A whole computer on a card, and the power supply is part of the board · review
Raspberry Pi Raspberry Pi 4 Model B, 2 GB review
The Raspberry Pi 4 Model B with 2 GB, built on a Broadcom BCM2711 quad-core Cortex-A72 at 1.5 GHz, with two USB 3.0 and two USB 2.0 ports, Gigabit Ethernet, dual-band Wi-Fi and the standard 40-pin header.
The bottom line The bare board, described by processor, radios, ports and header. Everything needed to run it — power, storage, case, operating system — is outside this listing and has to be bought or known.
The Raspberry Pi 4 Model B listing, bullet by bullet
Five bullets: a Broadcom BCM2711 quad-core Cortex-A72 64-bit SoC at 1.5 GHz; 1, 2, 4 or 8 GB of SDRAM depending on model; dual-band 802.11ac Wi-Fi, Bluetooth 5.0, BLE and Gigabit Ethernet; two USB 3.0 and two USB 2.0 ports; and the standard 40-pin GPIO header, compatible with earlier boards.
A bare board against the kits
No supply, no card, no case. The two Raspberry Pi 4 kits reviewed here add those parts and cost more. The bare board suits someone who already owns them, and the listing makes clear by omission that nothing else is included.
RAM listed for the whole range
The second bullet names every memory size. The title fixes this offer at 2 GB, which is the figure to rely on.
What a Pi 4 needs that the listing omits
A power supply of adequate rating, a microSD card with an operating system, and often a heatsink. None is described, and each has to be chosen separately.
Availability
At the last look-up, the German, French, Italian and Spanish Amazon stores were asking 71 € to 73 €.
It is sold in the American and British Amazon stores as well, in their own currency, which the euro figures above leave out on purpose.
Every figure here is Keepa’s reading on the date this page was last updated. Stock and prices can change at any time.
Prices quoted in this text were read on 15 September 2026. The live price is at the top of the page.
Where it earns its place, and where it falls short
Strengths
The reference board: a 40-pin header compatible with earlier Raspberry Pi accessories
Two USB 3.0 ports and Gigabit Ethernet
Dual-band 802.11ac Wi-Fi and Bluetooth 5.0 with BLE
Compromises
Board only: no power supply, storage card, case or cooling
No power requirement stated
The second bullet lists RAM for every version rather than this one
Specifications
Processor
Broadcom BCM2711, quad-core Cortex-A72 (Arm v8) 64-bit SoC at 1.5 GHz, first bullet
RAM
2 GB, title; the second bullet lists the 1, 2, 4 and 8 GB versions of the board
Storage options
Absent from the listing
GPIO header
Standard 40-pin Raspberry Pi header, backwards compatible with earlier boards, fifth bullet
Ports
2 × USB 3.0, 2 × USB 2.0 and Gigabit Ethernet, third and fourth bullets
Power requirement
Absent from the listing
Cooling
Absent from the listing
Operating system support
Absent from the listing
Amazon reference
B09TTNPB4J (same reference on 6 Amazon marketplaces)
EAN
5056561800332
Questions makers ask before buying
How much RAM does this Raspberry Pi 4 have?
The title says 2 GB. The second bullet lists the 1, 2, 4 and 8 GB versions of the board, depending on model.
Which ports does the Raspberry Pi 4 Model B list?
The fourth bullet lists two USB 3.0 and two USB 2.0 ports, and the third Gigabit Ethernet along with dual-band Wi-Fi and Bluetooth 5.0.
Raspberry Pi 4, 1 GB in the title and 4 GB in the part number · 15 W supply · official case · 64 GB card and USB reader · 4-piece aluminium heatsinks · 1 m 4K micro-HDMI cable
A Raspberry Pi 4 starter set with a 15 W power supply, a case, a 64 GB memory card with USB reader, four aluminium heatsinks and a micro-HDMI cable, whose title says 1 GB and whose part number says 4 GB.
Best for: A first Raspberry Pi for a light Home Assistant or retro gaming setup, once the memory size has been confirmed.
Amlogic A311D, 4 × Cortex-A73 at 2.2 GHz and 2 × Cortex-A53 at 1.8 GHz, 12 nm · 5.0 TOPS NPU · 4 GB + 32 GB · 16 MB SPI flash · PCIe or USB 3.0 · Gigabit Ethernet with WOL · 2 × MIPI-CSI · programmable MCU
A single-board computer on the hexa-core Amlogic A311D with a 5.0 TOPS neural processing unit, 4 GB of memory and 32 GB of storage, switchable PCIe or USB 3.0, Gigabit Ethernet with wake-on-LAN and two MIPI-CSI camera inputs.
Best for: An AI vision or digital signage project that needs an NPU, two cameras and dual displays on one board.
Raspberry Pi 4 with 4 GB · 15 W USB-C supply · official case, black · Ultra 64 GB microSDHC with SD adapter · 4-piece aluminium heatsinks · 1 m 4K micro-HDMI cable
A Raspberry Pi 4 starter set with 4 GB of memory, a 15 W USB-C supply, a black case, a 64 GB microSDHC card with adapter, aluminium heatsinks and a 4K micro-HDMI cable.
Best for: A Home Assistant or retro gaming setup that benefits from 4 GB, bought as one box.