Skip to content

Twenty centimetres, three ends

ELEGOO Jumper wires 3 × 40, 20 cm, M-M, F-M and F-F

Three 40-wire ribbons of 20 cm jumper wires from ELEGOO — female to female, male to female and male to male — in many colours for following a circuit, separable into single wires.

Three equal-length rainbow jumper ribbons: socket to socket, socket to pin and pin to pin

ELEGOO Jumper wires 3 × 40, 20 cm, M-M, F-M and F-F

Three 40-wire ribbons of 20 cm jumper wires from ELEGOO — female to female, male to female and male to male — in many colours for following a circuit, separable into single wires.

Tie points
Absent from the listing — wires only
Power rails
Absent from the listing
Contact quality
Absent from the listing
Backing
Absent from the listing
Wire types and lengths
40 female-female, 40 male-female, 40 male-male; 20 cm, third and fourth bullets
Gauge
Absent from the listing
Pack contents
3 ribbons of 40 wires, fourth bullet
Amazon reference
B01EV70C78 (same reference on 3 Amazon marketplaces)
EAN
0719377200424
  • All three end types
  • Many colours for tracing a circuit
  • One length only: 20 cm

Best for: A breadboard user who wants one length of each wire type from the same maker as their board.

≈ $7 / £6 / 7 €
Check price on Amazon

Specifications

Tie points
Absent from the listing — wires only
Power rails
Absent from the listing
Contact quality
Absent from the listing
Backing
Absent from the listing
Wire types and lengths
40 female-female, 40 male-female, 40 male-male; 20 cm, third and fourth bullets
Gauge
Absent from the listing
Pack contents
3 ribbons of 40 wires, fourth bullet
Amazon reference
B01EV70C78 (same reference on 3 Amazon marketplaces)
EAN
0719377200424

The ELEGOO jumper wire listing, bullet by bullet

Five bullets: colourful wires that make circuits easy to follow on a breadboard; quick connection of devices to breadboards and modules; 20 cm ribbons of 40 separable wires; one ribbon each of female-female, male-female and male-male; and a note that ELEGOO keeps improving its products.

ELEGOO’s colours

Colour as documentation. The first bullet makes the point that different colours let a circuit be traced by eye. On a crowded board, a red wire for power and black for ground saves checking.

What ELEGOO leaves out

No gauge and no description of the pins. GERUI on this site gives 28 AWG for the same three types.

Availability

At the last look-up, the German Amazon store was asking roughly 7 €.

It is sold in the American and British Amazon stores as well, in their own currency, which the euro figures above leave out on purpose.

The French, Italian and Spanish Amazon stores returned no entry, so the buy button there opens a search rather than a missing page.

Every figure here is Keepa’s reading on the date this page was last updated. Stock and prices can change at any time.

Prices quoted in this text were read on 15 September 2026. The live price is at the top of the page.

More breadboards and jumper wires

  • Two 400-point and two 830-point breadboards beside three rainbow jumper ribbons

    HUAREW Breadboard kit: 2 × 830 and 2 × 400 boards, 40-pin F-F, F-M and M-M jumper ribbons

    A breadboard kit from HUAREW with two 830-point and two 400-point breadboards that take 20–29 AWG (0.3–0.8 mm) wire, and 40-pin ribbons of female-female, female-male and male-male jumpers with 10-strand copper conductors.

    Tie points
    2 × 830-point and 2 × 400-point breadboards, fifth bullet
    Power rails
    Absent from the listing
    Contact quality
    Neat pin holes; metal pins that do not bend easily, first bullet
    Backing
    Absent from the listing
    Wire types and lengths
    40-pin F2F, F2M and M2M ribbons, fifth bullet; 21 cm in the title; 10-strand braided copper in plastic sleeving, third bullet
    Gauge
    Boards accept 20–29 AWG (0.3–0.8 mm) wire, second bullet
    Pack contents
    2 × 830 and 2 × 400 breadboards, 3 × 40-pin jumper ribbons, fifth bullet
    Amazon reference
    B0B5TCKTQH (same reference on 5 Amazon marketplaces)
    EAN
    0762917155524
    • Four breadboards
    • Wire range the boards take: 20–29 AWG
    • Jumper length only in the title

    Best for: A classroom or maker who keeps several circuits built at once.

