Skip to content

Sublimation only, by design

Tassendruck White ceramic sublimation mugs 300 ml, 12 pack

Twelve white ceramic sublimation mugs from Tassendruck, 300 ml, 9.5 cm high and 8 cm in diameter, weighing 350 g, described as dishwasher-proof and microwave-safe and suitable only for sublimation printing.

Plain white ceramic mug with a round handle

Tassendruck White ceramic sublimation mugs 300 ml, 12 pack

Twelve white ceramic sublimation mugs from Tassendruck, 300 ml, 9.5 cm high and 8 cm in diameter, weighing 350 g, described as dishwasher-proof and microwave-safe and suitable only for sublimation printing.

Coating
Sublimation layer; for sublimation printing only, first and fourth bullets
Size and printable area
300 ml, height 9.5 cm, diameter 8 cm, second bullet; printable area not given
Press fit
Absent from the listing — thermal printing with sublimation ink, first bullet
Recommended settings
Absent from the listing — results depend on print parameters, third bullet
Finish
White ceramic, 350 g, first and second bullets
Care advice
Dishwasher-proof and microwave-safe, second bullet
Amazon reference
B096Y1HVBN (same reference on 1 Amazon marketplace)
EAN
4251739386699
  • Height, diameter, weight and volume given
  • Dishwasher-proof and microwave-safe, as the second bullet says
  • No press settings

Best for: A mug press owner who can check an 8 cm diameter and 9.5 cm height against the press.

≈ 44 €
Check price on Amazon

Specifications

Coating
Sublimation layer; for sublimation printing only, first and fourth bullets
Size and printable area
300 ml, height 9.5 cm, diameter 8 cm, second bullet; printable area not given
Press fit
Absent from the listing — thermal printing with sublimation ink, first bullet
Recommended settings
Absent from the listing — results depend on print parameters, third bullet
Finish
White ceramic, 350 g, first and second bullets
Care advice
Dishwasher-proof and microwave-safe, second bullet
Amazon reference
B096Y1HVBN (same reference on 1 Amazon marketplace)
EAN
4251739386699

The Tassendruck mug listing, bullet by bullet

Five bullets: 12 white ceramic mugs for thermal printing with sublimation ink; dishwasher-proof and microwave-safe, 9.5 cm high, 8 cm across, 350 g, 300 ml; a note that the print result depends on the printing parameters, not the mug; a warning that they suit sublimation only, with uncoated mugs sold separately for painting; and gift uses.

Tassendruck gives dimensions

9.5 cm high, 8 cm across. A mug press clamps a range of diameters and heights; these two figures are what to compare. Volume alone does not say whether a mug fits.

Tassendruck on results

The third bullet puts the print result on the printing parameters rather than the mug. No parameters come with it.

Availability

At the last look-up, the German Amazon store was asking roughly 44 €.

The American, British, French, Italian and Spanish Amazon stores returned no entry, so the buy button there opens a search rather than a missing page.

Every figure here is Keepa’s reading on the date this page was last updated. Stock and prices can change at any time.

Prices quoted in this text were read on 15 September 2026. The live price is at the top of the page.

More sublimation blanks

  • Blanks laid out: zip bags, mouse pads, pillow covers, a garden flag on a stand, coasters, keychains in three shapes and teardrop earrings

    AMDAILY Assorted sublimation blanks set: pillow covers, mouse pads, bags, flags, coasters, keychains, earrings

    A mixed set of sublimation blanks from AMDAILY — four pillow covers, four mouse pads, four make-up bags, four garden flags, twelve coasters, thirty-six keychains and sixteen earrings with their fittings — pressed at about 180–190 °C for 50–70 seconds under medium pressure.

    Coating
    Thermal transfer layer on neoprene, aluminium, wood, paper and polyester, second bullet
    Size and printable area
    Absent from the listing as sizes — 4 pillow covers, 4 mouse pads, 4 make-up bags, 4 garden flags, 12 coasters, 36 keychains with 36 fittings and 16 earrings with 16 hooks, first bullet; 114 pieces in the title
    Press fit
    Heat press, fourth and fifth bullets
    Recommended settings
    About 180–190 °C, 50–70 seconds, medium pressure, given as a reference, fourth bullet
    Finish
    Peach-skin polyester pillow covers, natural rubber mouse pads, protective film on both sides of earrings and keychains, third bullet
    Care advice
    Make-up bags and garden flags can be washed repeatedly, third bullet
    Amazon reference
    B0B388VXVK (same reference on 6 Amazon marketplaces)
    EAN
    0738627368400
    • A press setting given: 180–190 °C, 50–70 s, medium pressure
    • Seven kinds of blank in one set
    • 114 in the title; the contents add up to 80 blanks, or 132 with fittings

    Best for: A new heat press owner trying sublimation on several kinds of blank before buying any one in bulk.

    ≈ $21 / 30 €
    Check price on Amazon
  • Rounded-corner magnet blanks with white faces and black backs, some printed with photos on a fridge

    Calenxy Sublimation fridge magnet blanks 7.5 × 5.5 cm, 50 pieces

    Fifty sublimation magnet blanks from Calenxy, about 7.5 × 5.5 cm, in resin with a sublimation coating and a flexible magnetic back, printed in an oven or heat press and easy to cut into other shapes.

