Skip to content

The nozzle, not the pump

SCULPFUN S9 air assist nozzle kit with tube and sealing ring, pump not included

An official all-metal air assist nozzle from SCULPFUN for S9 and S6 Pro laser modules with the conical shroud, made after October 2021, supplied with an air tube, sealing ring and fittings but no air pump.

SCULPFUN nozzle with brass elbow, red acrylic shield, blue air tube, three green O-rings, screws, hex keys and a black band

SCULPFUN S9 air assist nozzle kit with tube and sealing ring, pump not included

An official all-metal air assist nozzle from SCULPFUN for S9 and S6 Pro laser modules with the conical shroud, made after October 2021, supplied with an air tube, sealing ring and fittings but no air pump.

Airflow
Absent from the listing
Pressure
Absent from the listing
Nozzle fit
SCULPFUN S9 and S6 Pro modules with the conical shroud, from October 2021; earlier machines not suitable, first and second bullets
Flow control
Absent from the listing
Noise
Absent from the listing
Tubing
Air tube, sealing ring and installation parts included, fifth bullet; the product photograph shows a blue tube, three green O-rings, a red acrylic shield, four screws and two hex keys
Power supply
Absent from the listing — no pump included, third and fifth bullets
Amazon reference
B0B69D875D (same reference on 6 Amazon marketplaces)
EAN
9039089732817
  • A plain cut-off: S9 and S6 Pro modules from October 2021
  • A sealing ring that keeps pump air in and dust off the lens
  • Air pump not included

Best for: A SCULPFUN S9 or S6 Pro owner with a post-October 2021 module and an air pump already on the bench.

≈ $40 / £36 / 35 €
Check price on Amazon

Specifications

Airflow
Absent from the listing
Pressure
Absent from the listing
Nozzle fit
SCULPFUN S9 and S6 Pro modules with the conical shroud, from October 2021; earlier machines not suitable, first and second bullets
Flow control
Absent from the listing
Noise
Absent from the listing
Tubing
Air tube, sealing ring and installation parts included, fifth bullet; the product photograph shows a blue tube, three green O-rings, a red acrylic shield, four screws and two hex keys
Power supply
Absent from the listing — no pump included, third and fifth bullets
Amazon reference
B0B69D875D (same reference on 6 Amazon marketplaces)
EAN
9039089732817

The SCULPFUN S9 air assist listing, bullet by bullet

Five bullets: an official all-metal nozzle for the S9, installed in a few minutes; a check that the module has the conical shroud, since machines before October 2021 cannot take it; plywood and MDF cut 2–3 times faster and cleaner, with the pump not included; a sealing ring that stops air escaping and keeps dust off the lens; and the nozzle, air tube, sealing ring and installation parts in the box.

SCULPFUN’s October 2021 line

Check the shroud first. The second bullet ties compatibility to a physical detail and a date, which is more useful than a model name alone when the same model changed during production.

The SCULPFUN kit without air

This is the nozzle half of an air assist system. The pump that feeds it is bought separately, and the listing gives no airflow it expects. The product photograph shows what does come: the nozzle with a brass elbow, a red acrylic shield, a blue tube, three O-rings, screws and hex keys.

Availability

At the last look-up, the German, French, Italian and Spanish Amazon stores were asking 35 € to 40 €.

It is sold in the American and British Amazon stores as well, in their own currency, which the euro figures above leave out on purpose.

Every figure here is Keepa’s reading on the date this page was last updated. Stock and prices can change at any time.

Prices quoted in this text were read on 15 September 2026. The live price is at the top of the page.

More laser air assist

  • Silver cylindrical ATOMSTACK pump with a knob, black tube, steel bracket with blue shield and three cone nozzles

    ATOMSTACK Air assist set 10–30 L/min with 2 m tube, for short-glass A10 Pro, X7 Pro, S10 Pro heads

    An air assist set from ATOMSTACK with adjustable 10–30 L/min airflow, 60 dB, a 2 m tube and a quick-release nozzle for A5, A10 Pro, X7 and S10 series engravers, limited to the original short-glass laser head.

