Skip to content

The 900M standard, ten deep

Saipor 900M-T-B conical tips for 936-type stations, 10 pieces

Ten 900M-T-B conical soldering tips from Saipor in nickel-plated oxygen-free copper, lead-free, for 900M-standard irons on Hakko, ATTEN, QUICK, Aoyue and 936-type stations, for small SMD work on crowded boards.

Ten silver conical soldering tips lined up diagonally

Saipor 900M-T-B conical tips for 936-type stations, 10 pieces

Ten 900M-T-B conical soldering tips from Saipor in nickel-plated oxygen-free copper, lead-free, for 900M-standard irons on Hakko, ATTEN, QUICK, Aoyue and 936-type stations, for small SMD work on crowded boards.

Iron fit
900M tips for Hakko, Radio Shack 64-053, FEITA, ATTEN, QUICK, Aoyue and 936, 852D+, 858D and 8586 stations, fourth bullet
Cartridge or bare tip
Absent from the listing — 900M-type tip, title
Shape
900M-T-B, title and fifth bullet
Size
Absent from the listing
Plating
Nickel-plated oxygen-free copper, first bullet
Pack contents
10 tips, title and fifth bullet
Amazon reference
B09WHH1WF2 (same reference on 5 Amazon marketplaces)
EAN
0761325364481
  • A named tip standard: 900M
  • Ten tips of one type
  • One shape only

Best for: A 936-type station owner who wears through conical tips and wants spares by the ten.

≈ 9 €
Check price on Amazon

Specifications

Iron fit
900M tips for Hakko, Radio Shack 64-053, FEITA, ATTEN, QUICK, Aoyue and 936, 852D+, 858D and 8586 stations, fourth bullet
Cartridge or bare tip
Absent from the listing — 900M-type tip, title
Shape
900M-T-B, title and fifth bullet
Size
Absent from the listing
Plating
Nickel-plated oxygen-free copper, first bullet
Pack contents
10 tips, title and fifth bullet
Amazon reference
B09WHH1WF2 (same reference on 5 Amazon marketplaces)
EAN
0761325364481

The Saipor tip listing, bullet by bullet

Five bullets: oxygen-free copper with nickel plating, lead-free; resistance to corrosion, oxidation and heat, with good tinning; easy removal and cleaning with a sponge; compatibility with 900M irons on Hakko, ATTEN, QUICK, Aoyue and 936-type stations; and ten 900M-T-B tips for small SMD work.

Saipor’s 900M standard

A shared tip format. 900M tips fit many 936-type soldering stations from several makers, which is why the fourth bullet can name so many. The B shape is a conical point.

Saipor and the YIHUA 926LED

The YIHUA soldering station reviewed on this site is the 926LED-IV EVO, which that review describes as using YIHUA’s own EVO 110W tips. This listing names other YIHUA soldering stations, not that one.

Availability

At the last look-up, the German, French, Italian and Spanish Amazon stores were asking 9 € to 14 €.

It is sold in the British Amazon store as well, in its own currency, which the euro figures above leave out on purpose.

The American Amazon store returned no entry, so the buy button there opens a search rather than a missing page.

Every figure here is Keepa’s reading on the date this page was last updated. Stock and prices can change at any time.

Prices quoted in this text were read on 15 September 2026. The live price is at the top of the page.

More soldering tips

  • Five Weller tips engraved ETP, ETB, ETA, ETC and ETSL, with conical and chisel ends

    Weller ET tip set, 5 pieces (ETA, ETB, ETC, ETP, ETSL), for WE1010

    Weller’s genuine five-piece ET tip set — ETA, ETB, ETC, ETP and ETSL — for the WE1010 soldering station and other compatible Weller stations, covering fine detail work to general repairs.

