Airflow and temperature are two dials, and both decide the result · review
A 2-in-1 station combining a soldering iron set from 200 to 480 °C with a hot air gun set from 100 to 480 °C, both PID-controlled, sold with three nozzles, five tips, tweezers and a desoldering pump.
The bottom line A practical all-in-one with the useful behaviours on both tools — sleep for the iron, cool-down for the gun — and a starter kit. The absence of any power figure leaves its heating capacity unstated.
Five bullets: a soldering iron and a hot air station in one unit, with separate digital displays, a power switch, and adjustable airflow and temperature; a set with solder wire, a desoldering pump, tweezers, three nozzles and five tips (I, B, K, 3.2D, 3C); an iron at 200–480 °C with PID and a 10-minute sleep; hot air at 100–480 °C with PID and a standby that cools the gun to 100 °C in its holder; and a one-year EU coverage, 220–240 V only, with a type F plug.
The iron starts at 200 °C; the hot air at 100 °C. Hot air is used lower for heat-shrink and gentle preheating, and the two ranges reflect that. Both share the 480 °C ceiling.
I, B, K, 3.2D and 3C are tip shape codes, conical, knife and chisel shapes among them. Listing them by code makes replacements easier to find, which the tip-less descriptions of several stations here do not allow.
Neither the iron nor the gun has a published wattage. For hot air in particular, power decides how quickly larger boards warm up, and this listing leaves it out.
At the last look-up, the German, French, Italian and Spanish Amazon stores were asking 65 € to 72 €.
The American and British Amazon catalogues list the product, yet no seller was offering it.
Every figure here is Keepa’s reading on the date this page was last updated. Stock and prices can change at any time.
Prices quoted in this text were read on 15 September 2026. The live price is at the top of the page.
| Heater power | Absent from the listing |
|---|---|
| Temperature range | Hot air 100–480 °C, fourth bullet; iron 200–480 °C, third bullet |
| Airflow control | Adjustable hot air volume, first bullet; no range given |
| Nozzles | Three hot air nozzles, second bullet |
| Handle design | Absent from the listing |
| Combo iron | Yes: a soldering iron with PID and sleep after 10 minutes, and five tips (I, B, K, 3.2D, 3C), second and third bullets |
| Cool-down | Placed in the holder, the gun is cooled to 100 °C and heating stops, fourth bullet |
| Amazon reference | B0F1G4FBM4 (same reference on 6 Amazon marketplaces) |
| EAN | 6978139050965 |
The second bullet lists five tips, I, B, K, 3.2D and 3C, along with three hot air nozzles, tweezers, a desoldering pump and solder wire.
No. The fifth bullet says it is rated for 220–240 V 50 Hz with a type F EU plug and must not be connected to a 110 V socket.
1000 W · 100–480 °C · 120 l/min maximum airflow · LED display · 4 nozzles
A 1000 W hot air rework station with a 100–480 °C range, a maximum airflow of 120 l/min and four nozzles, described in five bare lines.
Best for: Rework on larger boards and components that need high power and airflow, by someone who will read the ATTEN manual.
≈ £184 / 232 €
580 W · 100–500 °C · airflow to 40 l/min in 1 l steps · closed-loop sensor control · 3 memories · brushless blower · auto cooling via magnetic holder · password protection · 3 nozzles
A 580 W hot air rework station with airflow selectable in one-litre steps up to 40 l/min, 100–500 °C under closed-loop sensor control, three memories, a brushless blower and automatic cooling triggered by a magnetic holder.
Best for: A repair bench doing regular SMD rework, where airflow must be set precisely and repeated from memory.
≈ 129 €
700 W · 100–500 °C · PID · adjustable airflow · auto start/stop in the holder, cooling to 100 °C · nozzles included · 230 V type F
A 700 W hot air rework station adjustable from 100 to 500 °C with PID control and adjustable airflow, whose gun cools to 100 °C and switches off when placed in its holder.
Best for: A maker who already owns a soldering iron and wants to add SMD rework, desoldering and heat-shrink work.
≈ 46 €
