Skip to content

A dust and light cover, not a heated enclosure

UniTak3D Blackout cover for small resin printers, 25.5 × 24.5 × 39 cm

A fabric blackout cover for small resin printers, 25.5 × 24.5 × 39 cm, that keeps dust and direct sunlight off the resin, with flaps on all four sides for reaching controls and ports.

UniTak3D black cover over a small resin 3D printer

UniTak3D Blackout cover for small resin printers, 25.5 × 24.5 × 39 cm

A fabric blackout cover for small resin printers, 25.5 × 24.5 × 39 cm, that keeps dust and direct sunlight off the resin, with flaps on all four sides for reaching controls and ports.

Inner dimensions
25.5 × 24.5 × 39 cm, fourth bullet; not stated as inner or outer
Materials
Described as waterproof, dustproof and resistant to tearing and abrasion, third bullet; the material is not named
Ventilation and filtration
Absent from the listing
Doors
Flaps on all four sides for access to the printer’s controls and ports, fifth bullet
Cable ports
Absent from the listing as ports — the flaps give access to connections
Published fire rating
Absent from the listing
Amazon reference
B097D4L3G6 (same reference on 6 Amazon marketplaces)
EAN
0605175680011
  • Keeps dust and direct sunlight off a resin printer, which the second bullet ties to keeping the resin in good condition
  • Flaps on all four sides to reach controls without lifting the cover
  • A cover, not an enclosure: no ventilation, filtration or temperature control

Best for: Covering a small resin printer between prints in a room with daylight.

≈ 7 €
Check price on Amazon

Specifications

Inner dimensions
25.5 × 24.5 × 39 cm, fourth bullet; not stated as inner or outer
Materials
Described as waterproof, dustproof and resistant to tearing and abrasion, third bullet; the material is not named
Ventilation and filtration
Absent from the listing
Doors
Flaps on all four sides for access to the printer’s controls and ports, fifth bullet
Cable ports
Absent from the listing as ports — the flaps give access to connections
Published fire rating
Absent from the listing
Amazon reference
B097D4L3G6 (same reference on 6 Amazon marketplaces)
EAN
0605175680011

The UniTak3D cover listing, bullet by bullet

Five bullets: a cover for the Photon Mono 2, Photon S, Photon Mono SE, Wash and Cure 2.0, Mars 2 Pro, LD-002H, Longer Orange 30 and similar; protection from dust and direct sunlight to keep resin in good condition; a waterproof, dustproof material resistant to tears and abrasion; a size of 25.5 × 24.5 × 39 cm; and flaps on all four sides for reaching controls and ports.

A cover, not a cabinet

Light and dust are what it blocks. UV light cures resin left in a vat, and dust spoils a print; a blackout cover addresses both. It does nothing for fumes or temperature, and the listing does not suggest otherwise.

Measure before ordering

25.5 × 24.5 × 39 cm is given without saying whether it is inside or outside. For a cover that sits close around a small printer, a few centimetres decide the fit.

Availability

At the last look-up, the German, French, Italian and Spanish Amazon stores were asking 7 € to 10 €.

It is sold in the British Amazon store as well, in its own currency, which the euro figures above leave out on purpose.

The American Amazon catalogue lists the product, yet no seller was offering it.

Every figure here is Keepa’s reading on the date this page was last updated. Stock and prices can change at any time.

Prices quoted in this text were read on 15 September 2026. The live price is at the top of the page.

More 3D printer enclosures

  • Creality large 3D printer enclosure with clear window and LED strip

    Creality Large enclosure 700 × 750 × 900 mm with vents, fan ports and LED

    A large Creality enclosure with 700 × 750 × 900 mm inner dimensions, ventilation openings, fan ports and cable exits on both sides, a transparent window, a USB LED strip and a side tool pocket.

