Skip to content

Round, for a delta, with its magnet

MXMONK Round textured PEI plate 220 mm for FLSUN Q5, with magnetic base

A round 220 mm spring steel plate from MXMONK with textured PEI powder coating on both sides, made only for the FLSUN Q5 delta printer and supplied with a self-adhesive magnetic sheet.

MXMONK round gold textured PEI plate in front of a round black sheet

MXMONK Round textured PEI plate 220 mm for FLSUN Q5, with magnetic base

A round 220 mm spring steel plate from MXMONK with textured PEI powder coating on both sides, made only for the FLSUN Q5 delta printer and supplied with a self-adhesive magnetic sheet.

Size and fit
220 mm diameter, round, exclusively for the FLSUN Q5, first bullet; the title gives 220 × 220 mm, and the product photograph shows a round plate
Substrate
Spring steel, title and first and fifth bullets
Surface type
Textured PEI powder coating on both sides, matte finish, fifth bullet
Magnetic base
Strong self-adhesive magnetic sheet (B side) included, sixth bullet
Filament suitability
Absent from the listing
Heat limit
Absent from the listing — “extreme heat resistance” without a figure, third bullet
Amazon reference
B0FWD37X59 (same reference on 5 Amazon marketplaces)
EAN
0381504927452
  • The only plate of the five that lists a magnetic sheet in the box
  • Made for a round delta bed, the FLSUN Q5
  • Only for the FLSUN Q5

Best for: A FLSUN Q5 owner who wants a removable magnetic PEI surface on the original heated bed.

≈ $30 / 35 €
Check price on Amazon

Specifications

Size and fit
220 mm diameter, round, exclusively for the FLSUN Q5, first bullet; the title gives 220 × 220 mm, and the product photograph shows a round plate
Substrate
Spring steel, title and first and fifth bullets
Surface type
Textured PEI powder coating on both sides, matte finish, fifth bullet
Magnetic base
Strong self-adhesive magnetic sheet (B side) included, sixth bullet
Filament suitability
Absent from the listing
Heat limit
Absent from the listing — “extreme heat resistance” without a figure, third bullet
Amazon reference
B0FWD37X59 (same reference on 5 Amazon marketplaces)
EAN
0381504927452

The MXMONK FLSUN Q5 plate listing, bullet by bullet

Six bullets: a round spring steel plate of 220 mm diameter, only for the FLSUN Q5, fitting its original heated bed without adjustment; good bed adhesion and tool-free release by hand after cooling; a strong hold on magnetic surfaces, heat resistance and flatness; PEI that survives repeated heating cycles; double-sided textured PEI powder coating with a matte finish; and a strong self-adhesive magnetic sheet included.

The MXMONK plate is round, not square

The title says 220 × 220 mm; the first bullet describes a round plate of 220 mm diameter. Delta printers have round beds, and the product photograph agrees with the first bullet: the plate is a disc.

The MXMONK magnetic system

The self-adhesive magnetic sheet mounts on the heated bed and the PEI plate sits on it. MXMONK calls the pair a complete magnetic system, and it is the only plate of the five that puts both parts in the box.

Availability

At the last look-up, the German and French Amazon stores were asking roughly 35 €.

It is sold in the American Amazon store as well, in its own currency, which the euro figures above leave out on purpose.

The Italian and Spanish Amazon catalogues list the product, yet no seller was offering it.

The British Amazon store returned no entry, so the buy button there opens a search rather than a missing page.

Every figure here is Keepa’s reading on the date this page was last updated. Stock and prices can change at any time.

Prices quoted in this text were read on 15 September 2026. The live price is at the top of the page.

More build plates

  • TIOPY gold textured PEI spring steel plate with a handling tab

    TIOPY PEI spring steel plate 257 × 257 mm for Bambu Lab 3D printers

    A 257 × 257 mm PEI spring steel plate from TIOPY for Bambu Lab X1, P1, P2S and A1 printers, carrying no QR code, so the printer’s plate detection has to be turned off; its PEI is called smooth in the title and textured in the bullets.

