Skip to content

Pump and nozzle in one box

Woxcker Air assist pump 0–30 L/min with rotary switch, nozzle and connector

A metal air assist pump from Woxcker with 0–30 L/min set by a rotary switch, four rubber feet, and an air assist nozzle, air line connector and mounting tools, for Woxcker JL7 and JL5 and modules from other laser brands.

Grey WOXCKER pump with a red OFF–MAX knob, coiled black tube, red acrylic bracket, black cone nozzle and hex key

Woxcker Air assist pump 0–30 L/min with rotary switch, nozzle and connector

A metal air assist pump from Woxcker with 0–30 L/min set by a rotary switch, four rubber feet, and an air assist nozzle, air line connector and mounting tools, for Woxcker JL7 and JL5 and modules from other laser brands.

Airflow
0–30 L/min adjustable, title and second bullet
Pressure
Adjustable with the rotary switch, third bullet; no figure given
Nozzle fit
Air assist nozzle included, third bullet; for Woxcker JL7 and JL5 and most laser modules, with eight other laser engraver brands named, fifth bullet
Flow control
Rotary switch for pressure and airflow, third bullet
Noise
Absent from the listing as a figure — low noise, fourth bullet
Tubing
Air line connector included, third bullet; tube length not given
Power supply
Absent from the listing
Amazon reference
B0CL4N5TWF (same reference on 6 Amazon marketplaces)
EAN
0754932075833
  • A nozzle, connector and mounting tools included with the pump
  • Metal body on four rubber feet
  • No noise, pressure or power figure

Best for: A diode engraver owner with no air assist at all who wants pump and nozzle together.

≈ $110 / £100 / 110 €
Check price on Amazon

Specifications

Airflow
0–30 L/min adjustable, title and second bullet
Pressure
Adjustable with the rotary switch, third bullet; no figure given
Nozzle fit
Air assist nozzle included, third bullet; for Woxcker JL7 and JL5 and most laser modules, with eight other laser engraver brands named, fifth bullet
Flow control
Rotary switch for pressure and airflow, third bullet
Noise
Absent from the listing as a figure — low noise, fourth bullet
Tubing
Air line connector included, third bullet; tube length not given
Power supply
Absent from the listing
Amazon reference
B0CL4N5TWF (same reference on 6 Amazon marketplaces)
EAN
0754932075833

The Woxcker air assist listing, bullet by bullet

Five bullets: surface cooling and smoke removal for cleaner edges; 0–30 L/min adjustable to protect the module lens; a nozzle, air line connector and mounting tools, with a rotary switch for pressure and flow; a metal body on four rubber feet, described as reducing debris fire risk and running quietly; and compatibility with Woxcker JL7 and JL5 and with modules from eight other laser engraver brands.

Woxcker brings the nozzle

Pump and nozzle together. The SCULPFUN kit here is a nozzle without a pump; the HongKKon and Creality bullets describe pumps without mentioning a nozzle. Woxcker lists both, plus the connector and tools, and the product photograph shows a coiled tube as well.

Woxcker’s missing numbers

Airflow is given as 0–30 L/min; pressure, noise and power are described only in words. The fourth bullet’s mention of fire risk is Woxcker’s claim.

Availability

At the last look-up, the German, French, Italian and Spanish Amazon stores were asking 110 € to 140 €.

It is sold in the American and British Amazon stores as well, in their own currency, which the euro figures above leave out on purpose.

Every figure here is Keepa’s reading on the date this page was last updated. Stock and prices can change at any time.

Prices quoted in this text were read on 15 September 2026. The live price is at the top of the page.

More laser air assist

  • SCULPFUN nozzle with brass elbow, red acrylic shield, blue air tube, three green O-rings, screws, hex keys and a black band

    SCULPFUN S9 air assist nozzle kit with tube and sealing ring, pump not included

    An official all-metal air assist nozzle from SCULPFUN for S9 and S6 Pro laser modules with the conical shroud, made after October 2021, supplied with an air tube, sealing ring and fittings but no air pump.

    Airflow
    Absent from the listing
    Pressure
    Absent from the listing
    Nozzle fit
    SCULPFUN S9 and S6 Pro modules with the conical shroud, from October 2021; earlier machines not suitable, first and second bullets
    Flow control
    Absent from the listing
    Noise
    Absent from the listing
    Tubing
    Air tube, sealing ring and installation parts included, fifth bullet; the product photograph shows a blue tube, three green O-rings, a red acrylic shield, four screws and two hex keys
    Power supply
    Absent from the listing — no pump included, third and fifth bullets
    Amazon reference
    B0B69D875D (same reference on 6 Amazon marketplaces)
    EAN
    9039089732817
    • A plain cut-off: S9 and S6 Pro modules from October 2021
    • A sealing ring that keeps pump air in and dust off the lens
    • Air pump not included

    Best for: A SCULPFUN S9 or S6 Pro owner with a post-October 2021 module and an air pump already on the bench.

    ≈ $40 / £36 / 35 €
    Check price on Amazon
  • Silver cylindrical ATOMSTACK pump with a knob, black tube, steel bracket with blue shield and three cone nozzles

    ATOMSTACK Air assist set 10–30 L/min with 2 m tube, for short-glass A10 Pro, X7 Pro, S10 Pro heads

    An air assist set from ATOMSTACK with adjustable 10–30 L/min airflow, 60 dB, a 2 m tube and a quick-release nozzle for A5, A10 Pro, X7 and S10 series engravers, limited to the original short-glass laser head.

