Speed range and collet size decide which accessories are worth buying · review
A 200 W corded rotary tool with six speeds from 8,000 to 35,000 rpm, a three-jaw chuck taking shanks from 1/64 to 1/8 inch, a flexible extension shaft and 135 accessories in a carry case.
The bottom line A generously equipped kit with a published shank range, which only the Fanttik among the other rotary tools here also gives. The accessory count is large and undescribed, and the efficiency claim is marketing.
Five bullets: a 200 W motor from 8,000 to 35,000 rpm in six speeds, with a claimed 30 % efficiency gain; a three-jaw universal chuck for shanks from 1/64 to 1/8 inch, compatible with other brands’ accessories; a flexible extension shaft; 135 accessories in a shock- and moisture-resistant case, with a clear guard against sparks; and an ergonomic body with large vents.
One chuck, every shank from 1/64 to 1/8 inch. Collet systems need a different collet for each shank size. A three-jaw chuck closes on anything in its range, which is faster when switching between bits of different makes.
135 pieces fill a case. The listing counts them and does not say what they are, which makes the number hard to value against a kit with fewer, named parts.
The first bullet promises 30 % more efficiency without saying compared with what. The page reports it as the maker’s claim and bases nothing on it.
At the last look-up, the German, French, Italian and Spanish Amazon stores were asking 30 € to 36 €.
It is sold in the American Amazon store as well, in its own currency, which the euro figures above leave out on purpose.
The British Amazon catalogue lists the product, yet no seller was offering it.
Every figure here is Keepa’s reading on the date this page was last updated. Stock and prices can change at any time.
Prices quoted in this text were read on 15 September 2026. The live price is at the top of the page.
| Speed range | 8,000–35,000 rpm in 6 speeds, first bullet |
|---|---|
| Power or battery | 200 W motor, title and first bullet |
| Collet sizes | 3-jaw universal chuck for shanks from 1/64 in to 1/8 in, second bullet |
| Accessory types | 135 accessories, fourth bullet; types not listed |
| Flexible shaft | Flexible extension shaft included, third bullet |
| Attachment compatibility | Described as compatible with other brands’ rotary tool accessories, second bullet |
| Amazon reference | B0D83BMJQL (same reference on 6 Amazon marketplaces) |
| EAN | 0768657033115 |
The second bullet says the three-jaw universal chuck accepts accessories with shanks from 1/64 inch to 1/8 inch.
Yes. The third bullet describes a flexible extension shaft for reaching awkward pipes, joints and corners.
Cordless, 380 mAh battery · 3 speeds: 5,000, 10,000 and 15,000 rpm · copper collets · for small, light projects only
A small cordless rotary tool on a 380 mAh battery with three speeds up to 15,000 rpm and copper collets, which its maker restricts, in capitals, to small and light projects.
Best for: Light engraving, polishing and sanding on crafts, where a cord would be the main nuisance.
≈ 16 €
130 W · 10,000–33,000 rpm no-load, variable · 1 attachment and 25 accessories · EZ Twist nose cap · works with Dremel accessories and attachments
The Dremel 3000 rotary tool at 130 W with a variable no-load speed from 10,000 to 33,000 rpm, an EZ Twist nose cap, one attachment and 25 accessories, compatible with Dremel’s range of accessories and attachments.
Best for: A maker who wants to build on a large attachment ecosystem over time rather than buy a big kit now.
≈ 62 €
Cordless engraving pen · 5 speeds · 700 mAh, over 2 h · USB-C charging in about 1 h, cable not included · 3/32 in (2.3 mm) collet · 20 engraving bits · 32 dB · LED work light · 0.10 kg
A pen-shaped cordless engraver weighing 0.10 kg with five speeds, a 3/32-inch collet, 20 engraving bits, an LED work light and a 700 mAh battery the listing rates for over two hours.
Best for: Fine engraving and detail work on wood, glass and metal, held like a pen.
≈ $76 / 60 €
