Skip to content

Six boxes, with their dimensions

YOOPAI Filament storage boxes 4.0 L, 6 pack, with desiccant and labels

Six 4.0 L filament storage boxes from YOOPAI, 24.6 × 24.1 × 11.2 cm each, described as waterproof and dust-protected, with desiccant and labels for PLA, PETG, ABS and TPU.

Six transparent boxes stacked in two rows, each holding a spool with a kraft label reading PLA, PETG or TPU

YOOPAI Filament storage boxes 4.0 L, 6 pack, with desiccant and labels

Six 4.0 L filament storage boxes from YOOPAI, 24.6 × 24.1 × 11.2 cm each, described as waterproof and dust-protected, with desiccant and labels for PLA, PETG, ABS and TPU.

Capacity and spool fit
4.0 L per box, 24.6 × 24.1 × 11.2 cm; 1.75 mm filaments, first, fourth and fifth bullets; no spool size given
Seal type
Absent from the listing — waterproof and dust-protected construction, second bullet
Desiccant method
Desiccant included, amount and type not given, second bullet
Hygrometer
Absent from the listing
Feed-through ports
Absent from the listing
Format
Set of 6 portable boxes with labels for PLA, PETG, ABS and TPU, first, third and fourth bullets
Amazon reference
B0F8B8C9Q6 (same reference on 6 Amazon marketplaces)
EAN
0850075053483
  • Box dimensions given: 24.6 × 24.1 × 11.2 cm
  • Six boxes in the set
  • No seal description

Best for: A maker needing six boxes who can check the 24.6 × 24.1 × 11.2 cm dimensions against their spools.

≈ $34 / £28 / 30 €
Check price on Amazon

Specifications

Capacity and spool fit
4.0 L per box, 24.6 × 24.1 × 11.2 cm; 1.75 mm filaments, first, fourth and fifth bullets; no spool size given
Seal type
Absent from the listing — waterproof and dust-protected construction, second bullet
Desiccant method
Desiccant included, amount and type not given, second bullet
Hygrometer
Absent from the listing
Feed-through ports
Absent from the listing
Format
Set of 6 portable boxes with labels for PLA, PETG, ABS and TPU, first, third and fourth bullets
Amazon reference
B0F8B8C9Q6 (same reference on 6 Amazon marketplaces)
EAN
0850075053483

The YOOPAI storage box listing, bullet by bullet

Five bullets: a set of six 4.0 L filament boxes; waterproof, dust-protected construction with desiccant included; labels for PLA, PETG, ABS and TPU; a compact 24.6 × 24.1 × 11.2 cm per box for placing and carrying; and robust construction for all common 1.75 mm filaments.

YOOPAI gives the dimensions

24.6 × 24.1 × 11.2 cm. The only 4.0 L box listing here with outside dimensions. A spool’s diameter and width can be checked against them before buying, which a volume alone does not allow.

What YOOPAI does not describe

No bullet says how the lid seals, how much desiccant comes with the set, or whether a spool can feed filament from the box. The product photograph shows the six boxes stacked in two rows with kraft labels; no desiccant is visible in it.

Availability

At the last look-up, the German and French Amazon stores were asking 30 € to 40 €.

It is sold in the American and British Amazon stores as well, in their own currency, which the euro figures above leave out on purpose.

Asking prices on the Italian and Spanish Amazon stores ran past 1.6× the lowest country’s. A gap that size points to goods shipped in from abroad rather than a local seller, so those offers are left out of the figures above.

Every figure here is Keepa’s reading on the date this page was last updated. Stock and prices can change at any time.

Prices quoted in this text were read on 15 September 2026. The live price is at the top of the page.

More filament storage

  • Four tall transparent boxes with flip-up lids holding spools, three sheets of black labels, a white marker and eight silica gel packs

    Saccik Airtight filament dry boxes 4.0 L, 4 pack, with colour-change silica gel

    Four stackable 4.0 L filament boxes from Saccik with silicone seals and no hygrometer holes, two packs of colour-change silica gel per box, 24 wipeable labels and a marker, sized for standard 1 kg spools.

