Skip to content

Pre-bent jumpers, lengths listed

Aypzuke Breadboard kit: 830 and 400 boards, 140 U-shaped jumpers in 14 lengths, 65 flexible wires, tweezers

A breadboard kit from Aypzuke with an 830-point and a 400-point board in ABS with nickel-plated phosphor bronze contacts, 140 U-shaped 24 AWG male-to-male jumpers in 14 lengths from 2 to 125 mm, 65 flexible jumper wires and tweezers, packed in a box.

An 830-point and a 400-point breadboard, a bundle of flexible jumpers, a box of colour-coded U-shaped jumpers and tweezers

Aypzuke Breadboard kit: 830 and 400 boards, 140 U-shaped jumpers in 14 lengths, 65 flexible wires, tweezers

A breadboard kit from Aypzuke with an 830-point and a 400-point board in ABS with nickel-plated phosphor bronze contacts, 140 U-shaped 24 AWG male-to-male jumpers in 14 lengths from 2 to 125 mm, 65 flexible jumper wires and tweezers, packed in a box.

Tie points
1 × 830-point and 1 × 400-point breadboard, first and second bullets
Power rails
Absent from the listing
Contact quality
Nickel-plated phosphor bronze contact strips, second bullet
Backing
Absent from the listing — ABS plastic boards, second bullet
Wire types and lengths
140 U-shaped male-to-male jumpers in 14 lengths: 2, 5, 7, 10, 12, 15, 17, 20, 22, 25, 50, 75, 100 and 125 mm; 65 flexible jumper wires, first and third bullets
Gauge
24 AWG for the U-shaped jumpers, third bullet
Pack contents
2 breadboards, 140 U-shaped jumpers, 65 flexible wires, tweezers, box, first bullet
Amazon reference
B0BMFXPSVG (same reference on 6 Amazon marketplaces)
EAN
0760627267377
  • Fourteen pre-bent jumper lengths, each listed
  • Two boards, 830 and 400 points
  • Flexible wires not described beyond their count

Best for: A maker who wants tidy, flat wiring on the board with jumpers cut to length.

≈ $10 / £10 / 9 €
Check price on Amazon

Specifications

Tie points
1 × 830-point and 1 × 400-point breadboard, first and second bullets
Power rails
Absent from the listing
Contact quality
Nickel-plated phosphor bronze contact strips, second bullet
Backing
Absent from the listing — ABS plastic boards, second bullet
Wire types and lengths
140 U-shaped male-to-male jumpers in 14 lengths: 2, 5, 7, 10, 12, 15, 17, 20, 22, 25, 50, 75, 100 and 125 mm; 65 flexible jumper wires, first and third bullets
Gauge
24 AWG for the U-shaped jumpers, third bullet
Pack contents
2 breadboards, 140 U-shaped jumpers, 65 flexible wires, tweezers, box, first bullet
Amazon reference
B0BMFXPSVG (same reference on 6 Amazon marketplaces)
EAN
0760627267377

The Aypzuke breadboard kit listing, bullet by bullet

Four bullets: a 400-point and an 830-point board, 140 U-shaped jumpers, 65 flexible jumpers and tweezers in a box; ABS boards with nickel-plated phosphor bronze contacts; 140 U-shaped 24 AWG male-to-male jumpers in 14 lengths from 2 to 125 mm; and prototyping for shields and DIY projects.

Aypzuke’s pre-bent jumpers

Fourteen lengths, flat to the board. U-shaped jumpers lie flat, so a circuit stays readable and nothing snags. Pre-cut lengths from 2 to 125 mm cover neighbouring holes to the far side of the board.

Aypzuke’s two boards

An 830-point board for the main circuit and a 400-point board for a sub-circuit or a second test. The flexible wires link the two.

Availability

At the last look-up, the German and French Amazon stores were asking 9 € to 13 €.

It is sold in the American and British Amazon stores as well, in their own currency, which the euro figures above leave out on purpose.

Asking prices on the Italian and Spanish Amazon stores ran past 1.6× the lowest country’s. A gap that size points to goods shipped in from abroad rather than a local seller, so those offers are left out of the figures above.

Every figure here is Keepa’s reading on the date this page was last updated. Stock and prices can change at any time.

Prices quoted in this text were read on 15 September 2026. The live price is at the top of the page.