    Coating
    Stable sublimation coating on synthetic resin, first bullet
    Size and printable area
    About 7.5 × 5.5 cm, third bullet; 50 pieces in the title
    Press fit
    Oven or heat press, second bullet
    Recommended settings
    Absent from the listing
    Finish
    Absent from the listing — flexible magnetic back, first bullet
    Care advice
    Absent from the listing
    Amazon reference
    B0GSKBM1DW (same reference on 6 Amazon marketplaces)
    EAN
    0756993099674
    • Fifty blanks
    • Cuttable to custom shapes, as the fourth bullet says
    • No temperature or time

    Best for: A heat press owner making batches of small photo magnets as gifts.

    ≈ 14 €
    Check price on Amazon
  • White ceramic mug beside a plain white box

    PixMax AAA white ceramic sublimation mugs 325 ml (11 oz), 36 pack, gift boxes

    Thirty-six white ceramic sublimation mugs from PixMax, AAA grade, 325 ml (11 oz) with a polymer coating, a large handle and a gloss finish, each in a protective presentation box, dishwasher-proof and microwave-safe, for heat transfer presses.

    Coating
    Polymer coating, title
    Size and printable area
    325 ml (11 oz), title and second bullet; printable area not given
    Press fit
    Heat transfer presses, fifth bullet
    Recommended settings
    Absent from the listing
    Finish
    White gloss ceramic, AAA grade, large handle, first and second bullets
    Care advice
    Microwave-safe and dishwasher-proof, third bullet
    Amazon reference
    B01705OTCM (same reference on 6 Amazon marketplaces)
    EAN
    5055986100836
    • Thirty-six mugs, each in a presentation box
    • Polymer coating named
    • No press settings

    Best for: A sublimation business pressing mugs in volume that needs boxes for each.

    ≈ £65 / 62 €
    Check price on Amazon

Elsewhere on the workbench

  • OVERTURE white TPU filament spool

    OVERTURE TPU 95A 1.75 mm, white, stretches over three times its length

    White OVERTURE TPU 95A in 1.75 mm, described as stretching to more than three times its original length without breaking and keeping for a year unopened when stored properly, with no spool weight given in the text.

    Shore hardness
    95A, title and first bullet
    Diameter tolerance
    Absent from the listing
    Net weight
    Absent from the listing text — the spool label in the photograph reads 1 kg
    Recommended speed and temperatures
    Absent from the listing
    Extruder guidance
    Absent from the listing
    Packaging
    Absent from the listing — a 1-year shelf life for unopened spools stored properly is stated, fifth bullet
    Amazon reference
    B09RFGDC6Q (same reference on 4 Amazon marketplaces)
    EAN
    0810031298686
    • Shore 95A and an elongation claim of more than three times the original length
    • Guidance that wall thickness and infill tune flexibility and stiffness
    • No weight in the text; only the photographed spool label reads 1 kg

    Best for: Flexible wearables and phone cases where tuning stiffness through infill is part of the design.

    ≈ 17 €
    Check price on Amazon
  • GEEETECH black TPU 95A filament spool

    GEEETECH TPU 95A 1.75 mm, black, 1 kg, with drying guidance

    A 1 kg spool of black GEEETECH TPU 95A in 1.75 mm, dried for 24 hours and vacuum-sealed in a resealable foil bag, whose listing advises storage with silica gel or drying for more than 8 hours at 65 °C.

    Shore hardness
    95A, title and first two bullets
    Diameter tolerance
    Absent from the listing text — the spool label in the photograph reads ±0.03 mm
    Net weight
    1 kg, title
    Recommended speed and temperatures
    Absent from the listing as print settings — drying at 65 °C for more than 8 hours is advised, fourth bullet
    Extruder guidance
    Absent from the listing
    Packaging
    Dried for 24 hours, vacuum-sealed in resealable foil bags, fourth bullet
    Amazon reference
    B0DPKBHKX9 (same reference on 4 Amazon marketplaces)
    EAN
    6974994174716
    • Dried for 24 hours before sealing, in a resealable foil bag
    • Drying guidance for later: more than 8 hours at 65 °C, or storage with silica gel
    • No print temperatures or speed

    Best for: A maker who prints TPU occasionally and needs to keep an opened spool usable.

    ≈ 18 €
    Check price on Amazon
  • SainSmart PEBA 90A black flexible filament spool

    SainSmart PEBA 90A flexible filament 1.75 mm, black, 1 kg

    A 1 kg spool of black SainSmart PEBA 90A in 1.75 mm, a nylon-based elastomer sold as a replacement for TPU, stated to be 20 % less dense than TPU with 78 % energy return, for printers with dual-gear extruders.

    Shore hardness
    90A, title and first bullet
    Diameter tolerance
    Absent from the listing
    Net weight
    1 kg, title
    Recommended speed and temperatures
    Absent from the listing as figures — described as printing up to 2× faster than TPU at higher flow, fourth bullet
    Extruder guidance
    Most FDM printers with 1.75 mm filament and dual-gear extruders, fifth bullet
    Packaging
    Absent from the listing
    Amazon reference
    B0FLPRXBWH (same reference on 6 Amazon marketplaces)
    EAN
    0810168145013
    • A PEBA elastomer: 20 % lower density than TPU and 78 % energy return, as stated
    • Extruder guidance given: dual-gear extruders
    • About three times the price of the TPU spools here

    Best for: Lightweight, springy parts such as drone guards and shoe insoles where rebound and weight matter more than cost.

    ≈ $53 / £56 / 55 €
    Check price on Amazon

All sublimation blanks