Skip to content

A noise figure on the page

Creality Air assist pump 6 gal/min with adjustment knob, for Creality laser engravers

Creality’s air assist pump for its laser engravers, named for the CR-Laser Falcon 10W and most Creality engravers except the Laser 5W, with 6 gal/min of airflow, an adjustment knob and silicone feet, and noise stated at no more than 45 dB.

Creality air pump on a mains cable with inline dial and European plug, with a nozzle, bracket, O-ring, tubes and cable ties

Creality Air assist pump 6 gal/min with adjustment knob, for Creality laser engravers

Creality’s air assist pump for its laser engravers, named for the CR-Laser Falcon 10W and most Creality engravers except the Laser 5W, with 6 gal/min of airflow, an adjustment knob and silicone feet, and noise stated at no more than 45 dB.

Airflow
6 gal/min, title and first bullet
Pressure
Absent from the listing
Nozzle fit
CR-Laser Falcon 10W in the title; most Creality laser engravers except the Laser 5W, fourth bullet
Flow control
Adjustment knob for different air strengths, fourth bullet
Noise
No more than 45 dB stated, with soft silicone feet, third bullet
Tubing
Absent from the listing text — the product photograph shows short white tube pieces and a nozzle with a copper elbow
Power supply
Absent from the listing text — the product photograph shows a mains cable with a European plug and an inline dial
Amazon reference
B0CS6HCKK5 (same reference on 5 Amazon marketplaces)
EAN
0198549004792
  • A noise ceiling stated: 45 dB
  • An adjustment knob for the airflow
  • Not for the Creality Laser 5W

Best for: A Creality CR-Laser Falcon owner adding air assist from the same maker.

≈ 76 €
Check price on Amazon

Specifications

Airflow
6 gal/min, title and first bullet
Pressure
Absent from the listing
Nozzle fit
CR-Laser Falcon 10W in the title; most Creality laser engravers except the Laser 5W, fourth bullet
Flow control
Adjustment knob for different air strengths, fourth bullet
Noise
No more than 45 dB stated, with soft silicone feet, third bullet
Tubing
Absent from the listing text — the product photograph shows short white tube pieces and a nozzle with a copper elbow
Power supply
Absent from the listing text — the product photograph shows a mains cable with a European plug and an inline dial
Amazon reference
B0CS6HCKK5 (same reference on 5 Amazon marketplaces)
EAN
0198549004792

The Creality air assist pump listing, bullet by bullet

Five bullets: 6 gal/min of airflow, bringing more oxygen for faster and deeper cuts; smoke and heat blown away for cleaner edges and a steadier lens temperature; silicone feet and no more than 45 dB; an adjustment knob and compatibility with most Creality engravers except the Laser 5W; and Creality’s warranty and 24-hour response.

Creality’s 45 dB

A number where others say quiet. The third bullet gives a ceiling, not a typical value, and no distance or conditions. Of the pumps here, ATOMSTACK gives 60 dB; the others give no figure.

Creality and the Falcon A1

The Falcon A1 reviewed on this site comes with an air assist set in the box, as that review notes. This pump names the CR-Laser Falcon 10W and most Creality engravers in general, not the Falcon A1 by name. The product photograph shows a nozzle with a copper elbow, a bracket and fittings beside the pump, which the bullets do not list.

Availability

At the last look-up, the German, French, Italian and Spanish Amazon stores were asking 76 € to 100 €.

The British Amazon catalogue lists the product, yet no seller was offering it.

The American Amazon store returned no entry, so the buy button there opens a search rather than a missing page.

Every figure here is Keepa’s reading on the date this page was last updated. Stock and prices can change at any time.

Prices quoted in this text were read on 15 September 2026. The live price is at the top of the page.

More laser air assist

  • Twin-head air pump with a ribbed grey body and a brass outlet blowing air downward

    HongKKon Air assist pump 16 W, 30 L/min, with inline flow switch

    A 16 W air assist pump from HongKKon with a copper motor and magnetic levitation piston, giving up to 6.6 gal/min, 30 L/min in the title, at 0.03 MPa, with an inline switch to adjust the flow from zero.

    Airflow
    Up to 6.6 gal/min, first bullet; 30 L/min in the title
    Pressure
    0.03 MPa, first bullet
    Nozzle fit
    Absent from the listing
    Flow control
    Inline switch, 0 to 6.6 gal/min, third bullet
    Noise
    Absent from the listing as a figure — low-noise in the title
    Tubing
    Absent from the listing
    Power supply
    16 W, title and first bullet; voltage not given
    Amazon reference
    B0FQTWRQL7 (same reference on 5 Amazon marketplaces)
    EAN
    0751591604121
    • A pressure figure: 0.03 MPa
    • An inline switch to set the flow from zero
    • No noise figure

    Best for: A diode engraver owner who already has a nozzle on the module and needs a pump with adjustable flow.

    ≈ 44 €
    Check price on Amazon
  • Grey WOXCKER pump with a red OFF–MAX knob, coiled black tube, red acrylic bracket, black cone nozzle and hex key

    Woxcker Air assist pump 0–30 L/min with rotary switch, nozzle and connector

    A metal air assist pump from Woxcker with 0–30 L/min set by a rotary switch, four rubber feet, and an air assist nozzle, air line connector and mounting tools, for Woxcker JL7 and JL5 and modules from other laser brands.