    Capacity and spool fit
    4.0 L, for standard 1 kg spools of plastic or cardboard, title and fourth bullet
    Seal type
    Silicone seal, seamless design, first bullet
    Desiccant method
    Two packs of silica gel per box, orange to green when saturated, regenerated in a microwave according to the second bullet
    Hygrometer
    None, by design: no holes drilled for one, first bullet
    Feed-through ports
    Absent from the listing
    Format
    4 modular, stackable boxes of transparent PLA plastic, 8 desiccant packs, 24 wipeable labels and 1 marker, fifth bullet
    Amazon reference
    B0GXP42TS9 (same reference on 5 Amazon marketplaces)
    EAN
    4897154280015
    • Reusable colour-change silica gel, two packs per box
    • Labels and a marker for an inventory
    • No hygrometer, so humidity is read only from the gel colour

    Best for: A maker organising a shelf of 1 kg spools between uses who prefers colour-change gel to a digital gauge.

    ≈ 23 €
    Check price on Amazon
  • Creality box beside folded bags with blue zips, a round valve and cap, two silica gel packs and two blue zip sliders

    Creality Filament vacuum storage bags 35 × 35 cm, 12 with desiccant

    Twelve 35 × 35 cm filament bags from Creality, each with a zip closure and a desiccant pack, double-sealed zips and capped vent openings, sized for standard 0.5–1 kg spools of 1.75 or 2.85 mm filament.

    Capacity and spool fit
    35 × 35 cm; a standard 1 kg spool, 0.5–1 kg, 1.75 or 2.85 mm, fifth bullet
    Seal type
    Double-sealed zips and vent openings with secure caps, third bullet; 12 zip closures, first bullet
    Desiccant method
    12 desiccant packs, one per bag, first bullet
    Hygrometer
    Absent from the listing
    Feed-through ports
    Absent from the listing
    Format
    12 thickened, transparent reusable bags, title and first and third bullets
    Amazon reference
    B0G3NRD16Y (same reference on 5 Amazon marketplaces)
    EAN
    0198549096285
    • A desiccant pack for each of the twelve bags
    • Capped vent openings as well as double-sealed zips
    • No pump listed, though a vacuum is described

    Best for: A maker storing twelve 1 kg spools after drying who wants desiccant in every bag.

    ≈ £20 / 17 €
    Check price on Amazon
  • Twenty transparent bags with blue zips, two stacks of ten, each front bag with a round valve, and four blue clips

    AXVRAV Filament vacuum bags 30 × 34 cm with sealing clips

    Resealable 30 × 34 cm filament bags from AXVRAV in PE and PA with a double-layer zip and slide clips, embossed on one side for air removal; the title says 20 pieces and the photograph shows 20 bags, while the contents bullet lists 12 bags and 4 clips.

    Capacity and spool fit
    30 × 34 cm per bag; PLA, ABS and PETG named, title and first bullet; no spool size given
    Seal type
    Double-layer zip closed with a slide clip, air pressed out by hand, third and fourth bullets; the product photograph shows a round valve on the bags, which the text does not mention
    Desiccant method
    Absent from the listing
    Hygrometer
    Absent from the listing
    Feed-through ports
    Absent from the listing
    Format
    Transparent bags in PE and PA, embossed on one side; 12 bags and 4 clips in the first bullet, 20 pieces in the title, 20 bags and 4 clips in the product photograph
    Amazon reference
    B0FX5HFT7C (same reference on 6 Amazon marketplaces)
    EAN
    0758589440716
    • Double-layer zip with slide clips
    • One embossed side to help push the air out
    • Twenty bags in the title and photograph, twelve in the contents bullet

    Best for: A maker bagging opened spools of PLA or PETG on a small budget, with their own desiccant.

    ≈ 10 €
    Check price on Amazon

Elsewhere on the workbench

  • Small stack of translucent glue sticks

    Steinel Hot glue sticks clear 7 × 150 mm, 40 pieces, 240 g

    Forty clear hot glue sticks from Steinel, 7 × 150 mm and 240 g, solvent-free and odourless, for Steinel GlueMatic 1007, MobileGlue 1007, neo1 and neo2 glue guns and all common 7 mm guns, with glued parts releasable afterwards with a heat gun.

