Skip to content

A desiccant pack for every bag

Creality Filament vacuum storage bags 35 × 35 cm, 12 with desiccant

Twelve 35 × 35 cm filament bags from Creality, each with a zip closure and a desiccant pack, double-sealed zips and capped vent openings, sized for standard 0.5–1 kg spools of 1.75 or 2.85 mm filament.

Creality box beside folded bags with blue zips, a round valve and cap, two silica gel packs and two blue zip sliders

Creality Filament vacuum storage bags 35 × 35 cm, 12 with desiccant

Twelve 35 × 35 cm filament bags from Creality, each with a zip closure and a desiccant pack, double-sealed zips and capped vent openings, sized for standard 0.5–1 kg spools of 1.75 or 2.85 mm filament.

Capacity and spool fit
35 × 35 cm; a standard 1 kg spool, 0.5–1 kg, 1.75 or 2.85 mm, fifth bullet
Seal type
Double-sealed zips and vent openings with secure caps, third bullet; 12 zip closures, first bullet
Desiccant method
12 desiccant packs, one per bag, first bullet
Hygrometer
Absent from the listing
Feed-through ports
Absent from the listing
Format
12 thickened, transparent reusable bags, title and first and third bullets
Amazon reference
B0G3NRD16Y (same reference on 5 Amazon marketplaces)
EAN
0198549096285
  • A desiccant pack for each of the twelve bags
  • Capped vent openings as well as double-sealed zips
  • No pump listed, though a vacuum is described

Best for: A maker storing twelve 1 kg spools after drying who wants desiccant in every bag.

≈ £20 / 17 €
Check price on Amazon

Specifications

Capacity and spool fit
35 × 35 cm; a standard 1 kg spool, 0.5–1 kg, 1.75 or 2.85 mm, fifth bullet
Seal type
Double-sealed zips and vent openings with secure caps, third bullet; 12 zip closures, first bullet
Desiccant method
12 desiccant packs, one per bag, first bullet
Hygrometer
Absent from the listing
Feed-through ports
Absent from the listing
Format
12 thickened, transparent reusable bags, title and first and third bullets
Amazon reference
B0G3NRD16Y (same reference on 5 Amazon marketplaces)
EAN
0198549096285

The Creality filament bag listing, bullet by bullet

Five bullets: 12 sealed bags of 35 × 35 cm, 12 zip closures and 12 desiccant packs, sealed after the filament is dried; moisture linked to stringing, clogs and poor bed adhesion; thickened, tear-resistant material with double-sealed zips and vent openings with secure caps; reuse over many cycles; and room for a standard 1 kg spool, 0.5 to 1 kg, 1.75 or 2.85 mm.

Creality’s order of steps

Dry first, then seal. The first bullet puts drying before bagging. A bag keeps dry filament dry; it is not described as drying a wet spool.

A vacuum without a Creality pump

The listing speaks of a vacuum and of vent openings with caps, but no pump appears in the contents or in the product photograph, which shows a round valve with its cap. How the air is drawn out is not described.

Availability

At the last look-up, the German, French, Italian and Spanish Amazon stores were asking 17 € to 26 €.

It is sold in the British Amazon store as well, in its own currency, which the euro figures above leave out on purpose.

The American Amazon store returned no entry, so the buy button there opens a search rather than a missing page.

Every figure here is Keepa’s reading on the date this page was last updated. Stock and prices can change at any time.

Prices quoted in this text were read on 15 September 2026. The live price is at the top of the page.

More filament storage

  • Twenty transparent bags with blue zips, two stacks of ten, each front bag with a round valve, and four blue clips

    AXVRAV Filament vacuum bags 30 × 34 cm with sealing clips

    Resealable 30 × 34 cm filament bags from AXVRAV in PE and PA with a double-layer zip and slide clips, embossed on one side for air removal; the title says 20 pieces and the photograph shows 20 bags, while the contents bullet lists 12 bags and 4 clips.

    Capacity and spool fit
    30 × 34 cm per bag; PLA, ABS and PETG named, title and first bullet; no spool size given
    Seal type
    Double-layer zip closed with a slide clip, air pressed out by hand, third and fourth bullets; the product photograph shows a round valve on the bags, which the text does not mention
    Desiccant method
    Absent from the listing
    Hygrometer
    Absent from the listing
    Feed-through ports
    Absent from the listing
    Format
    Transparent bags in PE and PA, embossed on one side; 12 bags and 4 clips in the first bullet, 20 pieces in the title, 20 bags and 4 clips in the product photograph
    Amazon reference
    B0FX5HFT7C (same reference on 6 Amazon marketplaces)
    EAN
    0758589440716
    • Double-layer zip with slide clips
    • One embossed side to help push the air out
    • Twenty bags in the title and photograph, twelve in the contents bullet

    Best for: A maker bagging opened spools of PLA or PETG on a small budget, with their own desiccant.

    ≈ 10 €
    Check price on Amazon
  • Green-edged bags marked Air Valve, a white hand pump, six white clips and two spools sealed in bags

    Toaren Filament vacuum bag kit, 22 bags 30 × 34 cm, hand pump and 6 clips

    Twenty-two 30 × 34 cm filament vacuum bags from Toaren with self-sealing valves, a double-layer zip, a hand pump and six sealing clips, for spools of 0.5 to 1 kg and filament of 1.75, 2.85 or 3 mm, with a vacuum stated in 30 seconds.