    ≈ £13 / 13 €
    Check price on Amazon
  • Six spools of wire in black, blue, green, white, yellow and red on a TUOFENG box

    TUOFENG 22 AWG UL1007 solid hook-up wire, 6 colours × 9 m

    Six 9 m spools of 22 AWG UL1007 solid hook-up wire from TUOFENG, tinned copper in 0.010 in PVC insulation rated 300 V and 80 °C with a VW-1 flame rating, in red, black, green, yellow, blue and white.

    Tie points
    Absent from the listing — wire only
    Power rails
    Absent from the listing
    Contact quality
    Solid tinned copper conductor, first and fifth bullets
    Backing
    Absent from the listing
    Wire types and lengths
    Solid hook-up wire, 6 spools of 9 m (30 ft), fifth bullet
    Gauge
    22 AWG, 0.32 mm², title and first bullet
    Pack contents
    6 spools: red, black, green, yellow, blue, white, fifth bullet; PVC 0.010 in, 300 V, 80 °C, VW-1, second and fourth bullets
    Amazon reference
    B07V5FVSYL (same reference on 5 Amazon marketplaces)
    EAN
    0607994214750
    • Ratings given: 300 V, 80 °C, VW-1
    • Solid 22 AWG, a common breadboard size
    • Must be cut and stripped

    Best for: A maker who cuts jumpers to exact length for neat breadboard and perfboard wiring.

    ≈ £16 / 18 €
    Check price on Amazon
  • An 830-point and a 400-point breadboard, a bundle of flexible jumpers, a box of colour-coded U-shaped jumpers and tweezers

    Aypzuke Breadboard kit: 830 and 400 boards, 140 U-shaped jumpers in 14 lengths, 65 flexible wires, tweezers

    A breadboard kit from Aypzuke with an 830-point and a 400-point board in ABS with nickel-plated phosphor bronze contacts, 140 U-shaped 24 AWG male-to-male jumpers in 14 lengths from 2 to 125 mm, 65 flexible jumper wires and tweezers, packed in a box.

    Tie points
    1 × 830-point and 1 × 400-point breadboard, first and second bullets
    Power rails
    Absent from the listing
    Contact quality
    Nickel-plated phosphor bronze contact strips, second bullet
    Backing
    Absent from the listing — ABS plastic boards, second bullet
    Wire types and lengths
    140 U-shaped male-to-male jumpers in 14 lengths: 2, 5, 7, 10, 12, 15, 17, 20, 22, 25, 50, 75, 100 and 125 mm; 65 flexible jumper wires, first and third bullets
    Gauge
    24 AWG for the U-shaped jumpers, third bullet
    Pack contents
    2 breadboards, 140 U-shaped jumpers, 65 flexible wires, tweezers, box, first bullet
    Amazon reference
    B0BMFXPSVG (same reference on 6 Amazon marketplaces)
    EAN
    0760627267377
    • Fourteen pre-bent jumper lengths, each listed
    • Two boards, 830 and 400 points
    • Flexible wires not described beyond their count

    Best for: A maker who wants tidy, flat wiring on the board with jumpers cut to length.

    ≈ $10 / £10 / 9 €
    Check price on Amazon

Elsewhere on the workbench

  • Ten bright steel 4-flute end mills from 2 to 12 mm, shanks stamped SWT with sizes and HSS-AL

    AFUNTA HSS 4-flute end mill set, titanium coated, 10 pieces, 2–12 mm

    Ten 4-flute high-speed steel end mills from AFUNTA with titanium coating, straight shanks and a U-shaped flute with a large rake angle, from 2 to 12 mm, for side, end and face milling of steels, cast iron and titanium.