    Airflow
    0–30 L/min adjustable, title and second bullet
    Pressure
    Adjustable with the rotary switch, third bullet; no figure given
    Nozzle fit
    Air assist nozzle included, third bullet; for Woxcker JL7 and JL5 and most laser modules, with eight other laser engraver brands named, fifth bullet
    Flow control
    Rotary switch for pressure and airflow, third bullet
    Noise
    Absent from the listing as a figure — low noise, fourth bullet
    Tubing
    Air line connector included, third bullet; tube length not given
    Power supply
    Absent from the listing
    Amazon reference
    B0CL4N5TWF (same reference on 6 Amazon marketplaces)
    EAN
    0754932075833
    • A nozzle, connector and mounting tools included with the pump
    • Metal body on four rubber feet
    • No noise, pressure or power figure

    Best for: A diode engraver owner with no air assist at all who wants pump and nozzle together.

    ≈ $110 / £100 / 110 €
    Check price on Amazon
  • SCULPFUN nozzle with brass elbow, red acrylic shield, blue air tube, three green O-rings, screws, hex keys and a black band

    SCULPFUN S9 air assist nozzle kit with tube and sealing ring, pump not included

    An official all-metal air assist nozzle from SCULPFUN for S9 and S6 Pro laser modules with the conical shroud, made after October 2021, supplied with an air tube, sealing ring and fittings but no air pump.

    Airflow
    Absent from the listing
    Pressure
    Absent from the listing
    Nozzle fit
    SCULPFUN S9 and S6 Pro modules with the conical shroud, from October 2021; earlier machines not suitable, first and second bullets
    Flow control
    Absent from the listing
    Noise
    Absent from the listing
    Tubing
    Air tube, sealing ring and installation parts included, fifth bullet; the product photograph shows a blue tube, three green O-rings, a red acrylic shield, four screws and two hex keys
    Power supply
    Absent from the listing — no pump included, third and fifth bullets
    Amazon reference
    B0B69D875D (same reference on 6 Amazon marketplaces)
    EAN
    9039089732817
    • A plain cut-off: S9 and S6 Pro modules from October 2021
    • A sealing ring that keeps pump air in and dust off the lens
    • Air pump not included

    Best for: A SCULPFUN S9 or S6 Pro owner with a post-October 2021 module and an air pump already on the bench.

    ≈ $40 / £36 / 35 €
    Check price on Amazon

Elsewhere on the workbench

  • Fanned plywood sheets printed 12PCS A4 2mm 210mm × 300mm, with small wooden model kits

    KORVORIA Basswood plywood 2 mm, A4 300 × 210 mm, 12 sheets

    Twelve A4 sheets of 2 mm plywood from KORVORIA in basswood with a medium-density glue layer, 300 × 210 mm, sanded on both sides and sold for laser cutting, CNC routing and hand tools.

    Thickness
    2 mm, title and fourth bullet
    Sheet size
    300 × 210 mm (A4), tolerance described as strictly controlled without a figure, title and first bullet
    Species
    Basswood (linden), second bullet
    Glue type
    Medium-density glue layer, second bullet; adhesive type not named
    Flatness
    Absent from the listing as a figure — “excellent flatness” without warping, fourth bullet
    Grade
    Absent from the listing
    Quantity
    12 sheets, title and first bullet
    Amazon reference
    B0H5171HR8 (same reference on 4 Amazon marketplaces)
    EAN
    8901089518481
    • The thinnest plywood of the seven: 2 mm
    • Basswood named as the species
    • No tolerance figure

    Best for: A diode laser user cutting fine models and puzzles that need thin, light sheets.

    ≈ 12 €
    Check price on Amazon
  • Stack of plywood sheets labelled A4 13 PACK, 300 × 210 × 3 mm, with wooden animal models

    lompyeu Birch plywood 3 mm, A4 300 × 210 mm, 13 sheets

    Thirteen A4 sheets of 3 mm birch plywood from lompyeu, 300 × 210 mm, sanded smooth, described as not chemically treated and meeting EU environmental standards, for laser cutting, CNC routing and fretwork.

    Thickness
    3 mm, title and second bullet
    Sheet size
    300 × 210 mm (A4), title
    Species
    Birch plywood, first bullet
    Glue type
    Absent from the listing
    Flatness
    Absent from the listing — stored dry to avoid warping, fifth bullet
    Grade
    Absent from the listing
    Quantity
    13 sheets, title
    Amazon reference
    B0FDWLKCB7 (same reference on 4 Amazon marketplaces)
    EAN
    0717710014264
    • Birch named as the species
    • Laser cutting and CNC routing named
    • No tolerance, glue or grade

    Best for: A laser or CNC user who prefers birch plywood at A4 size.

    ≈ 15 €
    Check price on Amazon
  • Fanned plywood sheets printed A3 3mm 12PACKS, with a wooden ship, train and car

    Pavlleen Basswood plywood 3 mm, A3 420 × 300 mm, 12 sheets

    Twelve A3 sheets of 3 mm basswood plywood from Pavlleen, 420 × 300 mm, with a polished, even-coloured surface and clean edges, for laser engraving and cutting and for scroll and band saws.

    Thickness
    3 mm, title
    Sheet size
    420 × 300 mm (A3), title
    Species
    Basswood (linden), first bullet
    Glue type
    Absent from the listing
    Flatness
    Absent from the listing
    Grade
    Absent from the listing
    Quantity
    12 sheets, title
    Amazon reference
    B0DPHGWG4M (same reference on 5 Amazon marketplaces)
    EAN
    0744915850243
    • A3 sheets in basswood
    • Laser engraving and cutting named
    • No tolerance, glue or grade

    Best for: A laser user with a bed large enough for A3 who wants basswood rather than an unnamed species.

    ≈ 26 €
    Check price on Amazon

All laser air assist