Skip to content

Three ends, two lengths

GERUI Jumper wires 120 pieces, M-F, M-M and F-F, 10 and 20 cm, 28 AWG

Three 40-wire ribbons of jumper wires from GERUI — male to female, male to male and female to female — in 10 and 20 cm lengths, 28 AWG with PVC insulation and 2.54 mm pitch ends, separable into single wires.

Three rainbow jumper wire ribbons, one long and two short, with pin and socket ends

GERUI Jumper wires 120 pieces, M-F, M-M and F-F, 10 and 20 cm, 28 AWG

Three 40-wire ribbons of jumper wires from GERUI — male to female, male to male and female to female — in 10 and 20 cm lengths, 28 AWG with PVC insulation and 2.54 mm pitch ends, separable into single wires.

Tie points
Absent from the listing — wires only
Power rails
Absent from the listing
Contact quality
Small pins and sockets for 2.54 mm pitch, holding firmly, third and fifth bullets
Backing
Absent from the listing
Wire types and lengths
40 male-female, 40 male-male and 40 female-female; 10 cm and 20 cm, first and second bullets
Gauge
28 AWG, title
Pack contents
3 ribbons of 40 wires, 120 in all, title and second bullet
Amazon reference
B0DGBYR2YL (same reference on 6 Amazon marketplaces)
EAN
0744243857648
  • All three end types
  • Two lengths: 10 and 20 cm
  • “Male to Female” in the title, three types in the box

Best for: A maker wiring modules to a board or single-board computer GPIO header.

≈ 6 €
Check price on Amazon

Specifications

Tie points
Absent from the listing — wires only
Power rails
Absent from the listing
Contact quality
Small pins and sockets for 2.54 mm pitch, holding firmly, third and fifth bullets
Backing
Absent from the listing
Wire types and lengths
40 male-female, 40 male-male and 40 female-female; 10 cm and 20 cm, first and second bullets
Gauge
28 AWG, title
Pack contents
3 ribbons of 40 wires, 120 in all, title and second bullet
Amazon reference
B0DGBYR2YL (same reference on 6 Amazon marketplaces)
EAN
0744243857648

The GERUI jumper wire listing, bullet by bullet

Five bullets: lengths of 10 and 20 cm, each ribbon of 40 wires that separate; one ribbon each of male-female, male-male and female-female; PVC insulation, described as flame-retardant and heat-resistant, with solder-free pins and sockets; connection to breadboards and GPIO headers; and 2.54 mm pitch ends for standard pin headers.

GERUI’s title and box

One type in the title, three in the box. The title says male to female; the second bullet includes all three. The contents list is the more complete description.

GERUI’s lengths

Two lengths are given for three ribbons, and the listing does not say which ribbon is which length. The product photograph shows one long ribbon and two short ones.

Availability

At the last look-up, the German, French and Spanish Amazon stores were asking 6 € to 8 €.

The asking price on the Italian Amazon store ran past 1.6× the lowest country’s. A gap that size points to goods shipped in from abroad rather than a local seller, so that offer is left out of the figures above.

The American and British Amazon catalogues list the product, yet no seller was offering it.

Every figure here is Keepa’s reading on the date this page was last updated. Stock and prices can change at any time.

Prices quoted in this text were read on 15 September 2026. The live price is at the top of the page.

More breadboards and jumper wires

  • Three equal-length rainbow jumper ribbons: socket to socket, socket to pin and pin to pin

    ELEGOO Jumper wires 3 × 40, 20 cm, M-M, F-M and F-F

    Three 40-wire ribbons of 20 cm jumper wires from ELEGOO — female to female, male to female and male to male — in many colours for following a circuit, separable into single wires.