More breadboards and jumper wires

  • Ten silicone leads in red, black, yellow, green and blue pairs, stackable banana plugs at one end and pins at the other

    Cleqee Stackable banana plug to breadboard male jumper leads, 10 pieces, silicone

    Ten test leads from Cleqee with soft silicone insulation, about 27.2 cm long, each with a stackable banana plug at one end and a male breadboard jumper pin at the other, in five colours, for connecting power supplies, multimeters and LED strips to a breadboard.

    Tie points
    Absent from the listing — leads only
    Power rails
    Absent from the listing
    Contact quality
    Stackable banana plugs; pure copper male breadboard pins, second and third bullets
    Backing
    Absent from the listing
    Wire types and lengths
    Banana plug to male breadboard pin, about 27.2 cm, silicone insulation, first, third and fifth bullets
    Gauge
    Absent from the listing
    Pack contents
    10 leads in 5 colours, fifth bullet
    Amazon reference
    B08Q7PXVL9 (same reference on 5 Amazon marketplaces)
    EAN
    0784110446100
    • Stackable banana plugs
    • Soft silicone insulation
    • No gauge or current rating

    Best for: A maker powering a breadboard from a bench power supply or probing it with a multimeter.

    ≈ £9 / 10 €
    Check price on Amazon
  • Long white solderless breadboard with red and blue rail lines along both edges, beside a bundle of flexible jumper wires

    CyConncet Solderless breadboard 5.4 × 16.5 cm with two distribution strips

    A solderless breadboard from CyConncet, 5.4 × 16.5 × 0.85 cm in ABS, with nickel-plated phosphor bronze spring clips, two distribution strips, top and bottom rows connected horizontally and the rest vertically, for 0.8 mm jumper wires, and joinable with other units.

    Tie points
    Two distribution strips, 200 jacks, first bullet
    Power rails
    Top and bottom rows connected horizontally and split in the middle, fourth bullet
    Contact quality
    Nickel-plated phosphor bronze spring clips, first bullet
    Backing
    Absent from the listing — ABS plastic, joinable by units, second and fifth bullets
    Wire types and lengths
    Absent from the listing — matching jumper wire diameter 0.8 mm, first and second bullets
    Gauge
    0.8 mm wire diameter, second bullet
    Pack contents
    Absent from the listing text — board size 5.4 × 16.5 × 0.85 cm, first bullet; the product photograph shows the board with a bundle of flexible jumper wires
    Amazon reference
    B0D3BZBHVS (same reference on 6 Amazon marketplaces)
    EAN
    0784633677708
    • Nickel-plated phosphor bronze contacts
    • Board size given: 5.4 × 16.5 × 0.85 cm
    • Rails split in the middle

    Best for: A beginner prototyping small circuits who may join boards together later.

    ≈ 5 €
    Check price on Amazon
  • Three rainbow jumper wire ribbons, one long and two short, with pin and socket ends

    GERUI Jumper wires 120 pieces, M-F, M-M and F-F, 10 and 20 cm, 28 AWG

    Three 40-wire ribbons of jumper wires from GERUI — male to female, male to male and female to female — in 10 and 20 cm lengths, 28 AWG with PVC insulation and 2.54 mm pitch ends, separable into single wires.

    Tie points
    Absent from the listing — wires only
    Power rails
    Absent from the listing
    Contact quality
    Small pins and sockets for 2.54 mm pitch, holding firmly, third and fifth bullets
    Backing
    Absent from the listing
    Wire types and lengths
    40 male-female, 40 male-male and 40 female-female; 10 cm and 20 cm, first and second bullets
    Gauge
    28 AWG, title
    Pack contents
    3 ribbons of 40 wires, 120 in all, title and second bullet
    Amazon reference
    B0DGBYR2YL (same reference on 6 Amazon marketplaces)
    EAN
    0744243857648
    • All three end types
    • Two lengths: 10 and 20 cm
    • “Male to Female” in the title, three types in the box

    Best for: A maker wiring modules to a board or single-board computer GPIO header.

    ≈ 6 €
    Check price on Amazon

Elsewhere on the workbench

  • MXMONK round gold textured PEI plate in front of a round black sheet

    MXMONK Round textured PEI plate 220 mm for FLSUN Q5, with magnetic base

    A round 220 mm spring steel plate from MXMONK with textured PEI powder coating on both sides, made only for the FLSUN Q5 delta printer and supplied with a self-adhesive magnetic sheet.

