Airflow and temperature are two dials, and both decide the result · review
A 580 W hot air rework station with airflow selectable in one-litre steps up to 40 l/min, 100–500 °C under closed-loop sensor control, three memories, a brushless blower and automatic cooling triggered by a magnetic holder.
The bottom line The most precisely controllable hot air station of the five: airflow in litre steps, memories for both settings, closed-loop control and a magnetic holder. It has no iron and gives no nozzle sizes.
Five bullets: 580 W, airflow up to 40 l/min and 100–500 °C; air volume in 1 l steps, closed-loop sensor control and three memories for airflow and temperature; a low-wear brushless blower motor for long and industrial use; password protection, auto standby, automatic cooling via a magnetic contact in the holder, and calibration; and a control unit with LCD, a flexible silicone-sheathed 580 W handle, a side holder for either side and three additional nozzles.
1 l steps up to 40 l/min. Most hot air listings say airflow is adjustable; this one says by how much. Combined with three memories, a setting that works for a given part can be recalled instead of rediscovered.
The blower moves the air, and its motor is a wear part in constant use. A brushless motor is named here for durability, which is a specification rather than a promise.
A magnetic contact in the holder tells the station the handle is resting. Cooling and standby follow automatically, without relying on a button being pressed.
At the last look-up, the German Amazon store was asking roughly 129 €.
The American, French, Italian and Spanish Amazon catalogues list the product, yet no seller was offering it.
The British Amazon store returned no entry, so the buy button there opens a search rather than a missing page.
Every figure here is Keepa’s reading on the date this page was last updated. Stock and prices can change at any time.
Prices quoted in this text were read on 15 September 2026. The live price is at the top of the page.
| Heater power | 580 W, title and fifth bullet |
|---|---|
| Temperature range | 100–500 °C, first and second bullets |
| Airflow control | Up to 40 l/min, selectable in 1 l steps, first and second bullets; three memories for airflow and temperature |
| Nozzles | Three additional adapter nozzles, fifth bullet |
| Handle design | Flexible, silicone-sheathed, heat-resistant handle with a side holder mountable left or right, fifth bullet |
| Combo iron | None |
| Cool-down | Automatic cooling triggered by a magnetic contact in the holder, with auto standby, fourth bullet |
| Amazon reference | B0D2RQZD1R (same reference on 5 Amazon marketplaces) |
| EAN | 4250078325994 |
The second bullet says the air volume is selectable in 1 l steps up to 40 l, and three memories store airflow and temperature together.
The fourth bullet describes a magnetic contact in the holder that triggers automatic cooling, together with auto standby.
1000 W · 100–480 °C · 120 l/min maximum airflow · LED display · 4 nozzles
A 1000 W hot air rework station with a 100–480 °C range, a maximum airflow of 120 l/min and four nozzles, described in five bare lines.
Best for: Rework on larger boards and components that need high power and airflow, by someone who will read the ATTEN manual.
≈ £184 / 232 €
2-in-1 hot air and iron · iron 200–480 °C, sleep after 10 minutes · hot air 100–480 °C, cools to 100 °C in the holder · adjustable airflow · 3 nozzles, 5 tips · 220–240 V
A 2-in-1 station combining a soldering iron set from 200 to 480 °C with a hot air gun set from 100 to 480 °C, both PID-controlled, sold with three nozzles, five tips, tweezers and a desoldering pump.
Best for: A first rework bench that needs both an iron and hot air without two separate stations.
≈ 65 €
700 W · 100–500 °C · PID · adjustable airflow · auto start/stop in the holder, cooling to 100 °C · nozzles included · 230 V type F
A 700 W hot air rework station adjustable from 100 to 500 °C with PID control and adjustable airflow, whose gun cools to 100 °C and switches off when placed in its holder.
Best for: A maker who already owns a soldering iron and wants to add SMD rework, desoldering and heat-shrink work.
≈ 46 €