    Airflow
    10–30 L/min adjustable, title and first bullet
    Pressure
    Absent from the listing
    Nozzle fit
    A10 Pro, A5 M50 Pro, A5 M50, A5 M40, A5 Pro, A5, X7, X7 Pro, S10 and S10 Pro, original short-glass laser head only; not long-glass models, first and fifth bullets
    Flow control
    Adjustable 10–30 L/min, first bullet
    Noise
    60 dB, third bullet
    Tubing
    2 m tube, title and fourth bullet
    Power supply
    Absent from the listing
    Amazon reference
    B09V361ZC4 (same reference on 5 Amazon marketplaces)
    EAN
    0860013771249
    • A noise figure: 60 dB
    • A 2 m tube for the moving head
    • Not for long-glass laser heads

    Best for: An ATOMSTACK A5, A10 Pro, X7 or S10 owner with the original short-glass head.

    ≈ 110 €
    Check price on Amazon
  • Creality air pump on a mains cable with inline dial and European plug, with a nozzle, bracket, O-ring, tubes and cable ties

    Creality Air assist pump 6 gal/min with adjustment knob, for Creality laser engravers

    Creality’s air assist pump for its laser engravers, named for the CR-Laser Falcon 10W and most Creality engravers except the Laser 5W, with 6 gal/min of airflow, an adjustment knob and silicone feet, and noise stated at no more than 45 dB.

    Airflow
    6 gal/min, title and first bullet
    Pressure
    Absent from the listing
    Nozzle fit
    CR-Laser Falcon 10W in the title; most Creality laser engravers except the Laser 5W, fourth bullet
    Flow control
    Adjustment knob for different air strengths, fourth bullet
    Noise
    No more than 45 dB stated, with soft silicone feet, third bullet
    Tubing
    Absent from the listing text — the product photograph shows short white tube pieces and a nozzle with a copper elbow
    Power supply
    Absent from the listing text — the product photograph shows a mains cable with a European plug and an inline dial
    Amazon reference
    B0CS6HCKK5 (same reference on 5 Amazon marketplaces)
    EAN
    0198549004792
    • A noise ceiling stated: 45 dB
    • An adjustment knob for the airflow
    • Not for the Creality Laser 5W

    Best for: A Creality CR-Laser Falcon owner adding air assist from the same maker.

    ≈ 76 €
    Check price on Amazon
  • Twin-head air pump with a ribbed grey body and a brass outlet blowing air downward

    HongKKon Air assist pump 16 W, 30 L/min, with inline flow switch

    A 16 W air assist pump from HongKKon with a copper motor and magnetic levitation piston, giving up to 6.6 gal/min, 30 L/min in the title, at 0.03 MPa, with an inline switch to adjust the flow from zero.

    Airflow
    Up to 6.6 gal/min, first bullet; 30 L/min in the title
    Pressure
    0.03 MPa, first bullet
    Nozzle fit
    Absent from the listing
    Flow control
    Inline switch, 0 to 6.6 gal/min, third bullet
    Noise
    Absent from the listing as a figure — low-noise in the title
    Tubing
    Absent from the listing
    Power supply
    16 W, title and first bullet; voltage not given
    Amazon reference
    B0FQTWRQL7 (same reference on 5 Amazon marketplaces)
    EAN
    0751591604121
    • A pressure figure: 0.03 MPa
    • An inline switch to set the flow from zero
    • No noise figure

    Best for: A diode engraver owner who already has a nozzle on the module and needs a pump with adjustable flow.