    Tie points
    Absent from the listing — wires only
    Power rails
    Absent from the listing
    Contact quality
    Absent from the listing
    Backing
    Absent from the listing
    Wire types and lengths
    40 female-female, 40 male-female, 40 male-male; 20 cm, third and fourth bullets
    Gauge
    Absent from the listing
    Pack contents
    3 ribbons of 40 wires, fourth bullet
    Amazon reference
    B01EV70C78 (same reference on 3 Amazon marketplaces)
    EAN
    0719377200424
    • All three end types
    • Many colours for tracing a circuit
    • One length only: 20 cm

    Best for: A breadboard user who wants one length of each wire type from the same maker as their board.

    ≈ $7 / £6 / 7 €
    Check price on Amazon
  • Two 400-point and two 830-point breadboards beside three rainbow jumper ribbons

    HUAREW Breadboard kit: 2 × 830 and 2 × 400 boards, 40-pin F-F, F-M and M-M jumper ribbons

    A breadboard kit from HUAREW with two 830-point and two 400-point breadboards that take 20–29 AWG (0.3–0.8 mm) wire, and 40-pin ribbons of female-female, female-male and male-male jumpers with 10-strand copper conductors.

    Tie points
    2 × 830-point and 2 × 400-point breadboards, fifth bullet
    Power rails
    Absent from the listing
    Contact quality
    Neat pin holes; metal pins that do not bend easily, first bullet
    Backing
    Absent from the listing
    Wire types and lengths
    40-pin F2F, F2M and M2M ribbons, fifth bullet; 21 cm in the title; 10-strand braided copper in plastic sleeving, third bullet
    Gauge
    Boards accept 20–29 AWG (0.3–0.8 mm) wire, second bullet
    Pack contents
    2 × 830 and 2 × 400 breadboards, 3 × 40-pin jumper ribbons, fifth bullet
    Amazon reference
    B0B5TCKTQH (same reference on 5 Amazon marketplaces)
    EAN
    0762917155524
    • Four breadboards
    • Wire range the boards take: 20–29 AWG
    • Jumper length only in the title

    Best for: A classroom or maker who keeps several circuits built at once.

    ≈ £13 / 13 €
    Check price on Amazon
  • Six spools of wire in black, blue, green, white, yellow and red on a TUOFENG box

    TUOFENG 22 AWG UL1007 solid hook-up wire, 6 colours × 9 m

    Six 9 m spools of 22 AWG UL1007 solid hook-up wire from TUOFENG, tinned copper in 0.010 in PVC insulation rated 300 V and 80 °C with a VW-1 flame rating, in red, black, green, yellow, blue and white.

    Tie points
    Absent from the listing — wire only
    Power rails
    Absent from the listing
    Contact quality
    Solid tinned copper conductor, first and fifth bullets
    Backing
    Absent from the listing
    Wire types and lengths
    Solid hook-up wire, 6 spools of 9 m (30 ft), fifth bullet
    Gauge
    22 AWG, 0.32 mm², title and first bullet
    Pack contents
    6 spools: red, black, green, yellow, blue, white, fifth bullet; PVC 0.010 in, 300 V, 80 °C, VW-1, second and fourth bullets
    Amazon reference
    B07V5FVSYL (same reference on 5 Amazon marketplaces)
    EAN
    0607994214750
    • Ratings given: 300 V, 80 °C, VW-1
    • Solid 22 AWG, a common breadboard size
    • Must be cut and stripped

    Best for: A maker who cuts jumpers to exact length for neat breadboard and perfboard wiring.

    ≈ £16 / 18 €
    Check price on Amazon

Elsewhere on the workbench

  • YOOPAI green plate printed PLA/PETG and Cool Plate Ultra Tack along its front edge

    YOOPAI Cold plate 257 × 257 mm for Bambu Lab 3D printers, with identification code

    A green 257 × 257 mm cold-print plate for Bambu Lab 3D printers that grips PLA at 45–55 °C and PETG at 50–70 °C, with an identification code for the X1C and X1E, a scraper, and a warning against ABS and TPU.

