Skip to content

For the cheap 30 W iron

BIlinli Replacement pointed tips for 30 W soldering irons, 5 pieces

Five replacement pointed soldering tips from BIlinli for 30 W irons, with a pure copper core, iron, nickel and chrome plating and lead-free pre-tinning, for fine work in tight spaces.

Five long grey rod tips with tinned conical points

BIlinli Replacement pointed tips for 30 W soldering irons, 5 pieces

Five replacement pointed soldering tips from BIlinli for 30 W irons, with a pure copper core, iron, nickel and chrome plating and lead-free pre-tinning, for fine work in tight spaces.

Iron fit
30 W soldering irons and many other low-cost 30 W irons, first bullet; no model or shank size named
Cartridge or bare tip
Absent from the listing text — the product photograph shows plain rod tips with no collar
Shape
Pointed, fourth bullet
Size
Absent from the listing
Plating
Pure copper with iron, nickel and chrome plating; pre-tinned with lead-free solder, second and third bullets
Pack contents
5 tips, fifth bullet
Amazon reference
B081B375SD (same reference on 5 Amazon marketplaces)
EAN
6943862537434
  • Plating layers named: iron, nickel, chrome
  • Pre-tinned with lead-free solder
  • No iron model or shank diameter

Best for: The owner of a basic 30 W iron who can match the tip against the old one before ordering.

≈ £7 / 6 €
Check price on Amazon

Specifications

Iron fit
30 W soldering irons and many other low-cost 30 W irons, first bullet; no model or shank size named
Cartridge or bare tip
Absent from the listing text — the product photograph shows plain rod tips with no collar
Shape
Pointed, fourth bullet
Size
Absent from the listing
Plating
Pure copper with iron, nickel and chrome plating; pre-tinned with lead-free solder, second and third bullets
Pack contents
5 tips, fifth bullet
Amazon reference
B081B375SD (same reference on 5 Amazon marketplaces)
EAN
6943862537434

The BIlinli tip listing, bullet by bullet

Five bullets: tips for 30 W irons and many low-cost 30 W irons; a pure copper core with iron, nickel and chrome plating against corrosion; lead-free pre-tinning; a pointed shape for tight spaces; and five tips.

BIlinli and “30 W”

Wattage is not a fit. Irons of the same power use different shank diameters and lengths. The listing names none, so the old tip is the only reference.

BIlinli’s plating

Copper carries heat; the iron plating stops solder dissolving the copper, and nickel and chrome keep solder off the shank. The second bullet names all three layers.

Availability

At the last look-up, the German, French and Spanish Amazon stores were asking 6 € to 8 €.

It is sold in the British Amazon store as well, in its own currency, which the euro figures above leave out on purpose.

The asking price on the Italian Amazon store ran past 1.6× the lowest country’s. A gap that size points to goods shipped in from abroad rather than a local seller, so that offer is left out of the figures above.

The American Amazon store returned no entry, so the buy button there opens a search rather than a missing page.

Every figure here is Keepa’s reading on the date this page was last updated. Stock and prices can change at any time.

Prices quoted in this text were read on 15 September 2026. The live price is at the top of the page.

More soldering tips

  • Four silver tips with collars: a bevel, a chisel and two pencil points

    goobay Soldering tip set, 4 pieces, for fixpoint AP2 station 51091

    Four tips from goobay for the fixpoint AP2 soldering station, article 51091: two pencil tips of 0.5 and 1.5 mm, a 2.0 mm chisel and a 3.0 mm 45° bevel, each 70 mm long with a 6.6 mm collar, 4.8 mm shank and 22 mm tip.

    Iron fit
    fixpoint soldering station AP2, article 51091, title and first bullet
    Cartridge or bare tip
    Absent from the listing — collar and shank dimensions given, fourth and fifth bullets
    Shape
    Two pencil tips, one chisel, one 45° flat bevel, second and third bullets
    Size
    0.5 mm and 1.5 mm pencil, 2.0 mm chisel, 3.0 mm bevel; each 70 mm long, collar Ø 6.6 mm, shank Ø 4.8 mm, tip 22 mm, fourth and fifth bullets
    Plating
    Absent from the listing — resistant to corrosion, oxidation and high temperatures, first bullet
    Pack contents
    4 tips, title and third bullet
    Amazon reference
    B000V8GRIA (same reference on 5 Amazon marketplaces)
    EAN
    4040849510922
    • Every tip dimensioned: diameter, length, collar, shank
    • Four shapes from fine pencil to wide bevel
    • Plating not named

    Best for: A fixpoint AP2 station owner, or anyone who can match a 4.8 mm shank and 6.6 mm collar.

    ≈ 8 €
    Check price on Amazon
  • Box of brass inserts labelled 450PCS Hot Melt Nut Kit with a size table, seven brass tips, two adapters, tweezers, a 60 W iron and a stand with sponge

    ToyGem Heat-set insert kit: 450 brass inserts M2–M8, 7 insert tips, 2 adapters and a 60 W iron

    A heat-set insert kit from ToyGem for 3D printed parts: 450 brass threaded inserts in 15 sizes from M2 to M8, seven insert tips for M2 to M8 with two adapters, a 60 W iron adjustable from 200 to 450 °C, tweezers, an iron stand and a storage box.

