Skip to content

Four boards and three ribbons

HUAREW Breadboard kit: 2 × 830 and 2 × 400 boards, 40-pin F-F, F-M and M-M jumper ribbons

A breadboard kit from HUAREW with two 830-point and two 400-point breadboards that take 20–29 AWG (0.3–0.8 mm) wire, and 40-pin ribbons of female-female, female-male and male-male jumpers with 10-strand copper conductors.

Two 400-point and two 830-point breadboards beside three rainbow jumper ribbons

HUAREW Breadboard kit: 2 × 830 and 2 × 400 boards, 40-pin F-F, F-M and M-M jumper ribbons

A breadboard kit from HUAREW with two 830-point and two 400-point breadboards that take 20–29 AWG (0.3–0.8 mm) wire, and 40-pin ribbons of female-female, female-male and male-male jumpers with 10-strand copper conductors.

Tie points
2 × 830-point and 2 × 400-point breadboards, fifth bullet
Power rails
Absent from the listing
Contact quality
Neat pin holes; metal pins that do not bend easily, first bullet
Backing
Absent from the listing
Wire types and lengths
40-pin F2F, F2M and M2M ribbons, fifth bullet; 21 cm in the title; 10-strand braided copper in plastic sleeving, third bullet
Gauge
Boards accept 20–29 AWG (0.3–0.8 mm) wire, second bullet
Pack contents
2 × 830 and 2 × 400 breadboards, 3 × 40-pin jumper ribbons, fifth bullet
Amazon reference
B0B5TCKTQH (same reference on 5 Amazon marketplaces)
EAN
0762917155524
  • Four breadboards
  • Wire range the boards take: 20–29 AWG
  • Jumper length only in the title

Best for: A classroom or maker who keeps several circuits built at once.

≈ £13 / 13 €
Check price on Amazon

Specifications

Tie points
2 × 830-point and 2 × 400-point breadboards, fifth bullet
Power rails
Absent from the listing
Contact quality
Neat pin holes; metal pins that do not bend easily, first bullet
Backing
Absent from the listing
Wire types and lengths
40-pin F2F, F2M and M2M ribbons, fifth bullet; 21 cm in the title; 10-strand braided copper in plastic sleeving, third bullet
Gauge
Boards accept 20–29 AWG (0.3–0.8 mm) wire, second bullet
Pack contents
2 × 830 and 2 × 400 breadboards, 3 × 40-pin jumper ribbons, fifth bullet
Amazon reference
B0B5TCKTQH (same reference on 5 Amazon marketplaces)
EAN
0762917155524

The HUAREW kit listing, bullet by bullet

Five bullets: good materials, neat holes and pins that do not bend easily; breadboards that take 20–29 AWG (0.3–0.8 mm) wire; jumper terminals with a stable plastic sleeve and ten braided copper strands; use by students, engineers and technicians; and two each of 830- and 400-point boards with 40-pin F2F, F2M and M2M jumpers.

HUAREW gives the wire range

20 to 29 AWG. A breadboard contact grips a range of wire diameters. Too thin and it will not hold; too thick and it spreads the clip. The second bullet states the range.

HUAREW’s jumper length

21 cm appears in the title only. The fifth bullet gives the types and pin count, not the length.

Availability

At the last look-up, the German, French, Italian and Spanish Amazon stores were asking 13 € to 15 €.

It is sold in the British Amazon store as well, in its own currency, which the euro figures above leave out on purpose.

The American Amazon store returned no entry, so the buy button there opens a search rather than a missing page.

Every figure here is Keepa’s reading on the date this page was last updated. Stock and prices can change at any time.

Prices quoted in this text were read on 15 September 2026. The live price is at the top of the page.

More breadboards and jumper wires

  • Six spools of wire in black, blue, green, white, yellow and red on a TUOFENG box

    TUOFENG 22 AWG UL1007 solid hook-up wire, 6 colours × 9 m

    Six 9 m spools of 22 AWG UL1007 solid hook-up wire from TUOFENG, tinned copper in 0.010 in PVC insulation rated 300 V and 80 °C with a VW-1 flame rating, in red, black, green, yellow, blue and white.

