A wash and cure station with a 228 × 128 × 260 mm wash size and a 7.6 litre two-layer basket that washes with the build platform attached, and a rotatable gooseneck light for curing hidden areas.
The bottom line A generous station for large resin printers, with a clear wash size, adjustable basket height and a flexible curing light. Agitation, timers and lid are not described, and the listing measures its improvements only against its own predecessor.
The Wash & Cure 3 Plus listing, bullet by bullet
Five bullets: a wash size of 228 × 128 × 260 mm and a basket volume up 13.4 % to 7.6 l compared with the Wash & Cure Plus, for LCD printers of 10.6 in and below; a rotatable Flexicure gooseneck light raising energy at 1–3 cm by 30,000 µW/cm²; a new LED bead arrangement with a lens, curing 20 % more evenly than the previous generation; a two-layer PP basket that washes with the platform attached, with heights of 150 and 250 mm and platforms from 6.6 to 10.6 in; and a two-layer curing platform for more models per cycle.
Comparisons with its own predecessor
13.4 % more volume and 20 % more even curing, both against the Wash & Cure Plus. They tell an owner of the older station what has changed. They do not place this station against any other maker’s, and the page reads them that way.
A basket without described agitation
The volume and heights are given; how the alcohol moves around the part is not. Washing is what removes uncured resin before curing, and the listing leaves the mechanism undescribed.
Printer names on an ANYCUBIC page
The first bullet names ANYCUBIC’s own Photon Mono M5s and the Saturn 3 series among compatible printers. The fit that matters is the platform size, 6.6 to 10.6 inches, which the fourth bullet gives.
Availability
At the last look-up, the German, French, Italian and Spanish Amazon stores were asking 153 € to 200 €.
The British Amazon catalogue lists the product, yet no seller was offering it.
The American Amazon store returned no entry, so the buy button there opens a search rather than a missing page.
Every figure here is Keepa’s reading on the date this page was last updated. Stock and prices can change at any time.
Prices quoted in this text were read on 15 September 2026. The live price is at the top of the page.
Where it earns its place, and where it falls short
Strengths
A 228 × 128 × 260 mm wash size and a 7.6 l basket that takes the build platform
Two basket heights, 150 and 250 mm, to use less alcohol for smaller platforms
A rotatable gooseneck light for curing the tops of models and fine areas
Compromises
No agitation method described, so how the basket cleans is not stated
No timers or lid described
The 13.4 % and 20 % improvement figures compare with the previous model, not with other stations
Specifications
Wash container size
228 × 128 × 260 mm, 7.6 l basket, title and first bullet
Agitation
Absent from the listing
Curing light
Flexicure rotatable gooseneck light adding 30,000 µW/cm² at 1–3 cm, and a new LED arrangement with a lens light source, second and third bullets
Turntable
Absent from the listing — a two-layer curing platform is described, fifth bullet
Timers
Absent from the listing
Lid
Absent from the listing
Printer compatibility
LCD printers such as the Photon Mono M5s and Saturn 3 series, and others of 10.6 in and below; platforms from 6.6 to 10.6 in, first and fourth bullets
Amazon reference
B08ZCK8511 (same reference on 5 Amazon marketplaces)
EAN
0715235125540
Questions makers ask before buying
Will it fit my printer’s build platform?
The fourth bullet says the basket accepts platforms from 6.6 to 10.6 inches, and the first names the Photon Mono M5s and Saturn 3 series among compatible printers.
What does the gooseneck light do?
The second bullet says the rotatable Flexicure light raises the energy at 1 to 3 cm by 30,000 µW/cm², helping cure the tops of models and fine areas such as skirts on figures.
Low-temperature PCL, 1.75 mm · 2 speeds and 2 temperature levels · cordless, USB-C charging · TouchSafe design · 37 m of PCL in 12 colours included
A cordless 3D pen for children that draws with low-temperature PCL filament, with two speeds and two temperature levels, and a maker’s note that it is used according to the instructions and under supervision.
Best for: A younger child’s first 3D pen, used with an adult nearby, where a low-temperature filament is the point.
Cool-touch design, no external hot parts · one button · reverse function · cordless, USB-C charging · 72 filament strands · ages 6 to 13
A cordless 3D pen for children aged 6 to 13 with a cool-touch design and no external hot parts, sold with 72 filament strands and a guide of ten projects, whose listing names neither the filament material nor a temperature.
Best for: A child from six making simple projects from a guided activity book, with refills bought from the same maker.
1.75 mm ABS and PLA · stepless speed slider · ultrasonically sealed nozzle · mains adapter · three PLA colours included
A slim 1.75 mm pen for ABS and PLA with a stepless speed slider and an ultrasonically sealed nozzle, described in five short bullets that give no temperature and no safety provision.
Best for: An adult artist or engineer who wants a simple pen for ordinary 1.75 mm PLA and ABS refills.