    Iron fit
    The kit’s own 60 W iron with rotary control, 200–450 °C, fourth bullet
    Cartridge or bare tip
    Absent from the listing — 7 tips and 2 adapters for quick changes, third bullet
    Shape
    Heat-set insert tips, third bullet
    Size
    For M2, M2.5, M3, M4, M5, M6 and M8 inserts, third bullet
    Plating
    Absent from the listing text — the tips in the product photograph are brass-coloured
    Pack contents
    1 × 60 W iron, 450 brass inserts, 7 tips, 2 adapters, tweezers, iron stand and storage box, fifth bullet; inserts from 50 × M2×2×3.2 to 5 × M8×10×10 in 15 sizes, first bullet
    Amazon reference
    B0H6BLFQN8 (same reference on 4 Amazon marketplaces)
    EAN
    0768152617834
    • A tip for every insert size from M2 to M8
    • 450 inserts, each size counted
    • A heat-set insert kit rather than general soldering tips

    Best for: A 3D printer owner adding brass threads to PLA, PETG or ABS parts who has no insert tips yet.

    ≈ 26 €
    Check price on Amazon
  • Ten silver conical soldering tips lined up diagonally

    Saipor 900M-T-B conical tips for 936-type stations, 10 pieces

    Ten 900M-T-B conical soldering tips from Saipor in nickel-plated oxygen-free copper, lead-free, for 900M-standard irons on Hakko, ATTEN, QUICK, Aoyue and 936-type stations, for small SMD work on crowded boards.

    Iron fit
    900M tips for Hakko, Radio Shack 64-053, FEITA, ATTEN, QUICK, Aoyue and 936, 852D+, 858D and 8586 stations, fourth bullet
    Cartridge or bare tip
    Absent from the listing — 900M-type tip, title
    Shape
    900M-T-B, title and fifth bullet
    Size
    Absent from the listing
    Plating
    Nickel-plated oxygen-free copper, first bullet
    Pack contents
    10 tips, title and fifth bullet
    Amazon reference
    B09WHH1WF2 (same reference on 5 Amazon marketplaces)
    EAN
    0761325364481
    • A named tip standard: 900M
    • Ten tips of one type
    • One shape only

    Best for: A 936-type station owner who wears through conical tips and wants spares by the ten.

    ≈ 9 €
    Check price on Amazon

Elsewhere on the workbench

  • ERYONE PETG carbon fibre black filament spool

    ERYONE PETG carbon fibre 1.75 mm, black, 1 kg

    A 1 kg spool of black ERYONE PETG with carbon fibre, printed at 240–260 °C on a 100 °C bed, dried for 24 hours before vacuum packing and advised to be kept in resealable foil once opened.

    Base polymer
    PETG, title and first bullet
    Filler
    Carbon fibre, first bullet
    Nozzle requirement
    Absent from the listing
    Recommended temperatures
    Nozzle 240–260 °C, bed 100 °C, third bullet; the spool label in the product photograph reads 230–250 °C nozzle and 75–85 °C bed
    Drying advice
    Dried 24 hours before vacuum packing; store in resealable foil bags after opening, fifth bullet
    Net weight
    1 kg, title and second bullet
    Finish
    Absent from the listing
    Amazon reference
    B0D6G98F3K (same reference on 6 Amazon marketplaces)
    EAN
    0810168132280
    • Nozzle and bed temperatures published
    • Drying before packing and storage advice after opening
    • Two tolerances: ±0.03 mm in the title, ±0.02 mm in the bullet

    Best for: Stiff functional parts in PETG on a printer already fitted with a suitable nozzle.

    ≈ $25 / £21 / 23 €
    Check price on Amazon
  • eSUN ePLA-CF carbon fibre filled black filament spool

    eSUN PLA-CF carbon fibre filled 1.75 mm, black, 1 kg

    A 1 kg spool of black eSUN ePLA-CF: PLA with chopped carbon fibre for higher strength and flexural modulus and a matte finish, named as compatible with fast printers including the AnkerMake M5, with no nozzle guidance.

    Base polymer
    PLA, first bullet
    Filler
    Chopped carbon fibre, organically infiltrated, first bullet
    Nozzle requirement
    Absent from the listing
    Recommended temperatures
    Absent from the listing
    Drying advice
    Absent from the listing — lower water absorption than eSUN ePA-CF is stated, fourth bullet
    Net weight
    1 kg, title
    Finish
    Matte carbon fibre texture with less visible layering, second bullet
    Amazon reference
    B0CH36F58Y (same reference on 6 Amazon marketplaces)
    EAN
    0840249104332
    • Carbon fibre filler for higher strength and flexural modulus, as stated
    • A matte finish that makes layer lines less visible
    • No mention of whether a hardened nozzle is needed

    Best for: Stiff jigs, brackets and drone parts on a fast printer, once the nozzle is confirmed suitable.

    ≈ £20 / 17 €
    Check price on Amazon
  • Flashforge PETG-CF black filament spool

    Flashforge PETG carbon fibre 1.75 mm ±0.02 mm, black, 1 kg

    A 1 kg spool of black Flashforge PETG-CF in 1.75 mm ±0.02 mm, reinforced with carbon fibre for strength and heat resistance, dried for 24 hours and vacuum-sealed, whose later bullets describe PLA.

    Base polymer
    PETG, title and first bullet
    Filler
    Carbon fibre reinforcement, first bullet
    Nozzle requirement
    Absent from the listing
    Recommended temperatures
    Absent from the listing
    Drying advice
    Absent from the listing as advice — dried 24 hours before packing, vacuum-sealed with desiccant, second bullet
    Net weight
    1 kg, title
    Finish
    Absent from the listing
    Amazon reference
    B0CNYX58SV (same reference on 6 Amazon marketplaces)
    EAN
    6937120306856
    • Carbon fibre reinforcement for strength and temperature resistance, keeping PETG’s impact resistance, as stated
    • A ±0.02 mm tolerance in the title
    • The second, third and fourth bullets describe PLA

    Best for: Stiffer PETG parts for a Flashforge owner who will set temperatures from the maker’s profile.

    ≈ $26 / 26 €
    Check price on Amazon

All soldering tips