Skip to content

Tells the buyer how to dry it again

GEEETECH TPU 95A 1.75 mm, black, 1 kg, with drying guidance

A 1 kg spool of black GEEETECH TPU 95A in 1.75 mm, dried for 24 hours and vacuum-sealed in a resealable foil bag, whose listing advises storage with silica gel or drying for more than 8 hours at 65 °C.

GEEETECH black TPU 95A filament spool

GEEETECH TPU 95A 1.75 mm, black, 1 kg, with drying guidance

A 1 kg spool of black GEEETECH TPU 95A in 1.75 mm, dried for 24 hours and vacuum-sealed in a resealable foil bag, whose listing advises storage with silica gel or drying for more than 8 hours at 65 °C.

Shore hardness
95A, title and first two bullets
Diameter tolerance
Absent from the listing text — the spool label in the photograph reads ±0.03 mm
Net weight
1 kg, title
Recommended speed and temperatures
Absent from the listing as print settings — drying at 65 °C for more than 8 hours is advised, fourth bullet
Extruder guidance
Absent from the listing
Packaging
Dried for 24 hours, vacuum-sealed in resealable foil bags, fourth bullet
Amazon reference
B0DPKBHKX9 (same reference on 4 Amazon marketplaces)
EAN
6974994174716
  • Dried for 24 hours before sealing, in a resealable foil bag
  • Drying guidance for later: more than 8 hours at 65 °C, or storage with silica gel
  • No print temperatures or speed

Best for: A maker who prints TPU occasionally and needs to keep an opened spool usable.

≈ 18 €
Check price on Amazon

Specifications

Shore hardness
95A, title and first two bullets
Diameter tolerance
Absent from the listing text — the spool label in the photograph reads ±0.03 mm
Net weight
1 kg, title
Recommended speed and temperatures
Absent from the listing as print settings — drying at 65 °C for more than 8 hours is advised, fourth bullet
Extruder guidance
Absent from the listing
Packaging
Dried for 24 hours, vacuum-sealed in resealable foil bags, fourth bullet
Amazon reference
B0DPKBHKX9 (same reference on 4 Amazon marketplaces)
EAN
6974994174716

The GEEETECH TPU listing, bullet by bullet

Five bullets: TPU with Shore hardness 95A for flexible applications, robotics and models; TPU 95A for keyrings, insoles and phone cases; layer bonding and a smooth finish; a clog-free formula, 24 hours of drying before vacuum sealing in resealable foil, and advice to store with silica gel or dry for more than 8 hours at 65 °C; and wide printer compatibility and colours.

Drying guidance on the GEEETECH page

65 °C for more than 8 hours. TPU absorbs moisture quickly once opened, and wet TPU prints with bubbles and stringing. A published drying temperature is what an owner with a filament dryer needs, and GEEETECH gives it.

Resealable foil

A resealable bag lets the spool go back into dry storage after use. Among the flexible filaments here, only GEEETECH and Amazon Basics describe a bag that closes again.

Drying temperature, yes; nozzle temperature, no. ERYONE, reviewed alongside, publishes 190–220 °C for its TPU 95A.

Availability

At the last look-up, the German, French, Italian and Spanish Amazon stores were asking 18 € to 28 €.

The American and British Amazon stores returned no entry, so the buy button there opens a search rather than a missing page.

Every figure here is Keepa’s reading on the date this page was last updated. Stock and prices can change at any time.

Prices quoted in this text were read on 15 September 2026. The live price is at the top of the page.

More TPU filament

  • SainSmart PEBA 90A black flexible filament spool

    SainSmart PEBA 90A flexible filament 1.75 mm, black, 1 kg

    A 1 kg spool of black SainSmart PEBA 90A in 1.75 mm, a nylon-based elastomer sold as a replacement for TPU, stated to be 20 % less dense than TPU with 78 % energy return, for printers with dual-gear extruders.