    Diameter
    7 mm, title and first and fourth bullets
    Length
    150 mm, title and fifth bullet
    Melt grade
    Absent from the listing as a figure — an “optimal melting point” said to keep glue out of the gun’s electronics, second bullet
    Material suitability
    Leather, wood, glass, paper, card, cork, stone, porcelain, metal, textiles and ceramics, third bullet
    Open time
    Absent from the listing — fast-drying, second bullet
    Colour
    Crystal clear, almost invisible once set, first bullet
    Count
    40 sticks, title and fifth bullet
    Net weight
    240 g, title
    Amazon reference
    B09P1M72JM (same reference on 6 Amazon marketplaces)
    EAN
    4007841084615
    • Crystal clear, almost invisible joints
    • Weight given: 240 g
    • No melt temperature figure

    Best for: A Steinel 7 mm glue gun owner who wants clear joints that can be undone.

    ≈ 8 €
    Check price on Amazon
  • SHALL bag labelled 70 pack, full size, 8 × 0.43 in, 200 × 11 mm, all temp, with loose translucent sticks

    Shall Full-size EVA hot glue sticks 11 × 200 mm, 70 pieces, 2300 cPs+

    Seventy full-size clear hot glue sticks from SHALL, 11 × 200 mm, in flexible EVA with a stated viscosity of 2300 cPs+, compatible with high, low and dual-temperature glue guns, for paper, wood, foam, metal, textiles, glass and plastics.

    Diameter
    11 mm (0.43 in), title and first and third bullets
    Length
    200 mm (8 in), title and first and third bullets
    Melt grade
    For high, low and dual-temperature glue guns; flexible EVA, 2300 cPs+ stated, first and second bullets
    Material suitability
    Paper, wood, card, foam, string, metal, textile, glass and various plastics, fourth bullet
    Open time
    Absent from the listing — fast curing, second bullet
    Colour
    Clear, title
    Count
    70 sticks, title and third bullet
    Net weight
    Absent from the listing
    Amazon reference
    B0BRKN7HZC (same reference on 6 Amazon marketplaces)
    EAN
    0762983169722
    • For high, low and dual-temperature glue guns
    • A viscosity figure: 2300 cPs+
    • No melt temperature or open time

    Best for: An 11 mm glue gun owner who switches between hot and low-temperature settings.

    ≈ $19 / £17 / 18 €
    Check price on Amazon
  • WORKPRO W133235A bag labelled full size, 100 pack, 200 × 11 mm, with loose translucent sticks

    WORKPRO EVA hot glue sticks 11 × 200 mm, 100 pieces

    One hundred hot glue sticks from WORKPRO in EVA, 11 × 200 mm, for all common 11 mm glue guns, melting and bonding quickly, for paper, card, wood, plastic, feathers, shells, ceramics, glass and rubber.

    Diameter
    11 mm, title and first and fifth bullets
    Length
    200 mm, title and first and fifth bullets
    Melt grade
    Absent from the listing text — EVA, second bullet; the bag in the product photograph reads general purpose glue for high, dual and low temperature guns
    Material suitability
    Paper, card, wood, plastic, feathers, shells, ceramics, glass, rubber, fourth bullet
    Open time
    Absent from the listing — fast melting and bonding, third bullet
    Colour
    Absent from the listing text — the product photograph shows translucent sticks
    Count
    100 sticks, title and fifth bullet
    Net weight
    Absent from the listing
    Amazon reference
    B08B68JRQX (same reference on 6 Amazon marketplaces)
    EAN
    0820909766377
    • One hundred 11 × 200 mm sticks
    • EVA named
    • No colour, weight or melt temperature

    Best for: A workshop running 11 mm glue guns all day that wants long sticks in bulk.

    ≈ £16 / 21 €
    Check price on Amazon

All filament storage