    Size and fit
    257 × 257 mm for Bambu Lab X2D, X1, X1C, X1E, P1P, P1S, P2S and A1, title and first bullet
    Substrate
    Spring steel, title and second and fourth bullets
    Surface type
    “Smooth PEI” in the title; double-sided textured PEI in the first, fourth and fifth bullets, frosted PEI surface in the second; the product photograph shows a gold textured face
    Magnetic base
    Absent from the listing
    Filament suitability
    PLA, flexible, wood, ABS, PC, PETG, TPU and nylon, second bullet
    Heat limit
    Can be heated to over 200 °C, second bullet; no upper limit given
    Amazon reference
    B0CBH3B8GT (same reference on 6 Amazon marketplaces)
    EAN
    0738260308610
    • A plain instruction that the plate has no QR code and plate detection must be disabled
    • Named for the Bambu Lab X1, P1, P2S and A1 series
    • Smooth in the title, textured in the bullets

    Best for: A Bambu Lab X1, P1 or A1 owner who wants a spare PEI plate and can do without automatic plate detection.

    ≈ 14 €
    Check price on Amazon
  • UniTak3D PEI plate, black textured face marked PEI Texture and smooth face marked PEI Smooth

    UniTak3D Double-sided PEI plate 235 × 235 mm, smooth and textured

    A double-sided 235 × 235 mm spring steel plate from UniTak3D with textured PEI rated to 300 °C on one side and smooth PEI rated to 200 °C on the other, for Creality printers from the Ender 3 to the K1C.

    Size and fit
    235 × 235 mm with a 220 × 220 mm maximum print area; Creality K1C, K1, Ender 3 V3, V3 SE, V3 KE, CR-10 SE, Ender 3 series, CR 20 and Ender 5 among the printers named, fourth and sixth bullets
    Substrate
    Spring steel sheet, second bullet
    Surface type
    Double-sided: textured black PEI and smooth PEI, real PEI powder coating, title and first three bullets
    Magnetic base
    Absent from the listing
    Filament suitability
    PLA, ABS, ASA, PETG, TPU, nylon, PA and PC; glue stick advised on the smooth side for everything except PLA, third and fifth bullets
    Heat limit
    Textured side to 300 °C, smooth side to 200 °C, third bullet
    Amazon reference
    B08L39BFVJ (same reference on 6 Amazon marketplaces)
    EAN
    0605175679800
    • Separate heat limits for each side: 300 °C textured, 200 °C smooth
    • A long list of Creality printers, including the K1C reviewed on this site
    • No magnetic base mentioned anywhere in the listing

    Best for: A Creality K1C or Ender 3 owner who wants textured PEI for grip and smooth PEI for smooth first layers.

    ≈ £17 / 14 €
    Check price on Amazon
  • YOOPAI green plate printed PLA/PETG and Cool Plate Ultra Tack along its front edge

    YOOPAI Cold plate 257 × 257 mm for Bambu Lab 3D printers, with identification code

    A green 257 × 257 mm cold-print plate for Bambu Lab 3D printers that grips PLA at 45–55 °C and PETG at 50–70 °C, with an identification code for the X1C and X1E, a scraper, and a warning against ABS and TPU.

    Size and fit
    257 × 257 mm for Bambu Lab A1, P2S, X2D, P1P, P1S, X1C and X1E, title and fourth bullet
    Substrate
    Flexible steel plate, third bullet
    Surface type
    Textured cold-print surface, green, title and third bullet; identification code for automatic bed levelling on X1C and X1E, fourth bullet
    Magnetic base
    Absent from the listing
    Filament suitability
    PLA at 45–55 °C and PETG at 50–70 °C; not recommended for ABS or TPU, second bullet
    Heat limit
    Absent from the listing
    Amazon reference
    B0FNMPXGFP (same reference on 6 Amazon marketplaces)
    EAN
    0850078714053
    • Bed temperatures given per material: PLA 45–55 °C, PETG 50–70 °C
    • An identification code for X1C and X1E automatic bed levelling
    • Not recommended for ABS or TPU

    Best for: A Bambu Lab 3D printer owner printing large PLA and PETG parts who wants lower bed temperatures and less warping.