    Iron fit
    Weller WE1010 and other compatible Weller soldering stations, title and third bullet
    Cartridge or bare tip
    Absent from the listing — ET series tips, title and first bullet
    Shape
    ETA, ETB, ETC, ETP and ETSL, first bullet; the product photograph shows ETP and ETSL as conical points and ETA, ETB and ETC as chisels of different widths
    Size
    Absent from the listing
    Plating
    Absent from the listing
    Pack contents
    5 tips, title and first bullet
    Amazon reference
    B0F7Y52S94 (same reference on 5 Amazon marketplaces)
    EAN
    4003019448845
    • Genuine Weller ET tips for the WE1010 reviewed on this site
    • Five tip codes named
    • Tip shapes and sizes not described

    Best for: A Weller WE1010 owner who wants the matching tip series in one purchase.

    ≈ £17 / 20 €
    Check price on Amazon
  • Five long grey rod tips with tinned conical points

    BIlinli Replacement pointed tips for 30 W soldering irons, 5 pieces

    Five replacement pointed soldering tips from BIlinli for 30 W irons, with a pure copper core, iron, nickel and chrome plating and lead-free pre-tinning, for fine work in tight spaces.

    Iron fit
    30 W soldering irons and many other low-cost 30 W irons, first bullet; no model or shank size named
    Cartridge or bare tip
    Absent from the listing text — the product photograph shows plain rod tips with no collar
    Shape
    Pointed, fourth bullet
    Size
    Absent from the listing
    Plating
    Pure copper with iron, nickel and chrome plating; pre-tinned with lead-free solder, second and third bullets
    Pack contents
    5 tips, fifth bullet
    Amazon reference
    B081B375SD (same reference on 5 Amazon marketplaces)
    EAN
    6943862537434
    • Plating layers named: iron, nickel, chrome
    • Pre-tinned with lead-free solder
    • No iron model or shank diameter

    Best for: The owner of a basic 30 W iron who can match the tip against the old one before ordering.

    ≈ £7 / 6 €
    Check price on Amazon
  • Four silver tips with collars: a bevel, a chisel and two pencil points

    goobay Soldering tip set, 4 pieces, for fixpoint AP2 station 51091

    Four tips from goobay for the fixpoint AP2 soldering station, article 51091: two pencil tips of 0.5 and 1.5 mm, a 2.0 mm chisel and a 3.0 mm 45° bevel, each 70 mm long with a 6.6 mm collar, 4.8 mm shank and 22 mm tip.

    Iron fit
    fixpoint soldering station AP2, article 51091, title and first bullet
    Cartridge or bare tip
    Absent from the listing — collar and shank dimensions given, fourth and fifth bullets
    Shape
    Two pencil tips, one chisel, one 45° flat bevel, second and third bullets
    Size
    0.5 mm and 1.5 mm pencil, 2.0 mm chisel, 3.0 mm bevel; each 70 mm long, collar Ø 6.6 mm, shank Ø 4.8 mm, tip 22 mm, fourth and fifth bullets
    Plating
    Absent from the listing — resistant to corrosion, oxidation and high temperatures, first bullet
    Pack contents
    4 tips, title and third bullet
    Amazon reference
    B000V8GRIA (same reference on 5 Amazon marketplaces)
    EAN
    4040849510922
    • Every tip dimensioned: diameter, length, collar, shank
    • Four shapes from fine pencil to wide bevel
    • Plating not named

    Best for: A fixpoint AP2 station owner, or anyone who can match a 4.8 mm shank and 6.6 mm collar.

    ≈ 8 €
    Check price on Amazon

Elsewhere on the workbench

  • ELEGOO 8K Standard Rigid resin bottles in space grey

    ELEGOO 8K Standard Rigid resin, 405 nm, space grey, 2 kg

    A 2 kg pack of ELEGOO 8K Standard Rigid resin in space grey for 405 nm LCD printers, described as low-shrinkage and fast-curing for detailed prototypes, in leak-proof bottles, without exposure settings.