    Size and fit
    220 mm diameter, round, exclusively for the FLSUN Q5, first bullet; the title gives 220 × 220 mm, and the product photograph shows a round plate
    Substrate
    Spring steel, title and first and fifth bullets
    Surface type
    Textured PEI powder coating on both sides, matte finish, fifth bullet
    Magnetic base
    Strong self-adhesive magnetic sheet (B side) included, sixth bullet
    Filament suitability
    Absent from the listing
    Heat limit
    Absent from the listing — “extreme heat resistance” without a figure, third bullet
    Amazon reference
    B0FWD37X59 (same reference on 5 Amazon marketplaces)
    EAN
    0381504927452
    • The only plate of the five that lists a magnetic sheet in the box
    • Made for a round delta bed, the FLSUN Q5
    • Only for the FLSUN Q5

    Best for: A FLSUN Q5 owner who wants a removable magnetic PEI surface on the original heated bed.

    ≈ $30 / 35 €
    Check price on Amazon
  • TIOPY gold textured PEI spring steel plate with a handling tab

    TIOPY PEI spring steel plate 257 × 257 mm for Bambu Lab 3D printers

    A 257 × 257 mm PEI spring steel plate from TIOPY for Bambu Lab X1, P1, P2S and A1 printers, carrying no QR code, so the printer’s plate detection has to be turned off; its PEI is called smooth in the title and textured in the bullets.

    Size and fit
    257 × 257 mm for Bambu Lab X2D, X1, X1C, X1E, P1P, P1S, P2S and A1, title and first bullet
    Substrate
    Spring steel, title and second and fourth bullets
    Surface type
    “Smooth PEI” in the title; double-sided textured PEI in the first, fourth and fifth bullets, frosted PEI surface in the second; the product photograph shows a gold textured face
    Magnetic base
    Absent from the listing
    Filament suitability
    PLA, flexible, wood, ABS, PC, PETG, TPU and nylon, second bullet
    Heat limit
    Can be heated to over 200 °C, second bullet; no upper limit given
    Amazon reference
    B0CBH3B8GT (same reference on 6 Amazon marketplaces)
    EAN
    0738260308610
    • A plain instruction that the plate has no QR code and plate detection must be disabled
    • Named for the Bambu Lab X1, P1, P2S and A1 series
    • Smooth in the title, textured in the bullets

    Best for: A Bambu Lab X1, P1 or A1 owner who wants a spare PEI plate and can do without automatic plate detection.

    ≈ 14 €
    Check price on Amazon
  • UniTak3D PEI plate, black textured face marked PEI Texture and smooth face marked PEI Smooth

    UniTak3D Double-sided PEI plate 235 × 235 mm, smooth and textured

    A double-sided 235 × 235 mm spring steel plate from UniTak3D with textured PEI rated to 300 °C on one side and smooth PEI rated to 200 °C on the other, for Creality printers from the Ender 3 to the K1C.

    Size and fit
    235 × 235 mm with a 220 × 220 mm maximum print area; Creality K1C, K1, Ender 3 V3, V3 SE, V3 KE, CR-10 SE, Ender 3 series, CR 20 and Ender 5 among the printers named, fourth and sixth bullets
    Substrate
    Spring steel sheet, second bullet
    Surface type
    Double-sided: textured black PEI and smooth PEI, real PEI powder coating, title and first three bullets
    Magnetic base
    Absent from the listing
    Filament suitability
    PLA, ABS, ASA, PETG, TPU, nylon, PA and PC; glue stick advised on the smooth side for everything except PLA, third and fifth bullets
    Heat limit
    Textured side to 300 °C, smooth side to 200 °C, third bullet
    Amazon reference
    B08L39BFVJ (same reference on 6 Amazon marketplaces)
    EAN
    0605175679800
    • Separate heat limits for each side: 300 °C textured, 200 °C smooth
    • A long list of Creality printers, including the K1C reviewed on this site
    • No magnetic base mentioned anywhere in the listing

    Best for: A Creality K1C or Ender 3 owner who wants textured PEI for grip and smooth PEI for smooth first layers.

    ≈ £17 / 14 €
    Check price on Amazon

All breadboards and jumper wires