    ≈ $18 / £18 / 15 €
    Check price on Amazon

Elsewhere on the workbench

  • Ten bright steel 4-flute end mills from 2 to 12 mm beside a blue case, shanks stamped SWT with sizes and HSS-AL

    ASNOMY HSS 4-flute end mill set, 10 pieces, 2–12 mm

    Ten 4-flute high-speed steel end mills from ASNOMY with straight shanks, from 2 to 12 mm, for profile, shoulder and finish milling of ferrous and non-ferrous metals, plastics and wood.

    Shank diameter
    Absent from the listing text — the shanks in the product photograph are stamped with 6, 8, 10 and 12 mm shank sizes, as in 12×12×26×83
    Cutting diameter and length
    2, 3, 4, 5, 6, 7, 8, 9, 10 and 12 mm, second bullet; lengths only on the stamped shanks in the photograph
    Flute count
    4 flutes, title
    Helix direction
    Absent from the listing — spiral cutter in the title
    End shape
    Absent from the listing
    Coating
    Absent from the listing — high-speed steel, first bullet
    Material suitability
    Aluminium, cast iron, copper, magnesium alloys, plastics and wood, third bullet
    Amazon reference
    B089VWBZY2 (same reference on 6 Amazon marketplaces)
    EAN
    0747045238394
    • Sizes up to 12 mm
    • Milling operations named: profile, shoulder and finishing
    • No shank sizes or lengths

    Best for: A benchtop milling machine owner who needs larger cutters than a desktop router collet takes.

    ≈ $16 / £15 / 19 €
    Check price on Amazon
  • Ten blue-coated engraving bits on silver shanks, five round-ground V-points and five flat triangular tips

    Genmitsu V-bit and flat engraving bit set, 10 pieces, 1/8 in shank, 20–90°

    Ten engraving bits from Genmitsu on 1/8 in shanks — five flat and five triangular V-bits at 20, 30, 45, 60 and 90° — in alloy steel with a nano blue coating and 0.1 mm tips, for sign making, lettering and V-groove joints in wood, acrylic, PCB and aluminium.

    Shank diameter
    1/8 in, title and first bullet
    Cutting diameter and length
    0.1 mm tip; angles of 20, 30, 45, 60 and 90°, first and fourth bullets; no lengths
    Flute count
    Absent from the listing
    Helix direction
    Absent from the listing
    End shape
    Five flat and five triangular V-bits, first bullet
    Coating
    Nano blue coating, third bullet; alloy steel, second bullet
    Material suitability
    Hardwood, plywood, acrylic, plastic laminate, resin, PCB and aluminium, fifth bullet
    Amazon reference
    B0C7KPDWY4 (same reference on 6 Amazon marketplaces)
    EAN
    0816550027363
    • Five angles from 20 to 90°, in two tip shapes
    • A 1/8 in shank, the collet size stated for the Genmitsu router reviewed on this site
    • Alloy steel, not carbide

    Best for: A desktop CNC owner with a 1/8 in collet starting on signs, lettering and PCB isolation.

    ≈ $26 / £22 / 27 €
    Check price on Amazon
  • Five 2-flute spiral cutters with an iridescent rainbow coating and plain silver shanks

    HOZLY Carbide compression end mills, 2 flutes, 4 mm shank, 4 mm × 22 mm, DLC, 5 pieces

    Five 2-flute solid carbide compression end mills from HOZLY with an up-cut and down-cut spiral and DLC coating, a 4 mm shank, 4 mm cutting diameter and 22 mm cutting length, for burr-free edges in wood on CNC routers.

    Shank diameter
    4 mm, title
    Cutting diameter and length
    4 mm diameter, 22 mm cutting edge length, title
    Flute count
    2 flutes, title
    Helix direction
    Up-down compression spiral, title and first and third bullets
    End shape
    Absent from the listing
    Coating
    DLC coating on spiral carbide, title
    Material suitability
    Wood, on CNC routers, woodworking machines and advertising routers, title and fifth bullet
    Amazon reference
    B0B5KY43S8 (same reference on 6 Amazon marketplaces)
    EAN
    0631384621378
    • Shank, diameter and cutting length all given
    • Compression spiral for clean top and bottom edges
    • A 4 mm shank does not fit a 1/8 in collet

    Best for: A CNC router owner with a 4 mm collet cutting plywood parts where both faces show.

    ≈ $42 / £36 / 40 €
    Check price on Amazon

All build plates