Airflow and temperature are two dials, and both decide the result · review
A 700 W hot air rework station adjustable from 100 to 500 °C with PID control and adjustable airflow, whose gun cools to 100 °C and switches off when placed in its holder.
The bottom line A focused hot air station with a clear temperature range and an automatic cool-down in the holder. Airflow and nozzles are named without figures, which are the two settings a rework job is run with.
Five bullets: a digital real-time temperature display and a new heating element for SMD soldering beyond what an iron station can do; 100–500 °C with PID control to protect chips from overheating; automatic start and stop, cooling the gun to 100 °C in the holder before switching off; a step up for users with only an iron station, for through-hole sockets, QFP, PLCC, BGA and heat-shrink; and 230 V with a type F plug and 12 months of EU technical support.
Put the gun down and it cools itself to 100 °C before switching off. The third bullet presents the cool-down as reducing unnecessary wear on the heating element and extending its life.
Air volume is adjustable, according to the title, and no range is given. For rework, airflow decides whether small parts stay in place, and it is the setting to find in the manual.
No iron is included. The listing is explicit that this is the second tool, added beside a soldering station — which is also how the page reads it.
At the last look-up, the German, French, Italian and Spanish Amazon stores were asking 46 € to 60 €.
The American Amazon catalogue lists the product, yet no seller was offering it.
The British Amazon store returned no entry, so the buy button there opens a search rather than a missing page.
Every figure here is Keepa’s reading on the date this page was last updated. Stock and prices can change at any time.
Prices quoted in this text were read on 15 September 2026. The live price is at the top of the page.
| Heater power | 700 W, title |
|---|---|
| Temperature range | 100–500 °C, second bullet |
| Airflow control | Adjustable air volume, title; no range given |
| Nozzles | Hot air nozzles included, title; number not stated |
| Handle design | Absent from the listing |
| Combo iron | None; the fourth bullet presents it as a companion to an existing soldering station |
| Cool-down | Placed in the holder, the gun cools automatically to 100 °C and then switches off, third bullet |
| Amazon reference | B0BYSKPJQX (same reference on 5 Amazon marketplaces) |
| EAN | 6974443671803 |
The third bullet says that, placed in the holder, the gun cools automatically to 100 °C and then switches off temporarily, to reduce wear on the heating element.
No. The fourth bullet presents it for users who so far have only a soldering station and want to add SMD rework.
1000 W · 100–480 °C · 120 l/min maximum airflow · LED display · 4 nozzles
A 1000 W hot air rework station with a 100–480 °C range, a maximum airflow of 120 l/min and four nozzles, described in five bare lines.
Best for: Rework on larger boards and components that need high power and airflow, by someone who will read the ATTEN manual.
≈ £184 / 232 €
580 W · 100–500 °C · airflow to 40 l/min in 1 l steps · closed-loop sensor control · 3 memories · brushless blower · auto cooling via magnetic holder · password protection · 3 nozzles
A 580 W hot air rework station with airflow selectable in one-litre steps up to 40 l/min, 100–500 °C under closed-loop sensor control, three memories, a brushless blower and automatic cooling triggered by a magnetic holder.
Best for: A repair bench doing regular SMD rework, where airflow must be set precisely and repeated from memory.
≈ 129 €
2-in-1 hot air and iron · iron 200–480 °C, sleep after 10 minutes · hot air 100–480 °C, cools to 100 °C in the holder · adjustable airflow · 3 nozzles, 5 tips · 220–240 V
A 2-in-1 station combining a soldering iron set from 200 to 480 °C with a hot air gun set from 100 to 480 °C, both PID-controlled, sold with three nozzles, five tips, tweezers and a desoldering pump.
Best for: A first rework bench that needs both an iron and hot air without two separate stations.
≈ 65 €