    Shore hardness
    90A, title and first bullet
    Diameter tolerance
    Absent from the listing
    Net weight
    1 kg, title
    Recommended speed and temperatures
    Absent from the listing as figures — described as printing up to 2× faster than TPU at higher flow, fourth bullet
    Extruder guidance
    Most FDM printers with 1.75 mm filament and dual-gear extruders, fifth bullet
    Packaging
    Absent from the listing
    Amazon reference
    B0FLPRXBWH (same reference on 6 Amazon marketplaces)
    EAN
    0810168145013
    • A PEBA elastomer: 20 % lower density than TPU and 78 % energy return, as stated
    • Extruder guidance given: dual-gear extruders
    • About three times the price of the TPU spools here

    Best for: Lightweight, springy parts such as drone guards and shoe insoles where rebound and weight matter more than cost.

    ≈ $53 / £56 / 55 €
    Check price on Amazon
  • ERYONE white TPU filament spool

    ERYONE TPU 95A 1.75 mm, white, 0.5 kg

    A half-kilogram spool of white ERYONE TPU 95A in 1.75 mm, printed at 190–220 °C on a spool 200 mm across and 37 mm high, whose tolerance is ±0.03 mm in the title and ±0.05 mm in the bullets.

    Shore hardness
    95A, title and first bullet
    Diameter tolerance
    ±0.03 mm in the title; ±0.05 mm in the second bullet
    Net weight
    0.5 kg, title
    Recommended speed and temperatures
    190–220 °C, second bullet; no speed given
    Extruder guidance
    Absent from the listing
    Packaging
    Sealed vacuum bag, fourth bullet
    Amazon reference
    B07WDF31WP (same reference on 5 Amazon marketplaces)
    EAN
    0797550716290
    • A published print temperature, 190–220 °C, and Shore hardness 95A
    • Spool dimensions published: 200 mm outer, 57 mm inner, 37 mm high
    • Two different tolerances in title and bullets

    Best for: Trying TPU for the first time on a printer whose extruder can handle flexible filament.

    ≈ £12 / 12 €
    Check price on Amazon
  • Amazon Basics black TPU filament spool with gauge

    Amazon Basics TPU 1.75 mm ±0.05 mm, black, 1 kg, with spool gauge

    A 1 kg spool of black Amazon Basics TPU in 1.75 mm ±0.05 mm, with a gauge on the spool showing the percentage and approximate length left, vacuum-packed with a resealable storage bag, and no Shore hardness stated.

    Shore hardness
    Absent from the listing
    Diameter tolerance
    ±0.05 mm, first bullet
    Net weight
    1 kg spool, title and first bullet
    Recommended speed and temperatures
    Absent from the listing
    Extruder guidance
    Absent from the listing — the first bullet asks buyers to check spool size for compatibility
    Packaging
    Vacuum-packed in a moisture-absorbing bag, with a resealable storage bag, fourth and sixth bullets
    Amazon reference
    B08895Y2CP (same reference on 6 Amazon marketplaces)
    EAN
    0840095851817
    • A gauge built into the spool showing remaining filament in percent and approximate length
    • A resealable storage bag for use between prints
    • No Shore hardness, the defining figure of a flexible filament

    Best for: Occasional flexible parts such as phone cases and watch straps, where a spool gauge helps plan prints.

    ≈ £16 / 17 €
    Check price on Amazon

Elsewhere on the workbench

  • Ruler, craft knife, spatula, hook, tweezers, covered scissors, scraper, five blades and a felt pouch

    ImnBest Weeding tool set with craft knife, 5 blades and storage bag

    A weeding set from ImnBest with a hook, reverse-grip hook tweezers, micro-tip scissors with a removable cover, a spatula, a precision craft knife with five blades and a scraper, kept in a storage bag; the title says 13 pieces.

