Current limiting protects the circuit, and the ripple figure tells the rest · review
WANPTEK POWER DPS605U, 0 to 60 V, 0 to 5 A review
A 0–60 V, 0–5 A bench supply with a four-digit display to 0.01 V and 0.001 A, an encoder with four buttons, automatic CC/CV switching and switchable overcurrent protection, plus USB-A and 18 W USB-C ports.
The bottom line A 60 V supply with a clear display and an efficient setting method. It names only overcurrent protection, and its box contents — UK plug, English manual — are worth checking for a European bench.
The DPS605U listing, bullet by bullet
Five bullets: a four-digit LED display showing voltage, current and power to 0.01 V and 0.001 A over 0–60 V and 0–5 A; an encoder with four buttons, each for a different value; USB-A and 18 W USB-C charging ports; automatic CC/CV switching and OCP that cuts the output on short circuit, the bullet written partly in Spanish; and a one-year warranty, with the supply, a UK-plug power cable, a test lead and an English manual in the box.
60 V on the WANPTEK bench
Twice the voltage of a 30 V supply, at half its current. 60 V × 5 A is 300 W on paper; the listing does not say whether the full current is available at the full voltage.
A mixed-language bullet
The fourth bullet alternates between German and Spanish mid-sentence. Its content is readable — CC/CV switching and OCP — and it is reported as such, but it is a sign the listing was assembled quickly.
A UK cable in a German box
The fifth bullet lists a power cable with a UK plug. On a supply sold to continental buyers, that means an adapter or a different cable before first use.
Availability
At the last look-up, the German, French, Italian and Spanish Amazon stores were asking 76 € to 80 €.
It is sold in the British Amazon store as well, in its own currency, which the euro figures above leave out on purpose.
The American Amazon catalogue lists the product, yet no seller was offering it.
Every figure here is Keepa’s reading on the date this page was last updated. Stock and prices can change at any time.
Prices quoted in this text were read on 15 September 2026. The live price is at the top of the page.
Where it earns its place, and where it falls short
Strengths
Up to 60 V, double the 30 V supplies in this family
An encoder with four buttons, one per digit, for direct setting
USB-A and an 18 W USB-C port
Compromises
OCP is the only protection named, and it must be enabled
The box contains a UK-plug power cable and an English manual, on a listing sold in Germany
The fourth bullet mixes German and Spanish
Specifications
Voltage and current range
0–60 V, 0–5 A, title and first bullet
Channels
Absent from the listing
Linear or switching design
Absent from the listing
Ripple
Absent from the listing
Display resolution
4-digit LED showing voltage, current and power; 0.01 V and 0.001 A, first bullet
Programmability
Absent from the listing — an encoder with four buttons, each for a different digit, second bullet
Protections
OCP, cutting the output on short circuit or overcurrent when enabled, fourth bullet
Amazon reference
B0CPLTT62V (same reference on 6 Amazon marketplaces)
EAN
0732656461378
Questions makers ask before buying
How is the WANPTEK DPS605U set?
The second bullet describes an encoder with four buttons, each corresponding to a different value, for setting voltage and current directly.
What plug does the DPS605U cable have?
The fifth bullet lists an AC power cable with a UK plug and an English manual in the box.
0–30 V, 0–10 A · 4-digit LED for voltage, current and power · keypad lock · output switch · protection against overcurrent, overheating and overvoltage · ground terminal · fan
A 0–30 V, 0–10 A bench supply with four-digit displays for voltage, current and calculated power, a lockable keypad and a front output switch, protected against overcurrent, overheating and overvoltage.
Best for: A general electronics bench up to 30 V and 10 A that wants settings locked between sessions.
32 V, 10 A · coarse and fine encoders, 0.01 V and 0.001 A setting · output on/off button · OCP · temperature-controlled fan · 20 W USB-A and USB-C · 115/230 V selectable
A 32 V, 10 A bench supply with coarse and fine encoder knobs setting to 0.01 V and 0.001 A, an output on/off button, overcurrent protection and two 20 W USB charging ports.
Best for: A maker bench powering microcontroller boards, single-board computers and motors up to 10 A, where knob-based setting saves time.
0–30 V, 0–10 A · programmable over USB from a PC · 4 memory presets · user-set OVP and OCP · 2.8 in TFT, numeric or curve display · 5 V 1 A USB port · 200–240 V input
A programmable 0–30 V, 0–10 A bench supply controlled from a computer over USB, with four memory presets, user-set overvoltage and overcurrent limits, and a 2.8-inch screen that shows readings as numbers or curves.
Best for: Logging or automating power tests from a computer, such as battery charging runs, at up to 30 V and 10 A.
