourth bullet notes
Specifications
Power
110 W heating element, title and second bullet
Temperature range
90–480 °C, title and second bullet
Stability
Absent from the listing as a figure — a PID stabilisation programme is described, second bullet
Heat-up time
Absent from the listing
Tip system
YIHUA’s own EVO 110W tips, fifth bullet; three tips included
Sleep mode
After an unused period of set length, fourth bullet
ESD protection
ESD-safe grounding cable included, first bullet
Ergonomics
Four helping hands on several mounting points, a solder dispenser mountable left or right, brass wool cleaner with a spatter cover and a sponge slot, third bullet
Amazon reference
B09NXV3XT1 (same reference on 4 Amazon marketplaces)
EAN
5060497924222
Questions makers ask before buying
Can the YIHUA 926LED-IV EVO be calibrated?
Yes. The fourth bullet describes a digital calibration function: measure the tip with a professional thermocouple thermometer and enter the value.
Which tips does the 926LED-IV EVO use?
The fifth bullet says it uses YIHUA’s own EVO 110W tips.
80 W · 150–450 °C, stepless · standby and auto power-off · 3 programmable fixed temperatures · over 40 tips in the 0832 and 0842 series, 0.4–14 mm · 2.2 mm ERSADUR chisel tip included
An 80 W digital soldering station set steplessly from 150 to 450 °C, with standby, automatic power-off and three programmable temperatures, compatible with more than forty tips of the 0832 and 0842 series.
Best for: A school, workshop or serious hobbyist who wants a station whose tips can be bought in dozens of shapes for years.
75 W · 50–480 °C · ceramic heating element · auto sleep · ESD-safe design · 2 extra tips
A 75 W digital soldering station with a ceramic heating element adjustable from 50 to 480 °C, an automatic sleep function and an ESD-safe design, sold with two extra tips.
Best for: Electronics repair on sensitive components where an ESD-safe station is wanted at a moderate price.
60 W · 90–480 °C · PID, ±2 °C display to actual stated · 300 °C in 15 s · sleep after 10 minutes · °F/°C · 2 helping hands · 5 extra tips
A 60 W soldering station adjustable from 90 to 480 °C, with PID control stated to keep the displayed and actual temperatures within ±2 °C, sleep after ten idle minutes and two detachable helping hands.
Best for: A hobbyist soldering small boards who wants the board held while both hands work the iron and solder.