    Itemised contents
    1 hook, 1 hook tweezers, 1 scissors with removable cover, 1 spatula, 1 precision craft knife + 5 blades, 1 scraper and a storage bag, first bullet; 13 pieces in the title
    Hook and pick tips
    1 hook remover, first bullet
    Tweezers
    Hook tweezers with a reverse grip, fourth bullet
    Scraper
    1 scraper, first bullet
    Spatula
    1 spatula, first bullet
    Grip
    Absent from the listing
    Tip protection
    Removable cover on the micro-tip scissors, to protect the blade and the user, second and fourth bullets
    Storage
    Storage bag, first bullet
    Amazon reference
    B09QGCVH1Y (same reference on 6 Amazon marketplaces)
    EAN
    0792119433410
    • A precision craft knife with five spare blades
    • A cover on the scissors and a storage bag
    • The ruler that makes 13 appears only in the photograph

    Best for: A crafter who trims as well as weeds and wants a knife and a bag with the set.

    ≈ £5
    Check price on Amazon
  • Weeding set laid out: felt pouch, scraper, 20 cm ruler, scissors, craft knife with cap and spare blades, tweezers, hook and spatula

    MAMIELIZ Vinyl weeding tool set, 13 pieces

    A set of 13 vinyl weeding and craft tools from MAMIELIZ for cutting machine projects with adhesive vinyl and HTV, described in a single bullet as having smooth, burr-free surfaces, with no list of what the 13 pieces are.

    Itemised contents
    Absent from the listing text — 13 pieces in the title; the product photograph shows a felt pouch, scraper, 20 cm ruler, scissors, craft knife with cap and spare blades, tweezers, hook and spatula
    Hook and pick tips
    Absent from the listing text — the product photograph shows one hook
    Tweezers
    Absent from the listing text — the product photograph shows bent tweezers
    Scraper
    Absent from the listing text — the product photograph shows a small scraper
    Spatula
    Absent from the listing text — the product photograph shows a spatula
    Grip
    Absent from the listing
    Tip protection
    Absent from the listing text — the product photograph shows a cap beside the craft knife
    Storage
    Absent from the listing text — the product photograph shows a felt pouch
    Amazon reference
    B0DHGHSL73 (same reference on 5 Amazon marketplaces)
    EAN
    0765123383194
    • Thirteen pieces
    • Surfaces described as smooth and burr-free
    • The 13 pieces appear only in the photograph

    Best for: A beginner who wants a starter assortment and can check the contents in the product photograph.

    ≈ 5 €
    Check price on Amazon
  • Spatula, straight pick, hook, green tweezers, scraper, scissors and a scissor cap

    Kasanni Weeding tool set, 6 pieces, stainless steel with ABS handles

    Six weeding tools from Kasanni — a hook weeder, a straight weeder, hook tweezers with a reverse grip, a spatula, a scraper and scissors — in stainless steel, with thickened, grooved ABS handles on the weeder and tweezers.

    Itemised contents
    1 hook weeder, 1 straight weeder, 1 hook tweezers, 1 spatula, 1 scraper, 1 pair of scissors, first bullet
    Hook and pick tips
    Hook weeder and straight weeder for removing negative vinyl pieces, first and fourth bullets
    Tweezers
    Hook tweezers with a reverse grip, lifting and holding in one step, fourth bullet
    Scraper
    1 scraper, first bullet
    Spatula
    1 spatula, first bullet
    Grip
    Thickened ABS handles with grooves on the weeder and tweezers, fifth bullet
    Tip protection
    Absent from the listing text — the product photograph shows a cap beside the scissors
    Storage
    Absent from the listing
    Amazon reference
    B0D22MS8NT (same reference on 5 Amazon marketplaces)
    EAN
    0786562407555
    • All six tools named
    • Reverse-grip tweezers that hold without squeezing
    • No tip covers

    Best for: A vinyl crafter who wants a hook, a straight pick and reverse-grip tweezers in one set.

    ≈ 8 €
    Check price on Amazon

All TPU filament