    Airflow
    10–30 L/min adjustable, title and first bullet
    Pressure
    Absent from the listing
    Nozzle fit
    A10 Pro, A5 M50 Pro, A5 M50, A5 M40, A5 Pro, A5, X7, X7 Pro, S10 and S10 Pro, original short-glass laser head only; not long-glass models, first and fifth bullets
    Flow control
    Adjustable 10–30 L/min, first bullet
    Noise
    60 dB, third bullet
    Tubing
    2 m tube, title and fourth bullet
    Power supply
    Absent from the listing
    Amazon reference
    B09V361ZC4 (same reference on 5 Amazon marketplaces)
    EAN
    0860013771249
    • A noise figure: 60 dB
    • A 2 m tube for the moving head
    • Not for long-glass laser heads

    Best for: An ATOMSTACK A5, A10 Pro, X7 or S10 owner with the original short-glass head.

    ≈ 110 €
    Check price on Amazon
  • Creality air pump on a mains cable with inline dial and European plug, with a nozzle, bracket, O-ring, tubes and cable ties

    Creality Air assist pump 6 gal/min with adjustment knob, for Creality laser engravers

    Creality’s air assist pump for its laser engravers, named for the CR-Laser Falcon 10W and most Creality engravers except the Laser 5W, with 6 gal/min of airflow, an adjustment knob and silicone feet, and noise stated at no more than 45 dB.

    Airflow
    6 gal/min, title and first bullet
    Pressure
    Absent from the listing
    Nozzle fit
    CR-Laser Falcon 10W in the title; most Creality laser engravers except the Laser 5W, fourth bullet
    Flow control
    Adjustment knob for different air strengths, fourth bullet
    Noise
    No more than 45 dB stated, with soft silicone feet, third bullet
    Tubing
    Absent from the listing text — the product photograph shows short white tube pieces and a nozzle with a copper elbow
    Power supply
    Absent from the listing text — the product photograph shows a mains cable with a European plug and an inline dial
    Amazon reference
    B0CS6HCKK5 (same reference on 5 Amazon marketplaces)
    EAN
    0198549004792
    • A noise ceiling stated: 45 dB
    • An adjustment knob for the airflow
    • Not for the Creality Laser 5W

    Best for: A Creality CR-Laser Falcon owner adding air assist from the same maker.

    ≈ 76 €
    Check price on Amazon

Elsewhere on the workbench

  • Fanned plywood sheets printed A3 3mm 12PACKS, with a wooden ship, train and car

    Pavlleen Basswood plywood 3 mm, A3 420 × 300 mm, 12 sheets

    Twelve A3 sheets of 3 mm basswood plywood from Pavlleen, 420 × 300 mm, with a polished, even-coloured surface and clean edges, for laser engraving and cutting and for scroll and band saws.

    Thickness
    3 mm, title
    Sheet size
    420 × 300 mm (A3), title
    Species
    Basswood (linden), first bullet
    Glue type
    Absent from the listing
    Flatness
    Absent from the listing
    Grade
    Absent from the listing
    Quantity
    12 sheets, title
    Amazon reference
    B0DPHGWG4M (same reference on 5 Amazon marketplaces)
    EAN
    0744915850243
    • A3 sheets in basswood
    • Laser engraving and cutting named
    • No tolerance, glue or grade

    Best for: A laser user with a bed large enough for A3 who wants basswood rather than an unnamed species.

    ≈ 26 €
    Check price on Amazon
  • Fanned plywood sheets printed A4 3mm 10PCS 300 × 210mm, with a wooden globe, truck and motorbike

    VIBINHO Plywood 3 mm, A4 300 × 210 mm, 10 sheets, ±0.2 mm

    Ten A4 plywood sheets from VIBINHO, 300 × 210 × 3 mm with a length and width tolerance of ±0.2 mm, in natural wood with no species named, for laser cutting and engraving, painting and model making.

    Thickness
    3 mm, title and second bullet
    Sheet size
    300 × 210 mm, length and width tolerance ±0.2 mm, second bullet
    Species
    Absent from the listing — “natural wood”, first bullet
    Glue type
    Absent from the listing
    Flatness
    Absent from the listing
    Grade
    Absent from the listing
    Quantity
    10 sheets, title and second bullet
    Amazon reference
    B0FDGS7X36 (same reference on 6 Amazon marketplaces)
    EAN
    0787439427690
    • A length and width tolerance given: ±0.2 mm
    • Laser cutting and engraving named
    • Wood species not named

    Best for: A laser user fitting parts edge to edge who wants sheet dimensions held to a stated tolerance.

    ≈ 13 €
    Check price on Amazon
  • Stack of plain plywood sheets, the front one printed A4 3mm 10pcs

    WISYOK Basswood plywood 3 mm, A4 300 × 210 mm, 10 sheets

    Ten A4 sheets of 3 mm basswood plywood from WISYOK with a medium glue layer, 300 × 210 mm with a size tolerance stated as within 5 %, for knives, circular saws and laser cutting, with a reminder to follow the machine’s manual.

    Thickness
    3 mm, title and second bullet
    Sheet size
    300 × 210 mm, size tolerance within 5 %, second bullet
    Species
    Basswood (linden), first bullet
    Glue type
    Medium glue layer, first bullet; adhesive type not named
    Flatness
    Absent from the listing
    Grade
    Absent from the listing
    Quantity
    10 sheets, title
    Amazon reference
    B0CWN15BD4 (same reference on 6 Amazon marketplaces)
    EAN
    0797424908080
    • Basswood named
    • Laser cutting and engraving named, with a pointer to the machine manual
    • 5 % of a 300 mm edge is 15 mm

    Best for: A laser user cutting parts well inside the sheet, where the edge dimension does not matter.

    ≈ £14 / 16 €
    Check price on Amazon

All laser air assist