The heating element fits a mug shape, and the shape is on the label · review
A single mug press for 325 to 887 ml mugs from 74 to 87 mm across and up to 270 mm tall, with a 0–220 °C range, a 0–999 second timer and an NTC sensor the listing says preheats in a minute.
The bottom line A straightforward mug press that gives the dimensions a buyer needs — capacity, diameter, height — and a full temperature and time range. Pressure, elements and release are the parts it leaves undescribed.
Five bullets: mugs from 325 to 887 ml, 74 to 87 mm across and up to 270 mm tall, in ceramic, stainless steel or glass; an NTC temperature sensor and a preheat of about one minute; 0–220 °C and 0–999 seconds; no installation, with recommended settings in the manual; and uses from gifts at home to small commercial runs.
Capacity alone does not decide whether a mug fits; diameter and height do. This listing gives all three, which lets a buyer check a specific blank before ordering rather than trusting an ounce figure.
The press covers 0 to 220 °C. The listing does not print recommended values but says the manual does, which is where sublimation paper and blank makers’ own figures should be compared.
Pressure is not adjustable according to anything written, the elements are not counted, and nothing releases the mug automatically. For straight-sided mugs in the stated range, those gaps matter less than for tapered tumblers.
At the last look-up, the German, French, Italian and Spanish Amazon stores were asking 90 € to 103 €.
It is sold in the American Amazon store as well, in its own currency, which the euro figures above leave out on purpose.
The British Amazon catalogue lists the product, yet no seller was offering it.
Every figure here is Keepa’s reading on the date this page was last updated. Stock and prices can change at any time.
Prices quoted in this text were read on 15 September 2026. The live price is at the top of the page.
| Sizes | 325–887 ml (11–30 oz), 74–87 mm in diameter and up to 270 mm tall, first bullet |
|---|---|
| Shapes accepted | Absent from the listing as shapes — ceramic, stainless steel and glass mugs are named, first bullet |
| Elements supplied | Absent from the listing |
| Temperature | 0–220 °C (32–428 °F), third bullet |
| Timer | 0–999 seconds, third bullet |
| Pressure adjustment | Absent from the listing |
| Automatic release | Absent from the listing |
| Amazon reference | B0H5ZVM4CT (same reference on 6 Amazon marketplaces) |
| EAN | 0197988926818 |
The first bullet gives 325 to 887 ml, or 11 to 30 oz, with a diameter of 74 to 87 mm and a height of up to 270 mm.
The fourth bullet says the manual gives clear instructions and recommended temperature and time settings; the press itself ranges from 0 to 220 °C and 0 to 999 seconds.
6 pads: 8, 11, 12, 17 conical, 20 and 30 oz · 0–200 °C · 0–999 s · timer starts when the handle closes · pressure and diameter knobs · fuses · 600 W
A 600 W mug press with six heating pads from 8 to 30 oz, including a 17 oz conical pad, a 0–200 °C range, a timer that starts when the handle is pulled down, and knobs for pressure and diameter.
Best for: A small business pressing mixed mug sizes with consistent timing across a batch.
≈ 220 €
6 interchangeable elements: 8, 11, 12, 17, 20 and 30 oz · cylindrical and conical mugs · 500 W · silicon-aluminium wire heating · digital display with memory
A 500 W mug press with six interchangeable heating elements from 8 to 30 oz for cylindrical and conical mugs, a digital display that remembers temperature and time, and no published range for either.
Best for: A small gift business pressing several mug sizes and shapes, with the same settings repeated across a batch.
≈ 209 €
Low-temperature PCL, 1.75 mm · 2 speeds and 2 temperature levels · cordless, USB-C charging · TouchSafe design · 37 m of PCL in 12 colours included
A cordless 3D pen for children that draws with low-temperature PCL filament, with two speeds and two temperature levels, and a maker’s note that it is used according to the instructions and under supervision.
Best for: A younger child’s first 3D pen, used with an adult nearby, where a low-temperature filament is the point.
≈ 45 €