    Capacity and spool fit
    30 × 34 cm; 0.5, 0.75 and 1 kg spools of 1.75, 2.85 and 3 mm filament, second bullet
    Seal type
    Double-layer zip, sealing clip and self-sealing valve emptied with the hand pump, first, fourth and fifth bullets
    Desiccant method
    Absent from the listing
    Hygrometer
    Absent from the listing
    Feed-through ports
    Absent from the listing
    Format
    22 transparent bags of thickened PA+PE, 1 hand pump, 6 clips, title and second and third bullets
    Amazon reference
    B0D2W9LDKH (same reference on 6 Amazon marketplaces)
    EAN
    0799793226246
    • A hand pump and self-sealing valves included
    • Twenty-two bags
    • No desiccant

    Best for: A maker with many spools who wants to pump the air out of each bag rather than press it.

    ≈ 17 €
    Check price on Amazon
  • Six transparent boxes stacked in two rows, each holding a spool with a kraft label reading PLA, PETG or TPU

    YOOPAI Filament storage boxes 4.0 L, 6 pack, with desiccant and labels

    Six 4.0 L filament storage boxes from YOOPAI, 24.6 × 24.1 × 11.2 cm each, described as waterproof and dust-protected, with desiccant and labels for PLA, PETG, ABS and TPU.

    Capacity and spool fit
    4.0 L per box, 24.6 × 24.1 × 11.2 cm; 1.75 mm filaments, first, fourth and fifth bullets; no spool size given
    Seal type
    Absent from the listing — waterproof and dust-protected construction, second bullet
    Desiccant method
    Desiccant included, amount and type not given, second bullet
    Hygrometer
    Absent from the listing
    Feed-through ports
    Absent from the listing
    Format
    Set of 6 portable boxes with labels for PLA, PETG, ABS and TPU, first, third and fourth bullets
    Amazon reference
    B0F8B8C9Q6 (same reference on 6 Amazon marketplaces)
    EAN
    0850075053483
    • Box dimensions given: 24.6 × 24.1 × 11.2 cm
    • Six boxes in the set
    • No seal description

    Best for: A maker needing six boxes who can check the 24.6 × 24.1 × 11.2 cm dimensions against their spools.

    ≈ $34 / £28 / 30 €
    Check price on Amazon

Elsewhere on the workbench

  • Stack of milky white glue sticks

    Bosch Ultra glue sticks 7 × 150 mm, 30 pieces, 180 g

    Thirty Ultra glue sticks from Bosch, 7 mm across and 150 mm long, 180 g in all, a universal adhesive for all common 7 mm glue guns, described as milky in colour.

    Diameter
    7 mm, title and first bullet
    Length
    150 mm, title and first bullet
    Melt grade
    Absent from the listing
    Material suitability
    Powerful universal adhesive, third bullet; materials not named
    Open time
    Absent from the listing
    Colour
    Milky, fourth bullet; “Mehrfarbig” (multicoloured) in the title
    Count
    30 sticks, title
    Net weight
    180 g, first bullet
    Amazon reference
    B00SJ8RVUM (same reference on 5 Amazon marketplaces)
    EAN
    3165140800655
    • Weight given: 180 g
    • Long 150 mm sticks
    • Milky in the bullet, multicoloured in the title

    Best for: A 7 mm glue gun owner who wants long sticks from a tool maker.

    ≈ 6 €
    Check price on Amazon
  • Stack of translucent glue sticks seen end-on

    JelKen Hot glue sticks 11 × 200 mm, 45 pieces, clear, resin/EVA grade A+

    Forty-five clear hot glue sticks from JelKen, 11 × 200 mm, in resin and EVA graded A+, odourless, stated to bond very strongly after 30 seconds, for wood, metal, glass, plastic, floristry, fabric, leather and foam.

    Diameter
    11 mm, title and second bullet
    Length
    200 mm, title and second bullet
    Melt grade
    Absent from the listing — resin/EVA, quality grade A+, first bullet
    Material suitability
    Wood, metal, glass, plastic, floristry, fabric, leather, foam and more, fifth bullet
    Open time
    Absent from the listing — bonds very strongly after 30 seconds, third bullet
    Colour
    Transparent, title
    Count
    45 sticks, title and second bullet
    Net weight
    Absent from the listing
    Amazon reference
    B0H1CCBFD2 (same reference on 4 Amazon marketplaces)
    EAN
    9331194125424
    • A time given: strong bond after 30 seconds
    • Long 11 × 200 mm sticks
    • No weight or melt temperature

    Best for: An 11 mm glue gun owner, such as the Pattex or SEEKONE glue guns reviewed on this site, who wants long clear sticks.

    ≈ 14 €
    Check price on Amazon
  • Pyramid of white glue sticks with three loose sticks in front

    Relota Hot glue sticks 7 × 100 mm, 100 pieces, clear

    One hundred clear hot glue sticks from Relota, 7 × 100 mm, in solvent-free resin with cold flexibility and ageing resistance, for 7 mm glue guns and materials from metal and glass to textiles and card, with advice to measure the gun before buying.

    Diameter
    7 mm, title and fifth bullet
    Length
    100 mm, title and fifth bullet
    Melt grade
    Absent from the listing
    Material suitability
    Metal, wood, ceramics, glass, textiles, leather, paper, card and more, fourth bullet
    Open time
    Absent from the listing — melts fast and sets soon after application, third bullet
    Colour
    White-transparent, title and second bullet
    Count
    100 sticks, title and fifth bullet
    Net weight
    Absent from the listing
    Amazon reference
    B0BXSMN2DS (same reference on 6 Amazon marketplaces)
    EAN
    0709688601270
    • One hundred sticks
    • Materials named
    • Short 100 mm sticks

    Best for: A crafter with a 7 mm glue gun who goes through many short sticks.

    ≈ 7 €
    Check price on Amazon

All filament storage