The heating element fits a mug shape, and the shape is on the label · review
A 500 W mug press with six interchangeable heating elements from 8 to 30 oz for cylindrical and conical mugs, a digital display that remembers temperature and time, and no published range for either.
The bottom line A versatile set of six elements with a memory function, described in terms of what it holds rather than what it reaches. The missing temperature and time ranges are the specifications to request.
Five bullets: six element sizes, 8, 11, 12, 17, 20 and 30 oz; 500 W with silicon-aluminium wire heating for fast, even warming; a digital display with buttons and a memory function for temperature and time; personalised gifts for birthdays and holidays; and an iron build with a silicone pad clad in stainless steel, packed in protective foam.
One element per size, and conical mugs named in the title. Tapered mugs need a tapered element to press evenly, and a set that covers both shapes spares buying a second machine.
The display sets temperature and time and remembers them. What limits it allows is never written, so a buyer cannot check the press against the settings their blanks call for.
The Futchoy mug press on this site lists the same six sizes and the same heating technique at 600 W. This page reports the match and draws no conclusion about who makes either machine.
At the last look-up, the German, Italian and Spanish Amazon stores were asking 209 € to 232 €.
The French Amazon catalogue lists the product, yet no seller was offering it.
The American and British Amazon stores returned no entry, so the buy button there opens a search rather than a missing page.
Every figure here is Keepa’s reading on the date this page was last updated. Stock and prices can change at any time.
Prices quoted in this text were read on 15 September 2026. The live price is at the top of the page.
| Sizes | 8, 11, 12, 17, 20 and 30 oz, first bullet and title |
|---|---|
| Shapes accepted | Cylindrical and conical mugs, title |
| Elements supplied | Six interchangeable heating elements, one per size, first bullet |
| Temperature | Absent from the listing — set on a digital display, with no range given |
| Timer | Absent from the listing as a range — time is set on the display and stored by a memory function, third bullet |
| Pressure adjustment | Absent from the listing |
| Automatic release | Absent from the listing |
| Amazon reference | B0GN2YR4YT (same reference on 4 Amazon marketplaces) |
| EAN | 0756722130241 |
The first bullet lists six heating elements for 8, 11, 12, 17, 20 and 30 oz mugs, and the title names cylindrical and conical shapes.
The listing does not say. It describes a digital display and a memory function for temperature and time, without a range.
6 pads: 8, 11, 12, 17 conical, 20 and 30 oz · 0–200 °C · 0–999 s · timer starts when the handle closes · pressure and diameter knobs · fuses · 600 W
A 600 W mug press with six heating pads from 8 to 30 oz, including a 17 oz conical pad, a 0–200 °C range, a timer that starts when the handle is pulled down, and knobs for pressure and diameter.
Best for: A small business pressing mixed mug sizes with consistent timing across a batch.
≈ 220 €
325–887 ml (11–30 oz) · 74–87 mm diameter, up to 270 mm tall · 0–220 °C · 0–999 s · NTC sensor, 1 minute preheat · tape and gloves included
A single mug press for 325 to 887 ml mugs from 74 to 87 mm across and up to 270 mm tall, with a 0–220 °C range, a 0–999 second timer and an NTC sensor the listing says preheats in a minute.
Best for: Pressing straight-sided mugs and tumblers at home or in small batches, within the stated diameters.
≈ $91 / 90 €
Low-temperature PCL, 1.75 mm · 2 speeds and 2 temperature levels · cordless, USB-C charging · TouchSafe design · 37 m of PCL in 12 colours included
A cordless 3D pen for children that draws with low-temperature PCL filament, with two speeds and two temperature levels, and a maker’s note that it is used according to the instructions and under supervision.
Best for: A younger child’s first 3D pen, used with an adult nearby, where a low-temperature filament is the point.
≈ 45 €
