Brand
A resin printer, its film, and a resin that says what to do with the water
The Sonic Mini 8K S publishes its 22 µm pixel pitch and a 165 × 72 × 170 mm build volume, and nothing about its vat, film or light source.
A sheet of PFA (nFEP) release film that names the Sonic Mini 8K S; and a grey water-washable resin that is the only one on this site to say what to do with contaminated wash water.
Exposure times on the resin, and the film’s thickness.
8K mono LCD, 7.1 inch · 22 µm XY resolution · 165 × 72 × 170 mm build volume · load up to 10 kg · Lychee, Chitubox and Tango supported
A 7.1 inch 8K mono-LCD resin printer that publishes a 22 µm XY resolution and a 165 × 72 × 170 mm build volume, and supports several third-party slicers.
Best for: A miniature printer where a published 22 µm pitch and a choice of slicer matter more than build area.
≈ 361 €
A single A4 sheet of Phrozen nFEP release film, made of PFA, for Phrozen printers from the Sonic Mini 8K S to the Shuffle series, described as releasing prints more easily and resisting heat better than ordinary FEP.
Best for: A Sonic Mini 8K S or other Phrozen owner replacing the vat film with the maker’s own PFA.
A 1 kg bottle of grey Phrozen water-washable resin for 405 nm LCD printers, low in viscosity and odour, with curing advice for parts and the only disposal guidance of the four resins here.
Best for: A water-washable resin workflow for a buyer who wants the maker’s word on handling the wash water.
A price quoted in the text of a MakerVerdict page dates from the day that page was written; the live figure beside each product is fetched while you read and replaces it.