    Inner dimensions
    700 × 750 × 900 mm, stated as inner dimensions, first bullet
    Materials
    Described as fireproof in the title; the materials are not named
    Ventilation and filtration
    Ventilation openings and fan ports, fifth bullet; no filter described
    Doors
    Absent from the listing — a large transparent window is described, fourth bullet
    Cable ports
    Cable exits placed symmetrically left and right, fifth bullet
    Published fire rating
    Absent from the listing — “fireproof” without a classification
    Amazon reference
    B0GCKCGV8P (same reference on 6 Amazon marketplaces)
    EAN
    0198549097992
    • Inner dimensions stated as such: 700 × 750 × 900 mm
    • Ventilation openings, fan ports and cable exits on both sides
    • “Fireproof” claimed without a rating

    Best for: A large bed-slinger such as a CR-10 or Ender 5 Plus that needs room, cable routing and a fan outlet.

    ≈ £60 / 66 €
    Check price on Amazon
  • Flashforge AD5X enclosure kit parts: panels, screws, tools and installation guide

    Flashforge Enclosure kit for the Flashforge AD5X, print-your-own parts

    An enclosure kit for the Flashforge AD5X that supplies acrylic panels and screws, while the frame parts are printed by the owner in PLA from STL files on the Flashforge wiki, to print ABS, ASA and PC.

    Inner dimensions
    Absent from the listing
    Materials
    Acrylic panels and screws supplied; the remaining parts printed in PLA by the owner, first bullet
    Ventilation and filtration
    Absent from the listing
    Doors
    Absent from the listing
    Cable ports
    Absent from the listing
    Published fire rating
    Absent from the listing
    Amazon reference
    B0FP574M41 (same reference on 6 Amazon marketplaces)
    EAN
    6937120359067
    • Made by Flashforge for its own AD5X printer
    • Turns the AD5X into a closed system for ABS, ASA and PC, as the second bullet states
    • Most of the parts must be printed by the owner before assembly

    Best for: An AD5X owner who wants to print engineering filaments and does not mind printing the frame first.

    ≈ $49 / £43 / 49 €
    Check price on Amazon
  • VEVOR 3D printer tent with a clear window and vent

    VEVOR Printer tent 55 × 65 × 75 cm with ventilation and LED

    A 550 × 650 × 750 mm printer tent with a ventilation system that clears smoke and dust after printing, a transparent window, LED lighting and flame-retardant materials, sized for small FDM and resin printers.

    Inner dimensions
    550 × 650 × 750 mm, title and second bullet; not stated as inner or outer
    Materials
    Flame-retardant materials and a stable construction, fourth bullet; described as dustproof and waterproof in the title
    Ventilation and filtration
    A ventilation system that removes smoke and dust after printing, third bullet; no filter described
    Doors
    Absent from the listing — a large transparent window is described, fifth bullet
    Cable ports
    Absent from the listing
    Published fire rating
    Absent from the listing — “flame-retardant materials” without a classification
    Amazon reference
    B0FYWNGS7M (same reference on 6 Amazon marketplaces)
    EAN
    0197988168577
    • A ventilation system for smoke and dust, which most covers here lack
    • Room for small FDM printers and most LCD resin printers
    • Ventilation without a described filter

    Best for: A small resin printer in a room where fumes need to be moved out rather than contained.

    ≈ $42 / 48 €
    Check price on Amazon

Elsewhere on the workbench

  • Clear acrylic panels of increasing size standing in a slotted orange base, with a Made in Germany stamp

    EH Design Clear acrylic sheet 20 × 20 cm, 3 mm, laser-polished edges, cut to order

    A clear 3 mm acrylic sheet from EH Design, 20 × 20 cm, cut to size with laser-polished edges, UV-protected and stated to stay free of yellowing for up to 30 years, made in Germany.

