Speed range and collet size decide which accessories are worth buying · review
The Dremel 3000 rotary tool at 130 W with a variable no-load speed from 10,000 to 33,000 rpm, an EZ Twist nose cap, one attachment and 25 accessories, compatible with Dremel’s range of accessories and attachments.
The bottom line A small kit on a tool tied to a large ecosystem, with its speed correctly stated as no-load. The listing names no collet sizes and describes none of the attachments its photograph shows, and it costs the most of the six.
Four bullets: lower vibration and noise at up to 33,000 rpm under heavy load, with motor-cooled, ventilated housing; ergonomic handling and the EZ Twist nose cap; use with a wide range of Dremel accessories and attachments, for woodwork or engraving; and a no-load speed of 10,000 to 33,000 rpm at 130 W.
“Leerlaufdrehzahl” — no-load speed. Every rotary tool slows under load, and the other listings here give their rpm without saying so. Dremel labels its figure for what it is.
25 accessories and one attachment is a small kit beside the 120 to 173 pieces of the cheaper tools. The argument the listing makes is compatibility: attachments for the tool can be added as projects need them.
Collet sizes, and which attachment the title counts: the photograph shows a flexible shaft, a blue attachment and a carry case that the text never describes. For a tool sold on its accessory range, the collet is the specification that decides what fits.
At the last look-up, the German, French, Italian and Spanish Amazon stores were asking 62 € to 92 €.
The American Amazon catalogue lists the product, yet no seller was offering it.
The British Amazon store returned no entry, so the buy button there opens a search rather than a missing page.
Every figure here is Keepa’s reading on the date this page was last updated. Stock and prices can change at any time.
Prices quoted in this text were read on 15 September 2026. The live price is at the top of the page.
| Speed range | 10,000–33,000 rpm no-load speed, variable, title and fourth bullet |
|---|---|
| Power or battery | 130 W, title and fourth bullet |
| Collet sizes | Absent from the listing |
| Accessory types | 25 accessories and 1 attachment, title; types not listed |
| Flexible shaft | Absent from the listing text — the product photograph shows a flexible shaft |
| Attachment compatibility | Dremel accessories and attachments, third bullet |
| Amazon reference | B014UXZHGY (same reference on 5 Amazon marketplaces) |
| EAN | 8710364074686 |
The fourth bullet gives a no-load speed of 10,000 to 33,000 rpm, variable, at 130 W.
The third bullet says it can be used with a wide range of Dremel accessories and attachments.
Cordless, 380 mAh battery · 3 speeds: 5,000, 10,000 and 15,000 rpm · copper collets · for small, light projects only
A small cordless rotary tool on a 380 mAh battery with three speeds up to 15,000 rpm and copper collets, which its maker restricts, in capitals, to small and light projects.
Best for: Light engraving, polishing and sanding on crafts, where a cord would be the main nuisance.
≈ 16 €
200 W · 8,000–35,000 rpm, 6 speeds · 3-jaw universal chuck for 1/64 to 1/8 in shanks · flexible extension shaft · 135 accessories · carry case and clear guard
A 200 W corded rotary tool with six speeds from 8,000 to 35,000 rpm, a three-jaw chuck taking shanks from 1/64 to 1/8 inch, a flexible extension shaft and 135 accessories in a carry case.
Best for: A general-purpose kit for carving, sanding and cutting, using accessories bought from other brands.
≈ $40 / 30 €
Cordless engraving pen · 5 speeds · 700 mAh, over 2 h · USB-C charging in about 1 h, cable not included · 3/32 in (2.3 mm) collet · 20 engraving bits · 32 dB · LED work light · 0.10 kg
A pen-shaped cordless engraver weighing 0.10 kg with five speeds, a 3/32-inch collet, 20 engraving bits, an LED work light and a 700 mAh battery the listing rates for over two hours.
Best for: Fine engraving and detail work on wood, glass and metal, held like a pen.
≈ $76 / 60 €
