Skip to content

A gauge on the spool, no hardness on the page

Amazon Basics TPU 1.75 mm ±0.05 mm, black, 1 kg, with spool gauge

A 1 kg spool of black Amazon Basics TPU in 1.75 mm ±0.05 mm, with a gauge on the spool showing the percentage and approximate length left, vacuum-packed with a resealable storage bag, and no Shore hardness stated.

Amazon Basics black TPU filament spool with gauge

Amazon Basics TPU 1.75 mm ±0.05 mm, black, 1 kg, with spool gauge

A 1 kg spool of black Amazon Basics TPU in 1.75 mm ±0.05 mm, with a gauge on the spool showing the percentage and approximate length left, vacuum-packed with a resealable storage bag, and no Shore hardness stated.

Shore hardness
Absent from the listing
Diameter tolerance
±0.05 mm, first bullet
Net weight
1 kg spool, title and first bullet
Recommended speed and temperatures
Absent from the listing
Extruder guidance
Absent from the listing — the first bullet asks buyers to check spool size for compatibility
Packaging
Vacuum-packed in a moisture-absorbing bag, with a resealable storage bag, fourth and sixth bullets
Amazon reference
B08895Y2CP (same reference on 6 Amazon marketplaces)
EAN
0840095851817
  • A gauge built into the spool showing remaining filament in percent and approximate length
  • A resealable storage bag for use between prints
  • No Shore hardness, the defining figure of a flexible filament

Best for: Occasional flexible parts such as phone cases and watch straps, where a spool gauge helps plan prints.

≈ £16 / 17 €
Check price on Amazon

Specifications

Shore hardness
Absent from the listing
Diameter tolerance
±0.05 mm, first bullet
Net weight
1 kg spool, title and first bullet
Recommended speed and temperatures
Absent from the listing
Extruder guidance
Absent from the listing — the first bullet asks buyers to check spool size for compatibility
Packaging
Vacuum-packed in a moisture-absorbing bag, with a resealable storage bag, fourth and sixth bullets
Amazon reference
B08895Y2CP (same reference on 6 Amazon marketplaces)
EAN
0840095851817

The Amazon Basics TPU listing, bullet by bullet

Six bullets: 1.75 mm ±0.05 mm filament on a 1 kg spool for common printers, with a note to check spool size, for small parts, phone cases and watch straps; stable, flexible TPU with good layer bonding and resistance to oil, grease and scratches; a spool gauge showing remaining percentage and length; a design aimed at fewer printer faults and a resealable storage bag; package dimensions of 24.8 × 23.6 × 40.8 cm and a weight of 0.9 kg; and vacuum packing in a moisture-absorbing bag.

Hardness missing from the Amazon Basics page

TPU is sold by its Shore hardness. 95A and 85A feel and print very differently, and the five other flexible filaments here publish a figure. This listing does not, so the flexibility of the result is unknown before printing.

A gauge on the spool

A remaining-length indicator helps decide whether a long print will finish on the spool. It is the one feature here no other filament listing offers.

A weight that does not add up

The fifth bullet gives 0.9 kg for a product sold as a 1 kg spool. The figure may describe something other than the filament, and the listing does not say what.

Availability

At the last look-up, the German, French, Italian and Spanish Amazon stores were asking 17 € to 26 €.

It is sold in the British Amazon store as well, in its own currency, which the euro figures above leave out on purpose.

The American Amazon catalogue lists the product, yet no seller was offering it.

Every figure here is Keepa’s reading on the date this page was last updated. Stock and prices can change at any time.

Prices quoted in this text were read on 15 September 2026. The live price is at the top of the page.

More TPU filament

  • eSUN black TPU-95A filament spool

    eSUN TPU-95A 1.75 mm, black, 1 kg

    A 1 kg spool of black eSUN TPU-95A in 1.75 mm, listing resistance to oil, solvents, scratches, tearing and weather, with good winding, in a vacuum-sealed bag with desiccant and no print settings.

    Shore hardness
    95A, title and first bullet
    Diameter tolerance
    Absent from the listing as a figure — very tight tolerance described, third bullet
    Net weight
    1 kg net, title and fifth bullet
    Recommended speed and temperatures
    Absent from the listing
    Extruder guidance
    Absent from the listing
    Packaging
    Vacuum-sealed bag with desiccant, fifth bullet
    Amazon reference
    B07PM2R9ZM (same reference on 6 Amazon marketplaces)
    EAN
    0781520911426
    • Resistance to oil, solvents, scratches, tearing, flexing and weather named
    • Net filament weight stated as 1 kg
    • No tolerance figure

    Best for: Flexible parts exposed to oil or outdoor conditions, such as gaskets, bumpers and straps.

    ≈ $28 / £19 / 18 €
    Check price on Amazon
  • OVERTURE white TPU filament spool

    OVERTURE TPU 95A 1.75 mm, white, stretches over three times its length

    White OVERTURE TPU 95A in 1.75 mm, described as stretching to more than three times its original length without breaking and keeping for a year unopened when stored properly, with no spool weight given in the text.