    Tie points
    Absent from the listing — wire only
    Power rails
    Absent from the listing
    Contact quality
    Solid tinned copper conductor, first and fifth bullets
    Backing
    Absent from the listing
    Wire types and lengths
    Solid hook-up wire, 6 spools of 9 m (30 ft), fifth bullet
    Gauge
    22 AWG, 0.32 mm², title and first bullet
    Pack contents
    6 spools: red, black, green, yellow, blue, white, fifth bullet; PVC 0.010 in, 300 V, 80 °C, VW-1, second and fourth bullets
    Amazon reference
    B07V5FVSYL (same reference on 5 Amazon marketplaces)
    EAN
    0607994214750
    • Ratings given: 300 V, 80 °C, VW-1
    • Solid 22 AWG, a common breadboard size
    • Must be cut and stripped

    Best for: A maker who cuts jumpers to exact length for neat breadboard and perfboard wiring.

    ≈ £16 / 18 €
    Check price on Amazon
  • An 830-point and a 400-point breadboard, a bundle of flexible jumpers, a box of colour-coded U-shaped jumpers and tweezers

    Aypzuke Breadboard kit: 830 and 400 boards, 140 U-shaped jumpers in 14 lengths, 65 flexible wires, tweezers

    A breadboard kit from Aypzuke with an 830-point and a 400-point board in ABS with nickel-plated phosphor bronze contacts, 140 U-shaped 24 AWG male-to-male jumpers in 14 lengths from 2 to 125 mm, 65 flexible jumper wires and tweezers, packed in a box.

    Tie points
    1 × 830-point and 1 × 400-point breadboard, first and second bullets
    Power rails
    Absent from the listing
    Contact quality
    Nickel-plated phosphor bronze contact strips, second bullet
    Backing
    Absent from the listing — ABS plastic boards, second bullet
    Wire types and lengths
    140 U-shaped male-to-male jumpers in 14 lengths: 2, 5, 7, 10, 12, 15, 17, 20, 22, 25, 50, 75, 100 and 125 mm; 65 flexible jumper wires, first and third bullets
    Gauge
    24 AWG for the U-shaped jumpers, third bullet
    Pack contents
    2 breadboards, 140 U-shaped jumpers, 65 flexible wires, tweezers, box, first bullet
    Amazon reference
    B0BMFXPSVG (same reference on 6 Amazon marketplaces)
    EAN
    0760627267377
    • Fourteen pre-bent jumper lengths, each listed
    • Two boards, 830 and 400 points
    • Flexible wires not described beyond their count

    Best for: A maker who wants tidy, flat wiring on the board with jumpers cut to length.

    ≈ $10 / £10 / 9 €
    Check price on Amazon
  • Ten silicone leads in red, black, yellow, green and blue pairs, stackable banana plugs at one end and pins at the other

    Cleqee Stackable banana plug to breadboard male jumper leads, 10 pieces, silicone

    Ten test leads from Cleqee with soft silicone insulation, about 27.2 cm long, each with a stackable banana plug at one end and a male breadboard jumper pin at the other, in five colours, for connecting power supplies, multimeters and LED strips to a breadboard.

    Tie points
    Absent from the listing — leads only
    Power rails
    Absent from the listing
    Contact quality
    Stackable banana plugs; pure copper male breadboard pins, second and third bullets
    Backing
    Absent from the listing
    Wire types and lengths
    Banana plug to male breadboard pin, about 27.2 cm, silicone insulation, first, third and fifth bullets
    Gauge
    Absent from the listing
    Pack contents
    10 leads in 5 colours, fifth bullet
    Amazon reference
    B08Q7PXVL9 (same reference on 5 Amazon marketplaces)
    EAN
    0784110446100
    • Stackable banana plugs
    • Soft silicone insulation
    • No gauge or current rating

    Best for: A maker powering a breadboard from a bench power supply or probing it with a multimeter.

    ≈ £9 / 10 €
    Check price on Amazon

Elsewhere on the workbench

  • Eight dark-coated 4-flute end mills standing in blue plastic caps, one in a clear tube

    ASZLBYM Carbide 4-flute end mill set, 8 pieces, 2–12 mm

    Eight 4-flute end mills from ASZLBYM in tungsten carbide stated at HRC45, from 2 to 12 mm, with a negative rake edge, a large core for rigidity and large flutes for chip clearance, sold for metalworking and CNC machining, with HSS also in the title.