    Size and fit
    257 × 257 mm for Bambu Lab A1, P2S, X2D, P1P, P1S, X1C and X1E, title and fourth bullet
    Substrate
    Flexible steel plate, third bullet
    Surface type
    Textured cold-print surface, green, title and third bullet; identification code for automatic bed levelling on X1C and X1E, fourth bullet
    Magnetic base
    Absent from the listing
    Filament suitability
    PLA at 45–55 °C and PETG at 50–70 °C; not recommended for ABS or TPU, second bullet
    Heat limit
    Absent from the listing
    Amazon reference
    B0FNMPXGFP (same reference on 6 Amazon marketplaces)
    EAN
    0850078714053
    • Bed temperatures given per material: PLA 45–55 °C, PETG 50–70 °C
    • An identification code for X1C and X1E automatic bed levelling
    • Not recommended for ABS or TPU

    Best for: A Bambu Lab 3D printer owner printing large PLA and PETG parts who wants lower bed temperatures and less warping.

    ≈ $18 / £18 / 15 €
    Check price on Amazon
  • Ten bright steel 4-flute end mills from 2 to 12 mm, shanks stamped SWT with sizes and HSS-AL

    AFUNTA HSS 4-flute end mill set, titanium coated, 10 pieces, 2–12 mm

    Ten 4-flute high-speed steel end mills from AFUNTA with titanium coating, straight shanks and a U-shaped flute with a large rake angle, from 2 to 12 mm, for side, end and face milling of steels, cast iron and titanium.

    Shank diameter
    Absent from the listing — straight shank, title
    Cutting diameter and length
    2, 3, 4, 5, 6, 7, 8, 9, 10 and 12 mm, fifth bullet; no lengths
    Flute count
    4 flutes, title
    Helix direction
    Absent from the listing — U-shaped flute with a large rake angle, third bullet
    End shape
    Absent from the listing
    Coating
    Titanium coating on high-speed steel, second and fourth bullets; the cutters in the product photograph show bright steel with no coating colour
    Material suitability
    Carbon, alloy, die and tool steels, cast iron and titanium, first bullet; wood and aluminium in the title
    Amazon reference
    B07DQL66VF (same reference on 6 Amazon marketplaces)
    EAN
    0783710282415
    • Titanium coating stated
    • Flute shape described: U-shaped, large rake angle
    • No shank sizes or lengths

    Best for: A benchtop mill owner cutting steel who wants coated HSS in common sizes.

    ≈ $17 / £19 / 21 €
    Check price on Amazon
  • Eight dark-coated 4-flute end mills standing in blue plastic caps, one in a clear tube

    ASZLBYM Carbide 4-flute end mill set, 8 pieces, 2–12 mm

    Eight 4-flute end mills from ASZLBYM in tungsten carbide stated at HRC45, from 2 to 12 mm, with a negative rake edge, a large core for rigidity and large flutes for chip clearance, sold for metalworking and CNC machining, with HSS also in the title.

    Shank diameter
    Absent from the listing
    Cutting diameter and length
    2, 3, 4, 5, 6, 8, 10 and 12 mm, first bullet; no lengths
    Flute count
    4 flutes, title
    Helix direction
    Absent from the listing — spiral cutter in the title
    End shape
    Square (“Vierkant”), fourth bullet
    Coating
    Absent from the listing text — tungsten carbide stated at HRC45, second bullet, “HSS” also in the title; the product photograph shows dark-coated flutes
    Material suitability
    Metalworking, CNC machining and mechanical engineering, fourth bullet
    Amazon reference
    B0C55FBCNP (same reference on 6 Amazon marketplaces)
    EAN
    0739240119172
    • Tungsten carbide described, with its composition
    • Large core and large flutes, as the third and fourth bullets say
    • HSS and carbide both in the title

    Best for: A benchtop mill owner who wants carbide cutters and can confirm the material and shank sizes on arrival.

    ≈ 52 €
    Check price on Amazon

All breadboards and jumper wires