Current limiting protects the circuit, and the ripple figure tells the rest · review
Jesverty SPS-3010V, 32 V 10 A, coarse and fine encoders review
A 32 V, 10 A bench supply with coarse and fine encoder knobs setting to 0.01 V and 0.001 A, an output on/off button, overcurrent protection and two 20 W USB charging ports.
The bottom line A practical supply for a mixed bench: 10 A, quick coarse-and-fine setting, output switching and two charging ports. It names only overcurrent protection, and its OPN mode is a convenience that needs care.
The SPS-3010V listing, bullet by bullet
Six bullets and a note: coarse and fine encoder knobs replacing potentiometers, with a setting resolution of 0.01 V and 0.001 A; USB-A and USB-C charging at 20 W each; an output on/off button; a selectable 115/230 V input, OCP, a temperature-controlled fan and an OPN output setting explained in a note; a compact 18 × 9.1 × 15.7 cm, 1.1 kg case; and a box with the supply, a power cable, test leads and a manual.
Coarse and fine on the Jesverty panel
One knob for whole volts, one for the decimals. Reaching 12.34 V takes two turns rather than a long spin, which is the everyday advantage of this layout.
OPN, and why it needs attention
Outputting at power-up saves a button press. It also means a load left connected receives power the moment the supply is switched on, so the setting is one to know about before relying on it.
One protection named on the SPS-3010V
Overcurrent protection is listed, and the fourth bullet ends with “and more”. Overvoltage and short-circuit behaviour are not described, and they are worth confirming in the manual.
Availability
At the last look-up, the German, French, Italian and Spanish Amazon stores were asking 54 € to 70 €.
It is sold in the American and British Amazon stores as well, in their own currency, which the euro figures above leave out on purpose.
Every figure here is Keepa’s reading on the date this page was last updated. Stock and prices can change at any time.
Prices quoted in this text were read on 15 September 2026. The live price is at the top of the page.
Where it earns its place, and where it falls short
Strengths
Coarse and fine encoder knobs: whole volts on one, decimals on the other
Up to 10 A, with an output on/off button
USB-A and USB-C ports at 20 W each, and a selectable 115/230 V input
Compromises
OCP is the only protection named
No ripple figure or design type
The OPN mode outputs at power-up, which the user must remember is enabled
Specifications
Voltage and current range
32 V, 10 A, title
Channels
Absent from the listing
Linear or switching design
Absent from the listing
Ripple
Absent from the listing
Display resolution
Setting resolution 0.01 V and 0.001 A, first bullet
Programmability
Absent from the listing — an OPN setting outputs at power-up without pressing OUTPUT, fourth bullet
Protections
OCP overcurrent protection and a temperature-controlled fan, fourth bullet
Amazon reference
B0DDPVDWPZ (same reference on 6 Amazon marketplaces)
EAN
0680306177134
Questions makers ask before buying
What is OPN on the Jesverty SPS-3010V?
The note under the fourth bullet says OPN makes the supply output voltage and current after switching on, without pressing the OUTPUT button.
How do the two knobs of the SPS-3010V work?
The first bullet says the coarse knob sets the value before the decimal point and the fine knob the decimals, with a setting resolution of 0.01 V and 0.001 A.
0–30 V, 0–10 A · 4-digit LED for voltage, current and power · keypad lock · output switch · protection against overcurrent, overheating and overvoltage · ground terminal · fan
A 0–30 V, 0–10 A bench supply with four-digit displays for voltage, current and calculated power, a lockable keypad and a front output switch, protected against overcurrent, overheating and overvoltage.
Best for: A general electronics bench up to 30 V and 10 A that wants settings locked between sessions.
0–30 V, 0–10 A · programmable over USB from a PC · 4 memory presets · user-set OVP and OCP · 2.8 in TFT, numeric or curve display · 5 V 1 A USB port · 200–240 V input
A programmable 0–30 V, 0–10 A bench supply controlled from a computer over USB, with four memory presets, user-set overvoltage and overcurrent limits, and a 2.8-inch screen that shows readings as numbers or curves.
Best for: Logging or automating power tests from a computer, such as battery charging runs, at up to 30 V and 10 A.
0–30 V, 0–5 A · 4-digit LED, 0.01 V and 0.001 A · CC/CV switching · output button · OVP, OCP, SCP · short-circuit alarm · 18 W USB fast charging · 1.1 kg
A 0–30 V, 0–5 A bench supply with a four-digit display showing voltage, current and power, automatic CC/CV switching, an output button and a short-circuit alarm, plus an 18 W USB charging port.
Best for: Electronics hobby work up to 30 V and 5 A, where a short-circuit alarm protects the circuit under test.