    Shank diameter
    Absent from the listing
    Cutting diameter and length
    2, 3, 4, 5, 6, 8, 10 and 12 mm, first bullet; no lengths
    Flute count
    4 flutes, title
    Helix direction
    Absent from the listing — spiral cutter in the title
    End shape
    Square (“Vierkant”), fourth bullet
    Coating
    Absent from the listing text — tungsten carbide stated at HRC45, second bullet, “HSS” also in the title; the product photograph shows dark-coated flutes
    Material suitability
    Metalworking, CNC machining and mechanical engineering, fourth bullet
    Amazon reference
    B0C55FBCNP (same reference on 6 Amazon marketplaces)
    EAN
    0739240119172
    • Tungsten carbide described, with its composition
    • Large core and large flutes, as the third and fourth bullets say
    • HSS and carbide both in the title

    Best for: A benchtop mill owner who wants carbide cutters and can confirm the material and shank sizes on arrival.

    ≈ 52 €
    Check price on Amazon
  • Ten bright steel 4-flute end mills from 2 to 12 mm beside a blue case, shanks stamped SWT with sizes and HSS-AL

    ASNOMY HSS 4-flute end mill set, 10 pieces, 2–12 mm

    Ten 4-flute high-speed steel end mills from ASNOMY with straight shanks, from 2 to 12 mm, for profile, shoulder and finish milling of ferrous and non-ferrous metals, plastics and wood.

    Shank diameter
    Absent from the listing text — the shanks in the product photograph are stamped with 6, 8, 10 and 12 mm shank sizes, as in 12×12×26×83
    Cutting diameter and length
    2, 3, 4, 5, 6, 7, 8, 9, 10 and 12 mm, second bullet; lengths only on the stamped shanks in the photograph
    Flute count
    4 flutes, title
    Helix direction
    Absent from the listing — spiral cutter in the title
    End shape
    Absent from the listing
    Coating
    Absent from the listing — high-speed steel, first bullet
    Material suitability
    Aluminium, cast iron, copper, magnesium alloys, plastics and wood, third bullet
    Amazon reference
    B089VWBZY2 (same reference on 6 Amazon marketplaces)
    EAN
    0747045238394
    • Sizes up to 12 mm
    • Milling operations named: profile, shoulder and finishing
    • No shank sizes or lengths

    Best for: A benchtop milling machine owner who needs larger cutters than a desktop router collet takes.

    ≈ $16 / £15 / 19 €
    Check price on Amazon
  • Ten blue-coated engraving bits on silver shanks, five round-ground V-points and five flat triangular tips

    Genmitsu V-bit and flat engraving bit set, 10 pieces, 1/8 in shank, 20–90°

    Ten engraving bits from Genmitsu on 1/8 in shanks — five flat and five triangular V-bits at 20, 30, 45, 60 and 90° — in alloy steel with a nano blue coating and 0.1 mm tips, for sign making, lettering and V-groove joints in wood, acrylic, PCB and aluminium.

    Shank diameter
    1/8 in, title and first bullet
    Cutting diameter and length
    0.1 mm tip; angles of 20, 30, 45, 60 and 90°, first and fourth bullets; no lengths
    Flute count
    Absent from the listing
    Helix direction
    Absent from the listing
    End shape
    Five flat and five triangular V-bits, first bullet
    Coating
    Nano blue coating, third bullet; alloy steel, second bullet
    Material suitability
    Hardwood, plywood, acrylic, plastic laminate, resin, PCB and aluminium, fifth bullet
    Amazon reference
    B0C7KPDWY4 (same reference on 6 Amazon marketplaces)
    EAN
    0816550027363
    • Five angles from 20 to 90°, in two tip shapes
    • A 1/8 in shank, the collet size stated for the Genmitsu router reviewed on this site
    • Alloy steel, not carbide

    Best for: A desktop CNC owner with a 1/8 in collet starting on signs, lettering and PCB isolation.

    ≈ $26 / £22 / 27 €
    Check price on Amazon

All breadboards and jumper wires