    ≈ 44 €
    Check price on Amazon

Elsewhere on the workbench

  • Fanned plywood sheets printed A4 3mm 10PCS 300 × 210mm, with a wooden globe, truck and motorbike

    VIBINHO Plywood 3 mm, A4 300 × 210 mm, 10 sheets, ±0.2 mm

    Ten A4 plywood sheets from VIBINHO, 300 × 210 × 3 mm with a length and width tolerance of ±0.2 mm, in natural wood with no species named, for laser cutting and engraving, painting and model making.

    Thickness
    3 mm, title and second bullet
    Sheet size
    300 × 210 mm, length and width tolerance ±0.2 mm, second bullet
    Species
    Absent from the listing — “natural wood”, first bullet
    Glue type
    Absent from the listing
    Flatness
    Absent from the listing
    Grade
    Absent from the listing
    Quantity
    10 sheets, title and second bullet
    Amazon reference
    B0FDGS7X36 (same reference on 6 Amazon marketplaces)
    EAN
    0787439427690
    • A length and width tolerance given: ±0.2 mm
    • Laser cutting and engraving named
    • Wood species not named

    Best for: A laser user fitting parts edge to edge who wants sheet dimensions held to a stated tolerance.

    ≈ 13 €
    Check price on Amazon
  • Stack of plain plywood sheets, the front one printed A4 3mm 10pcs

    WISYOK Basswood plywood 3 mm, A4 300 × 210 mm, 10 sheets

    Ten A4 sheets of 3 mm basswood plywood from WISYOK with a medium glue layer, 300 × 210 mm with a size tolerance stated as within 5 %, for knives, circular saws and laser cutting, with a reminder to follow the machine’s manual.

    Thickness
    3 mm, title and second bullet
    Sheet size
    300 × 210 mm, size tolerance within 5 %, second bullet
    Species
    Basswood (linden), first bullet
    Glue type
    Medium glue layer, first bullet; adhesive type not named
    Flatness
    Absent from the listing
    Grade
    Absent from the listing
    Quantity
    10 sheets, title
    Amazon reference
    B0CWN15BD4 (same reference on 6 Amazon marketplaces)
    EAN
    0797424908080
    • Basswood named
    • Laser cutting and engraving named, with a pointer to the machine manual
    • 5 % of a 300 mm edge is 15 mm

    Best for: A laser user cutting parts well inside the sheet, where the edge dimension does not matter.

    ≈ £14 / 16 €
    Check price on Amazon
  • Genmitsu chuck on a long base with a tailstock, six spare jaws, three pins, and an engraved bottle, glass, ball and rings

    Genmitsu MD18 3-in-1 rotary chuck for Genmitsu L8 and Z6, 0–30° tilt

    A 3-in-1 multi-jaw rotary chuck from Genmitsu for its L8 and Z6 engravers, connected by USB and 6-pin cable, clamping L-shaped, ladder-shaped and hexagonal objects with one hand, tilting from 0 to 30° and working with LightBurn.

    Roller or chuck design
    3-in-1 multi-jaw chuck with one-handed clamping, title and second bullet
    Diameter range
    L-shaped 60–120 mm, ladder-shaped 60–120 mm, hexagonal 10–80 mm objects, second bullet
    Maximum length
    Absent from the listing text — the product photograph shows a tailstock on a long base
    Height
    Absent from the listing
    Connector
    USB + 6-pin connection cable, first bullet
    Software support
    LightBurn and the software supplied with the Genmitsu L8 and Z6, third bullet
    Tilt adjustment
    0 to 30°, fourth bullet
    Amazon reference
    B0CTHCYGHC (same reference on 6 Amazon marketplaces)
    EAN
    0816550029565
    • Tilt from 0 to 30° for tapered objects
    • No assembly: plug in and engrave, as the third bullet says
    • Made for Genmitsu L8 and Z6; other brands need a connector check

    Best for: A Genmitsu L8 or Z6 owner engraving glasses, rings and tapered cups.

    ≈ $106 / 111 €
    Check price on Amazon

All laser air assist