    Wavelength
    405 nm, fourth bullet
    Volume
    2 kg, title
    Recommended exposure
    Absent from the listing
    Viscosity
    Absent from the listing as a figure — high flowability is described, second bullet
    Finish
    Space grey, title; smooth surfaces for detailed prototypes, first bullet
    Grade
    8K Standard Rigid, title
    Handling guidance
    Absent from the listing text — leak-proof bottles and sturdy boxes are described, fifth bullet; the bottle label in the photograph lists shaking before use, gloves and a mask, 20–25 °C, and washing skin with plenty of water after contact
    Amazon reference
    B0DZN87BNP (same reference on 4 Amazon marketplaces)
    EAN
    6932704908617
    • A 2 kg pack for 405 nm LCD printers
    • Sold for high-detail 8K printing with low shrinkage, as the first bullet states
    • No exposure times

    Best for: Detailed miniatures and prototypes on a 405 nm resin printer, printed from the printer maker’s resin profile.

    ≈ 32 €
    Check price on Amazon
  • Blanks laid out: zip bags, mouse pads, pillow covers, a garden flag on a stand, coasters, keychains in three shapes and teardrop earrings

    AMDAILY Assorted sublimation blanks set: pillow covers, mouse pads, bags, flags, coasters, keychains, earrings

    A mixed set of sublimation blanks from AMDAILY — four pillow covers, four mouse pads, four make-up bags, four garden flags, twelve coasters, thirty-six keychains and sixteen earrings with their fittings — pressed at about 180–190 °C for 50–70 seconds under medium pressure.

    Coating
    Thermal transfer layer on neoprene, aluminium, wood, paper and polyester, second bullet
    Size and printable area
    Absent from the listing as sizes — 4 pillow covers, 4 mouse pads, 4 make-up bags, 4 garden flags, 12 coasters, 36 keychains with 36 fittings and 16 earrings with 16 hooks, first bullet; 114 pieces in the title
    Press fit
    Heat press, fourth and fifth bullets
    Recommended settings
    About 180–190 °C, 50–70 seconds, medium pressure, given as a reference, fourth bullet
    Finish
    Peach-skin polyester pillow covers, natural rubber mouse pads, protective film on both sides of earrings and keychains, third bullet
    Care advice
    Make-up bags and garden flags can be washed repeatedly, third bullet
    Amazon reference
    B0B388VXVK (same reference on 6 Amazon marketplaces)
    EAN
    0738627368400
    • A press setting given: 180–190 °C, 50–70 s, medium pressure
    • Seven kinds of blank in one set
    • 114 in the title; the contents add up to 80 blanks, or 132 with fittings

    Best for: A new heat press owner trying sublimation on several kinds of blank before buying any one in bulk.

    ≈ $21 / 30 €
    Check price on Amazon
  • Rounded-corner magnet blanks with white faces and black backs, some printed with photos on a fridge

    Calenxy Sublimation fridge magnet blanks 7.5 × 5.5 cm, 50 pieces

    Fifty sublimation magnet blanks from Calenxy, about 7.5 × 5.5 cm, in resin with a sublimation coating and a flexible magnetic back, printed in an oven or heat press and easy to cut into other shapes.

    Coating
    Stable sublimation coating on synthetic resin, first bullet
    Size and printable area
    About 7.5 × 5.5 cm, third bullet; 50 pieces in the title
    Press fit
    Oven or heat press, second bullet
    Recommended settings
    Absent from the listing
    Finish
    Absent from the listing — flexible magnetic back, first bullet
    Care advice
    Absent from the listing
    Amazon reference
    B0GSKBM1DW (same reference on 6 Amazon marketplaces)
    EAN
    0756993099674
    • Fifty blanks
    • Cuttable to custom shapes, as the fourth bullet says
    • No temperature or time

    Best for: A heat press owner making batches of small photo magnets as gifts.

    ≈ 14 €
    Check price on Amazon

All soldering tips