    Shank diameter
    Absent from the listing — straight shank, title
    Cutting diameter and length
    2, 3, 4, 5, 6, 7, 8, 9, 10 and 12 mm, fifth bullet; no lengths
    Flute count
    4 flutes, title
    Helix direction
    Absent from the listing — U-shaped flute with a large rake angle, third bullet
    End shape
    Absent from the listing
    Coating
    Titanium coating on high-speed steel, second and fourth bullets; the cutters in the product photograph show bright steel with no coating colour
    Material suitability
    Carbon, alloy, die and tool steels, cast iron and titanium, first bullet; wood and aluminium in the title
    Amazon reference
    B07DQL66VF (same reference on 6 Amazon marketplaces)
    EAN
    0783710282415
    • Titanium coating stated
    • Flute shape described: U-shaped, large rake angle
    • No shank sizes or lengths

    Best for: A benchtop mill owner cutting steel who wants coated HSS in common sizes.

    ≈ $17 / £19 / 21 €
    Check price on Amazon
  • Eight dark-coated 4-flute end mills standing in blue plastic caps, one in a clear tube

    ASZLBYM Carbide 4-flute end mill set, 8 pieces, 2–12 mm

    Eight 4-flute end mills from ASZLBYM in tungsten carbide stated at HRC45, from 2 to 12 mm, with a negative rake edge, a large core for rigidity and large flutes for chip clearance, sold for metalworking and CNC machining, with HSS also in the title.

    Shank diameter
    Absent from the listing
    Cutting diameter and length
    2, 3, 4, 5, 6, 8, 10 and 12 mm, first bullet; no lengths
    Flute count
    4 flutes, title
    Helix direction
    Absent from the listing — spiral cutter in the title
    End shape
    Square (“Vierkant”), fourth bullet
    Coating
    Absent from the listing text — tungsten carbide stated at HRC45, second bullet, “HSS” also in the title; the product photograph shows dark-coated flutes
    Material suitability
    Metalworking, CNC machining and mechanical engineering, fourth bullet
    Amazon reference
    B0C55FBCNP (same reference on 6 Amazon marketplaces)
    EAN
    0739240119172
    • Tungsten carbide described, with its composition
    • Large core and large flutes, as the third and fourth bullets say
    • HSS and carbide both in the title

    Best for: A benchtop mill owner who wants carbide cutters and can confirm the material and shank sizes on arrival.

    ≈ 52 €
    Check price on Amazon
  • Ten bright steel 4-flute end mills from 2 to 12 mm beside a blue case, shanks stamped SWT with sizes and HSS-AL

    ASNOMY HSS 4-flute end mill set, 10 pieces, 2–12 mm

    Ten 4-flute high-speed steel end mills from ASNOMY with straight shanks, from 2 to 12 mm, for profile, shoulder and finish milling of ferrous and non-ferrous metals, plastics and wood.

    Shank diameter
    Absent from the listing text — the shanks in the product photograph are stamped with 6, 8, 10 and 12 mm shank sizes, as in 12×12×26×83
    Cutting diameter and length
    2, 3, 4, 5, 6, 7, 8, 9, 10 and 12 mm, second bullet; lengths only on the stamped shanks in the photograph
    Flute count
    4 flutes, title
    Helix direction
    Absent from the listing — spiral cutter in the title
    End shape
    Absent from the listing
    Coating
    Absent from the listing — high-speed steel, first bullet
    Material suitability
    Aluminium, cast iron, copper, magnesium alloys, plastics and wood, third bullet
    Amazon reference
    B089VWBZY2 (same reference on 6 Amazon marketplaces)
    EAN
    0747045238394
    • Sizes up to 12 mm
    • Milling operations named: profile, shoulder and finishing
    • No shank sizes or lengths

    Best for: A benchtop milling machine owner who needs larger cutters than a desktop router collet takes.

    ≈ $16 / £15 / 19 €
    Check price on Amazon

All breadboards and jumper wires