A whole computer on a card, and the power supply is part of the board · review
db-tronic Raspberry Pi 4 starter set, 64 GB card, 15 W supply review
A Raspberry Pi 4 starter set with a 15 W power supply, a case, a 64 GB memory card with USB reader, four aluminium heatsinks and a micro-HDMI cable, whose title says 1 GB and whose part number says 4 GB.
The bottom line A complete starter set with the accessories a first Pi needs. Its memory size is stated two different ways, and on a Raspberry Pi 4 that figure decides what the kit can run.
The db-tronic starter set listing, bullet by bullet
Eight bullets: a Raspberry Pi 4 with 1 GB; an original 15 W supply; an original case described as protecting and cooling; a 64 GB memory card; a USB card reader for preparing the system; a four-piece aluminium heatsink set, the bullet text partly duplicated; a 1 m 4K micro-HDMI cable; and gift-ready packaging.
1 GB or 4 GB in the db-tronic kit
The title says 1 GB; the part number says 4GB. Home Assistant and retro gaming both appear in the title as uses, and the memory size bears on what either can run. This is the first thing to ask the seller.
A complete box
Supply, card, reader, case, heatsinks and cable cover the usual first purchase. The bare Raspberry Pi 4 reviewed here needs all of them bought separately.
Bullets shared with another kit
The Raspberry Pi 4 4 GB kit sold under the smart-home-komponente name uses near-identical wording for its supply, case, heatsinks and cable. This page reports the resemblance and draws no conclusion about who assembles either kit.
Availability
At the last look-up, the German, French and Italian Amazon stores were asking roughly 90 €.
It is sold in the British Amazon store as well, in its own currency, which the euro figures above leave out on purpose.
The American and Spanish Amazon catalogues list the product, yet no seller was offering it.
Every figure here is Keepa’s reading on the date this page was last updated. Stock and prices can change at any time.
Prices quoted in this text were read on 15 September 2026. The live price is at the top of the page.
Where it earns its place, and where it falls short
Strengths
Everything needed to start: supply, case, 64 GB card, card reader, heatsinks and HDMI cable
A 15 W supply described as original
A USB card reader to prepare the operating system on a computer
Compromises
Title and part number disagree on memory: 1 GB against 4 GB
No operating system named or preinstalled
Board specifications are not listed at all
Specifications
Processor
Absent from the listing — a Raspberry Pi 4 is named without its processor
RAM
1 GB in the title and first bullet; the part number reads RPI-4-4GB-KIT
Storage options
64 GB memory card and a USB card reader included, fourth and fifth bullets
GPIO header
Absent from the listing
Ports
Absent from the listing — a 1 m 4K micro-HDMI cable is included, seventh bullet
Power requirement
15 W power supply included, described as original, second bullet
Cooling
Case described as providing cooling, and a 4-piece aluminium heatsink set, third and sixth bullets
Operating system support
Absent from the listing — smart home, retro gaming and Home Assistant are named as uses in the title
Amazon reference
B0DWLTHKRY (same reference on 6 Amazon marketplaces)
EAN
9502224541631
Questions makers ask before buying
Does the db-tronic set have 1 GB or 4 GB?
The title and first bullet say 1 GB; the part number is RPI-4-4GB-KIT. The listing does not reconcile them, so the memory size should be confirmed with the seller.
What is in the db-tronic Raspberry Pi 4 set?
The bullets list the board, a 15 W supply, a case, a 64 GB memory card, a USB card reader, a 4-piece aluminium heatsink set, a 1 m 4K micro-HDMI cable and packaging.
Amlogic A311D, 4 × Cortex-A73 at 2.2 GHz and 2 × Cortex-A53 at 1.8 GHz, 12 nm · 5.0 TOPS NPU · 4 GB + 32 GB · 16 MB SPI flash · PCIe or USB 3.0 · Gigabit Ethernet with WOL · 2 × MIPI-CSI · programmable MCU
A single-board computer on the hexa-core Amlogic A311D with a 5.0 TOPS neural processing unit, 4 GB of memory and 32 GB of storage, switchable PCIe or USB 3.0, Gigabit Ethernet with wake-on-LAN and two MIPI-CSI camera inputs.
Best for: An AI vision or digital signage project that needs an NPU, two cameras and dual displays on one board.
Broadcom BCM2711, quad Cortex-A72 64-bit at 1.5 GHz · 2 GB · 40-pin GPIO · 2 × USB 3.0, 2 × USB 2.0, Gigabit Ethernet · dual-band Wi-Fi, Bluetooth 5.0 · no power, storage or cooling details
The Raspberry Pi 4 Model B with 2 GB, built on a Broadcom BCM2711 quad-core Cortex-A72 at 1.5 GHz, with two USB 3.0 and two USB 2.0 ports, Gigabit Ethernet, dual-band Wi-Fi and the standard 40-pin header.
Best for: A maker who already has a power supply, a microSD card and a case, and wants the bare board.
Raspberry Pi 4 with 4 GB · 15 W USB-C supply · official case, black · Ultra 64 GB microSDHC with SD adapter · 4-piece aluminium heatsinks · 1 m 4K micro-HDMI cable
A Raspberry Pi 4 starter set with 4 GB of memory, a 15 W USB-C supply, a black case, a 64 GB microSDHC card with adapter, aluminium heatsinks and a 4K micro-HDMI cable.
Best for: A Home Assistant or retro gaming setup that benefits from 4 GB, bought as one box.