    Cast or extruded
    Absent from the listing
    Thickness and tolerance
    3 mm, title; cut “to the millimetre”, second bullet; no tolerance figure
    Sheet size
    20 × 20 cm, cut to order, title and second bullet
    Colour and transparency
    Clear and transparent, first bullet
    Film
    Absent from the listing
    Laser suitability
    Edges laser-polished by the seller, second bullet; engraving not described
    Amazon reference
    B07QHX8KFF (same reference on 5 Amazon marketplaces)
    EAN
    4251393305081
    • Laser-polished edges, no finishing needed
    • UV protection with a stated 30-year yellowing figure
    • Cast or extruded not stated

    Best for: A maker needing a small clear panel with finished edges, ready to fit.

    ≈ 9 €
    Check price on Amazon
  • Tool set laid out: sanding sticks, tweezers, needles in a tube, five files, a clear box, cloth, plastic and steel scrapers, flush cutter, brushes and a hobby knife

    SIMDAO 31-piece 3D printer tool set: scrapers, deburrer, files, needles and brushes

    A 31-piece tool set from SIMDAO for FDM and resin prints, with a stainless steel and a yellow plastic scraper, a deburrer, straight and bent tweezers, five needle files, two sanding sticks, ten cleaning needles of 0.4 and 0.35 mm, three brushes, a cloth and a handle with five tools.

    Itemised contents
    Stainless steel scraper, yellow plastic scraper, a tool, straight and bent tweezers, 5 needle files, 2 sanding sticks, 10 cleaning needles, 1 cleaning cloth, 3 cleaning brushes and a tool with 5 tools, first bullet
    Removal and deburring tools
    Deburrer, stainless steel scraper and yellow plastic scraper, first and second bullets
    Nozzle needles
    10 cleaning needles of 0.4 mm and 0.35 mm, first bullet
    Cutters
    Absent from the contents list — “Cutter” and carving tools appear in the title; the product photograph shows a blue flush cutter and a hobby knife with a pack of blades
    Blade storage
    Absent from the listing text — the product photograph shows the knife blades in a small pack
    Case
    Absent from the listing text — the product photograph shows a clear plastic box
    Amazon reference
    B0GK133WJ7 (same reference on 6 Amazon marketplaces)
    EAN
    0781962576863
    • A plastic scraper as well as a steel one, for delicate print surfaces
    • Nozzle needles in two sizes: 0.4 and 0.35 mm
    • Box, flush cutter and knife appear in the photograph, not in the contents list

    Best for: A new FDM or resin printer owner who wants removal, finishing and nozzle cleaning tools in one purchase.

    ≈ 12 €
    Check price on Amazon
  • Kit laid out: clear box, six files, two brushes, two long-nose pliers, flush cutter, scraper, four hex keys, needles in a tube, ten blades and a blue deburrer

    VASTOOLS 31-piece 3D printer finishing kit: deburrer, 10 blades, knife, wire cutter, files

    A 31-piece finishing kit from VASTOOLS for 3D prints and resin, with a deburrer and 10 extra blades, a craft knife, a wire cutter, a needle file set, sanding sticks, sandpaper, a nylon brush and a polishing pad, all in a storage box.

    Itemised contents
    Deburrer + 10 extra blades, nylon brush, craft knife, wire cutter, needle file set, sanding sticks and polishing pad, 31 tools, third bullet; sandpaper, first bullet
    Removal and deburring tools
    Deburring tool with 10 extra blades and a craft knife, third bullet
    Nozzle needles
    Absent from the listing text — the product photograph shows cleaning needles in a tube
    Cutters
    Wire cutter, third bullet; the product photograph shows a yellow flush cutter and two long-nose pliers
    Blade storage
    Absent from the listing
    Case
    Storage box holding all accessories, fifth bullet
    Amazon reference
    B0DZSY2C92 (same reference on 5 Amazon marketplaces)
    EAN
    0691303450052
    • Deburrer, knife, wire cutter and files in one kit
    • Sanding sticks and a polishing pad for finishing
    • Needles, pliers, hex keys and a scraper appear only in the photograph

    Best for: A resin or FDM printer owner who wants finishing tools in one box and can confirm the photographed extras on arrival.

    ≈ 21 €
    Check price on Amazon

All 3D printer enclosures