Hot or cold nozzle, and which filament it takes, before any colour count · review
3Doodler Start+ Essentials children’s pen review
A cordless 3D pen for children aged 6 to 13 with a cool-touch design and no external hot parts, sold with 72 filament strands and a guide of ten projects, whose listing names neither the filament material nor a temperature.
The bottom line A pen described entirely in terms of the child using it — age range, one button, cool touch, guided projects — and not at all in terms of what it extrudes. That suits a gift; it makes refills and comparison harder.
The Start+ Essentials listing, bullet by bullet
Five bullets: a pen designed for children’s safety with a cool-touch design and no external hot parts; an improved design, more comfortable to hold, faster to start, with longer battery life, a reverse function and a removable hatch for changing colours; a screen-free learning tool for STEM concepts; one-button cordless operation for children aged 6 to 13; and a complete set with the pen, 72 coloured filament strands, an activity guide with ten step-by-step projects and a USB-C cable, with a two-year warranty and lifetime support.
A children’s pen described by its surface
No external hot parts is the claim the listing leads with. For a six-year-old that is the question a parent asks first. The page reports it as described and leaves the instructions to decide how the pen is used.
The filament question
72 strands are included, and nothing says what they are made of or how thick they are. Refills are therefore a matter of buying the maker’s own, since no generic filament is named as a match.
What the box teaches
Ten guided projects make a first session straightforward. The absence of a speed control keeps the pen simple, at the cost of the fine and fast modes older users find useful.
Availability
At the last look-up, the German, French, Italian and Spanish Amazon stores were asking roughly 50 €.
It is sold in the American and British Amazon stores as well, in their own currency, which the euro figures above leave out on purpose.
Every figure here is Keepa’s reading on the date this page was last updated. Stock and prices can change at any time.
Prices quoted in this text were read on 15 September 2026. The live price is at the top of the page.
Where it earns its place, and where it falls short
Strengths
A cool-touch design with no external hot parts, the listing’s central claim for a children’s pen
A reverse function and a removable hatch for changing filament colours
Two-year warranty and lifetime product support, as the maker states
Compromises
No filament material or diameter, so refills can only be bought by brand
No temperature, nozzle or weight information
Single-button operation with no stated speed control
Specifications
Nozzle type
Absent from the listing — a cool-touch design with no external hot parts is described
Temperature
Absent from the listing
Filament accepted
72 coloured filament strands included; the material and diameter are not stated
Speed control
Absent from the listing — one-button operation is described
Power source
Cordless, charged over USB-C, with a longer battery life than the previous version stated
Weight
Absent from the listing
Published safety features
Cool-touch design with no external hot parts, first bullet
Amazon reference
B086JQQHPK (same reference on 6 Amazon marketplaces)
EAN
0817005023657
Questions makers ask before buying
Which filament does it use?
The listing includes 72 coloured strands but does not name the material or diameter. Refills should be matched to the maker’s own range rather than to a generic filament.
What does cool-touch mean here?
The first bullet describes a design with no external hot parts. The page reports it as the maker describes it; the instructions decide how a child should use the pen.
Low-temperature PCL, 1.75 mm · 2 speeds and 2 temperature levels · cordless, USB-C charging · TouchSafe design · 37 m of PCL in 12 colours included
A cordless 3D pen for children that draws with low-temperature PCL filament, with two speeds and two temperature levels, and a maker’s note that it is used according to the instructions and under supervision.
Best for: A younger child’s first 3D pen, used with an adult nearby, where a low-temperature filament is the point.
1.75 mm ABS and PLA · stepless speed slider · ultrasonically sealed nozzle · mains adapter · three PLA colours included
A slim 1.75 mm pen for ABS and PLA with a stepless speed slider and an ultrasonically sealed nozzle, described in five short bullets that give no temperature and no safety provision.
Best for: An adult artist or engineer who wants a simple pen for ordinary 1.75 mm PLA and ABS refills.
Ceramic tip · adjustable temperature, PLA 160–210 °C and ABS 210–235 °C · stepless speed · 2–3 min heat-up · auto standby after 2 min · mains adapter
A mains-powered 3D pen with a display, a ceramic tip and adjustable temperature, whose listing publishes the ranges for PLA and ABS and an automatic standby after two minutes idle.
Best for: An older child or adult who wants to draw with PLA and ABS at published temperatures, including small repairs.
