Every colour change costs filament, and the purge is part of the print · review
Flashforge Creator 5 Pro, four toolheads review
A four-toolhead multi-material printer with an active heated chamber up to 65 °C and dual HEPA and carbon filters, whose listing claims colour changes without purge waste and publishes no build volume.
The bottom line For multi-material work the listing publishes the parts that decide results: four real toolheads, a heated chamber with a temperature, and named filters. It omits the build volume and quantifies its waste claim only as a percentage without a baseline.
The Creator 5 Pro listing, bullet by bullet
Five bullets: true multicolour and multi-material printing with four independent toolheads; up to 500 % faster multicolour printing thanks to zero-purge-waste technology; high speed up to 600 mm/s with fully automatic calibration and levelling; an active heated chamber reaching 65 °C to prevent warping in ABS and nylon; and advanced air filtration with dual HEPA and carbon filters.
Four toolheads, and why that changes waste
A toolhead printer does not purge between colours the way a single nozzle does. Each head keeps its own filament, so the change is a head swap rather than a flush. The listing turns that into a 500 % speed claim without saying what it is compared with; this page keeps the mechanism and leaves the percentage as the maker’s.
A chamber with a number
65 °C is published, and it is the figure that makes ABS and nylon realistic. Filtration is named by type — HEPA and carbon — which describes what the maker fitted, not the quality of the room’s air.
The size question
No build volume appears. For a printer at this price, that is the first figure to confirm with the maker before ordering.
Availability
At the last look-up, the German, French, Italian and Spanish Amazon stores were asking roughly 899 €.
It is sold in the British Amazon store as well, in its own currency, which the euro figures above leave out on purpose.
The American Amazon catalogue lists the product, yet no seller was offering it.
Every figure here is Keepa’s reading on the date this page was last updated. Stock and prices can change at any time.
Prices quoted in this text were read on 15 September 2026. The live price is at the top of the page.
Where it earns its place, and where it falls short
Strengths
Independent toolheads avoid the purge tower that single-nozzle colour systems need, as the second bullet describes
An actively heated chamber up to 65 °C for ABS and nylon, a published temperature
Dual HEPA and carbon filtration, named rather than implied
Compromises
No build volume published
The 500 % faster figure has no stated baseline or method
No material list beyond ABS and nylon
Specifications
Filaments loaded
Four, one per independent toolhead, first bullet
Switching method
Independent tool heads rather than a single nozzle fed by a switching unit
Purge handling
Zero-purge-waste technology, claimed in the second bullet as up to 500 % faster multicolour printing; no method of measurement given
Build volume
Absent from the listing
Enclosure
Active heated chamber up to 65 °C, fourth bullet
Material limits
ABS and nylon named as advanced engineering materials the heated chamber serves; no full material list
Whether the feeder is included
No separate feeder is described; the four toolheads are part of the machine
Amazon reference
B0GXVR452T (same reference on 6 Amazon marketplaces)
EAN
6937120332091
Questions makers ask before buying
Why does a toolhead printer waste less filament?
A single-nozzle system has to flush the old colour out before printing the new one, which produces purge waste. Independent toolheads each hold one material, so the maker claims little or no purge; the listing gives no measured figure.
Do the filters make enclosed printing of ABS indoors unproblematic?
They are described as blocking fine particles and odours. This page reports the filter types and does not describe the air as safe; the filament maker’s ventilation guidance still applies.
Up to 5 independent toolheads · CoreXY · segmented heated bed · factory assembled · satin sheet and 1 kg Prusament PLA included · no build volume published
A large-format CoreXY printer with up to five independent toolheads and a segmented heated bed, delivered factory assembled with a satin sheet and a kilogram of Prusament PLA.
Best for: A studio or small business printing large multi-material prototypes that can plan around the maker’s published documentation.
Low-temperature PCL, 1.75 mm · 2 speeds and 2 temperature levels · cordless, USB-C charging · TouchSafe design · 37 m of PCL in 12 colours included
A cordless 3D pen for children that draws with low-temperature PCL filament, with two speeds and two temperature levels, and a maker’s note that it is used according to the instructions and under supervision.
Best for: A younger child’s first 3D pen, used with an adult nearby, where a low-temperature filament is the point.
Cool-touch design, no external hot parts · one button · reverse function · cordless, USB-C charging · 72 filament strands · ages 6 to 13
A cordless 3D pen for children aged 6 to 13 with a cool-touch design and no external hot parts, sold with 72 filament strands and a guide of ten projects, whose listing names neither the filament material nor a temperature.
Best for: A child from six making simple projects from a guided activity book, with refills bought from the same maker.