    Shore hardness
    95A, title and first bullet
    Diameter tolerance
    Absent from the listing
    Net weight
    Absent from the listing text — the spool label in the photograph reads 1 kg
    Recommended speed and temperatures
    Absent from the listing
    Extruder guidance
    Absent from the listing
    Packaging
    Absent from the listing — a 1-year shelf life for unopened spools stored properly is stated, fifth bullet
    Amazon reference
    B09RFGDC6Q (same reference on 4 Amazon marketplaces)
    EAN
    0810031298686
    • Shore 95A and an elongation claim of more than three times the original length
    • Guidance that wall thickness and infill tune flexibility and stiffness
    • No weight in the text; only the photographed spool label reads 1 kg

    Best for: Flexible wearables and phone cases where tuning stiffness through infill is part of the design.

    ≈ 17 €
    Check price on Amazon
  • GEEETECH black TPU 95A filament spool

    GEEETECH TPU 95A 1.75 mm, black, 1 kg, with drying guidance

    A 1 kg spool of black GEEETECH TPU 95A in 1.75 mm, dried for 24 hours and vacuum-sealed in a resealable foil bag, whose listing advises storage with silica gel or drying for more than 8 hours at 65 °C.

    Shore hardness
    95A, title and first two bullets
    Diameter tolerance
    Absent from the listing text — the spool label in the photograph reads ±0.03 mm
    Net weight
    1 kg, title
    Recommended speed and temperatures
    Absent from the listing as print settings — drying at 65 °C for more than 8 hours is advised, fourth bullet
    Extruder guidance
    Absent from the listing
    Packaging
    Dried for 24 hours, vacuum-sealed in resealable foil bags, fourth bullet
    Amazon reference
    B0DPKBHKX9 (same reference on 4 Amazon marketplaces)
    EAN
    6974994174716
    • Dried for 24 hours before sealing, in a resealable foil bag
    • Drying guidance for later: more than 8 hours at 65 °C, or storage with silica gel
    • No print temperatures or speed

    Best for: A maker who prints TPU occasionally and needs to keep an opened spool usable.

    ≈ 18 €
    Check price on Amazon

Elsewhere on the workbench

  • ELEGOO Water Washable Resin 2.0 bottle in beige

    ELEGOO Water Washable Resin 2.0, 405 nm, beige, 1 kg

    A 1 kg bottle of beige ELEGOO Water Washable Resin 2.0 for 405 nm LCD printers, cleaned with water rather than IPA, with a stated viscosity of 109.40 mPa·s at 25 °C and improved toughness claimed.

    Wavelength
    405 nm, title and fifth bullet
    Volume
    1000 g, title
    Recommended exposure
    Absent from the listing
    Wash and cure advice
    Cleans with water without alcohol or IPA, first bullet; faster curing described, fourth bullet
    Brittleness
    Absent from the listing as a figure — toughness described as improved over other water-washable resins, first bullet
    Finish
    Beige, title; smooth surfaces and sharp detail described, second bullet
    Disposal guidance
    Absent from the listing
    Amazon reference
    B0D21YXGX1 (same reference on 3 Amazon marketplaces)
    EAN
    6976021761708
    • A published viscosity: 109.40 mPa·s at 25 °C
    • Cleaned with water instead of IPA, as the first bullet states
    • No disposal guidance for resin-contaminated wash water

    Best for: Tabletop models printed without IPA in the workshop, once disposal of the wash water is planned.

    ≈ 17 €
    Check price on Amazon
  • RESIONE water-washable resin bottle in orange

    RESIONE Water Washable resin, 405 nm, flaming orange, 1 kg

    A 1 kg bottle of RESIONE water-washable resin in flaming orange for 405 nm printers, with viscosity described as close to water for high-speed modes, said to work with standard resin parameters, and no exposure figures.

    Wavelength
    405 nm, title; the bottle in the product photograph reads 385–405 nm
    Volume
    1 kg, title
    Recommended exposure
    Absent from the listing as figures — described as compatible with the standard resin parameters of most printers, second and sixth bullets
    Wash and cure advice
    Washes with water, no alcohol or IPA needed, first and third bullets; proper post-curing mentioned, fifth bullet
    Brittleness
    Described as not cracking after proper post-curing under varying indoor temperatures and humidity, fifth bullet
    Finish
    Flaming orange, title
    Disposal guidance
    Absent from the listing
    Amazon reference
    B0CLY9VLJR (same reference on 4 Amazon marketplaces)
    EAN
    0735812277288
    • Described as working with standard resin parameters, without special settings
    • Viscosity close to water, for larger prints and high-speed modes
    • No exposure figures and no disposal guidance

    Best for: Painted miniatures and moulds on a printer running default resin settings, where cracking has been a problem.

    ≈ 42 €
    Check price on Amazon
  • Silver Cricut weeder with a fine hooked tip and a pink hanging loop

    Cricut Weeder tool, single

    A single weeder tool from Cricut, made for lifting tiny negative cuts out of vinyl and iron-on designs, for stickers and home decor made on Cricut cutting machines.

    Itemised contents
    1 weeder tool, first bullet
    Hook and pick tips
    Made for lifting tiny negative cuts, second bullet; the product photograph shows a fine hooked tip
    Tweezers
    Absent from the listing
    Scraper
    Absent from the listing
    Spatula
    Absent from the listing
    Grip
    Absent from the listing
    Tip protection
    Absent from the listing
    Storage
    Absent from the listing
    Amazon reference
    B07SRDNCLN (same reference on 6 Amazon marketplaces)
    EAN
    0093573079016
    • Made by the cutting machine maker
    • For all vinyl and iron-on types
    • A single tool

    Best for: A Cricut cutting machine owner who needs just a hook for small lettering.

    ≈ $6 / £8 / 7 €
    Check price on Amazon

All TPU filament